AGPTEK Fast Charge Wireless Charging Stand SW10 User Manual
- June 6, 2024
- AGPTEK
Table of Contents
AGPTEK Fast Charge Wireless Charging Stand SW10 User Manual
Preface
Thank you for purchasing our company’s product. For optimum operation, please read this manual carefully before use. If you have any problem about this device, please feel free to contact support@agptek.com.
Product Details
- Wireless Charging Area 1 (Phone)
- Wireless Charging Area 2 (TWS)
- Watch Charging Holder (iWatch)
- Indicator Light
- USB-A Port for Watch Charger
- Type-C Charging Port
Specifications
- Input: DC 9V-3A or 27W Min
- Output 1: 15W Max (Phone)
- Output 2: 5W Max (TWS)
- Output 3: 3.5W Max (iWatch)
- Size: 11570124 mm
How It Works
Power Indicator Light Instruction
LED Indicator
| Status
---|---
Flashing sky blue and green for once orderly|
Connect to power
Solid green
| Charging phone
Solid blue|
Charging TWS earphones
Solid sky blue
| Charging phone + TWS earphones
Flashing green|
Have metallic foreign objects (FOD detection)
Installation of Watch Charger
Charging watch separately requires the use of the original Apple Watch power adapter.
- Take off the watch charging holder part. It needs to be pushed up from the bottom when it is removed.
- Install the watch charger into the holder, then wrap the charging cord around the cable slot and fix it. The USB port is exposed from the slot at the bottom.
- Place the holder with watch charger back to its original position. It should be aligned with the slot and pushed down from the top to secure the holder part. In addition, ensure that the USB plug is fully inserted into USB-A port. 4. The installation is complete.
Notice
- For the fast and safe charge, please use a Quick Charge 2.0 or 3.0 Wall Charger.
- All devices supporting wireless charging function, can use the product to charge.
- Charging time (Wireless) VS Charging time (Wired): The power of wireless charging stand is 15W max (iPhone supports max. 7.5W power, and most Android phones support 10W power), but the power of wired charger is at least 10W. Thus, the wireless charging stand will take longer to charge than the wired charger.
- It is a normal phenomenon that the wireless charging stand will be fever during charging. Please kindly note that take off the device after full charge to protect your device and the wireless charging stand.
- If there is a charge interruption situation during charging, please check if the phone is shifting or the charging cable is loose.
Attention: If the three charging areas are used at the same time, the input should not be less than 9V-3A, and you need to use PD3.0, or QC4.0 or higher power adapters.
Product And Safety Info
- Do not store or use it in high temperature, humidity or dirty areas.
- Do not store/use it in strong magnetic fields.
- Keep it out of the reach of children. 4. Do not expose it to water or heavy dust. Keep it dry and clean.
- Non-professionals are not allowed to dissemble and repair it without authorization.
Package List
- 1 x Wireless Charging Stand
- 1 x USB Charging Cable
- 1 x User Manual
Manufacturer:
Shenzhen Lontems Technology Co.,Ltd.
Address:
4/F, 2nd West District, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen City
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>