FIAT PROFESSIONAL 3 in 1 Laser Distance Meter Pro with Measuring User Manual

June 9, 2024
FIAT PROFESSIONAL

FIAT PROFESSIONAL 3 in 1 Laser Distance Meter Pro with Measuring

FIAT-PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-Measuring-
product

Safety

READ THIS MANUAL CAREFULLY BEFORE STARTING OR USING THE DEVICE. ALWAYS STORE THE MANUAL IN THE IMMEDIATE VICINITY OF THE DEVICE OR ITS SITE OF USE.

WARNING

  • Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
  • Do not use the device in potentially explosive rooms or areas and do not install it there.
    • Do not use the device in an aggressive atmosphere.
    • Do not immerse the device in water. Do not allow liquids to penetrate into the device.
    • The device may only be used in dry surroundings and must not be used in the rain or at a relative humidity exceeding the operating conditions.
    • Protect the device from permanent direct sunlight.
    • Do not remove any safety signs, stickers or labels from the device. Keep all safety signs, stickers and labels in legible condition.
    • Do not open the device.
    • Avoid looking directly into the laser beam.
    • Never point the laser beam at people or animals.
    • Only use the device, if sufficient safety precautions were taken at the surveyed location (e.g. when performing measurements along public roads, on building sites etc.).
    • Otherwise do not use the device.
    • Observe the storage and operating conditions (see Technical data).

INTENDED USE

Only use the device for measuring distances, areas and volumes by means of the integrated laser and within the measuring range specified in the technical data. Observe and comply with the technical data.

FORESEEABLE MISUSE
Do not use the device in potentially explosive atmospheres, or for measurements in liquids. Never point it at people or animals. Trotec accepts no liability for damages resulting from improper use. In such a case, any warranty claims will be voided. Any unauthorised modifications, alterations or structural changes to the device are forbidden.

INSTALLATION

FIAT-PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-
Measuring-fig- \(1\) FIAT-
PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-Measuring-fig-
\(2\) FIAT-
PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-Measuring-fig-
\(4\) FIAT-
PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-Measuring-fig-
\(5\) FIAT-
PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-Measuring-fig-
\(6\) FIAT-
PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-Measuring-fig-
\(7\) FIAT-
PROFESSIONAL-3-in-1-Laser-Distance-Meter-Pro-with-Measuring-fig-
\(8\)

PERSONNEL QUALIFICATIONS

People who use this device must:

  • be aware of the dangers that occur when working with laser measuring devices.
  • have read and understood the operating manual, especially the Safety chapter.

RESIDUAL RISKS

WARNING OF LASER RADIATION LASER CLASS 2, P MAX.: < 1 MW,’: 400-700 NM, EN 60825-1:2014
Do not look directly into the laser beam or the opening from which it emerges. Never point the laser beam at people, animals or reflective surfaces. Even brief eye contact can lead to eye damage. Examining the laser output aperture by use of optical instruments (e.g. magnifying glass, magnifiers and the like) entails the risk of eye damage. When working with a laser of class 2, observe the national regulations on wearing eye protection.

WARNING
Risk of suffocation!
Do not leave the packaging lying around. Children may use it as a dangerous toy.

WARNING
The device is not a toy and does not belong in the hands of children.

WARNING
Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications!

CAUTION
Keep a sufficient distance from heat sources.

NOTE
To prevent damages to the device, do not expose it to extreme temperatures, extreme humidity or moisture.

NOTE
Do not use abrasive cleaners or solvents to clean the device.

DISPOSAL

  • The icon with the crossed-out waste bin on waste electrical or electronic equipment stipulates that this equipment must not be disposed of with the
    household waste at the end of its life. You will find collection points for free return of waste electrical and electronic equipment in your vicinity. The addresses can be obtained from your municipality or local administration.

  • The separate collection of waste electrical and electronic equipment aims to enable the re-use, recycling and other forms of recovery of waste equipment as well as to prevent negative effects for the environment and human health caused by the disposal of hazardous substances potentially contained in the equipment.

  • In the European Union, batteries and accumulators must not be treated as domestic waste, but must be disposed of professionally in accordance with Directive 2006/66/ EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements.

2021 Manufactured under the license of FCA Italy S.p.A. Fiat Professional is a trademark of and licensed by FCA Group Marketing S.p.A.
Imported/Distributed by The Investment Company Europe B.V. exclusively developed for sales in the Netherlands, Belgium, and Luxembourg.
www.alleenonline.nl
www.alleenonline.be

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals