MAXXMEE 00901 Haartrockner Twist & Dry Hair Dryer Instructions

June 6, 2024
MAXXMEE

maxme logo

MAXXMEE 00901 Haartrockner Twist & Dry Hair Dryer

MAXXMEE 00901 Haartrockner Twist & Dry Hair Dryer

Operating Instructions

Dear Customer,
We are delighted that you have chosen our MAXXMEE Twist & Dry Hair Dryer. One single movement turns the traditional hair dryer into a specialist for long hair and opens up the hot air channel for all-round drying. This allows the heat to get to your hair on both sides and it also dries in the direction of the hair – gently, effi ciently and in a very short time!
If you have any questions about the device and about spare parts/accessories, contact the customer service department via our website: www.dspro.de/kundenservice
We hope you have a lot of fun with your MAXXMEE Twist & Dry Hair Dryer.
Information About the Operating Instructions
Before using the device for the first time, please read through these operating instructions carefully and keep them for future reference and other users. They form an integral part of the device. The manufacturer and importer do not accept any liability if the information in these operating instructions is not complied with.

SYMBOLS

image

SIGNAL WORDS
Signal words indicate hazards if the associated notices are not followed.
DANGER – high risk, results in serious injury or death
WARNING – medium risk, may result in serious injury or death
CAUTION – low risk, may result in minor or moderate injury
NOTICE – may result in risk of damage to material

INTENDED USE

  • This device is intended to be used exclusively for blow-drying human head hair. It is not suitable for synthetic wigs.
  • Suitable for use on wet, towel-dried and dry hair.
  • The device is suitable for personal use only and not for commercial applications.
  • Use the device only for the specifi ed purpose and as described in the operating instructions. Any other use is deemed to be improper. Incorrect operation and incorrect handling may cause faults with the device and cause injury to the user.
  • The warranty does not cover faults caused by incorrect handling, damage or attempted repairs. The same applies to normal wear and tear.

SAFETY NOTICES

  • This device may be used by children aged 8 and over and by people with reduced physical, sensory or mental abilities or a lack of experience and/or knowledge if they are supervised or have received instruction on how to use the device safely and have understood the dangers resulting from failure to comply with the relevant safety precautions.

  • Children must not play with the device.

  • Cleaning and user maintenance must not be carried out by children, unless they are supervised.

  • Children younger than 8 years of age and animals must be kept away from the device and the connecting cable.
    WARNING : Do not use this device near a bathtub, shower or any vessel containing water. Never use while bathing or showering!

  • Do not make any modifi cations to the device. Also do not re-place the connecting cable yourself. If the device or the connecting cable of the device are damaged, they must be replaced or repaired by the manufacturer, customer service department or a specialist workshop in order to avoid any hazards.
    DANGER – Danger of Electric Shock

  • Use and store the device only in closed rooms.

  • Do not operate the device in rooms with high humidity.

  • Never immerse the device in water or other liquids! Ensure that the device and the connecting cable cannot fall into water or become wet.

  • If the device falls into water while it is connected to the mains power, do not touch it, but pull the mains plug out of the plug socket immediately! Only after this should you retrieve the device from the water.

  • Never touch the device and the connecting cable with wet hands when the device is connected to the mains power.
    WARNING – Danger of Fire Do not use the device in rooms containing easily ignitable or explosive substances (e.g. hairspray).

  • Keep combustible materials, e.g. cardboard, plastic or paper, away from the device and never place the device down on combustible objects or surfaces during and after operation.

  • Unwind the connecting cable fully before connecting up the device.

  • Do not leave the device unattended while it is switched on.

  • Do not connect the device along with other consumers (with a high wattage) to a multiple socket in order to prevent overloading and a possible short circuit (fi re).
    WARNING – Danger of Injury

  • Keep children and animals away from plastic bags and fi lms. There is a danger of suffocation. The device will get hot during use! Be careful when handling the device. Only ever hold it fi rmly by the handle. There is a danger of burns!

  • Make sure that the connecting cable does not present a trip hazard. There is a danger of falling over it.

  • Keep the connecting cable away from small children and animals. There is a danger of strangulation!
    NOTICE – Risk of Damage to Material and Property

  • Only connect the device to a plug socket that is properly installed. The plug socket must also be readily accessible after connection so that the connection to the mains can quickly be isolated. The mains voltage must match the data on the rating plate of the device.

  • The device must be switched off when inserting or removing the mains plug.

  • Make sure that the connecting cable is not squashed, bent or laid over sharp edges and does not come into contact with hot surfaces (e.g. of the device).

  • Switch off the device and pull the mains plug out of the plug socket if an error occurs during operation or before a thunderstorm.

  • When the mains plug is pulled out of the plug socket, always pull on the mains plug and never the mains cable.

  • Do not pull or carry the device by the connecting cable. Never wind it around the device.

  • Never place heavy objects on the device or the connecting cable.

  • Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persistent moisture, wet conditions and impacts.

  • Do not use the device if it has malfunctioned, fallen or been dropped into water. Have it checked in a specialist workshop before using it again.

ITEMS SUPPLIED
1 x hair dryer 1 x operating instructions Check the items supplied for transport damage. If you fi nd any damage, do not use the device but contact our customer service department. Remove any possible fi lms, stickers or transport protection from the device. Never remove the rating plate and any possible warnings!

AT A GLANCE

product parts

  1. Air tunnel
  2. Dial for air tunnel (closed O /open II)
  3. Handle
  4. Kink protection and hanging lug
  5. On / Off switch & air fl ow (0 / / )
  6. Heat level (I / II/ III)
  7. Cold level

OPERATION

0 – OFF
Normal air fl ow (gentle drying)
Fast air fl ow (fast drying)
I – Heat level 1 (fi ne / smooth hair)
II – Heat level 2 (normal / slightly wavy hair)
III – Heat level 3 (thick / curly hair)
Cold level

USE

Please Note!
Keep the tunnel opening away from the face, in particular the eyes. Also maintain a safe distance between the head and tunnel opening of at least 3 – 5 cm.

We recommend that you use a heat protection spray to protect the hair from the heat. In addition, mousse can be used for styling. Ideally do not use any other styling products such as hair spray or gel. They may clog up the heating plates in the air tunnel.

  1. Fully unwind the connecting cable and connect the mains plug to an easily accessible plug socket.

  2. Before using the device, comb through the hair to make sure there are no knots in the hair.

  3. Turn the dial (2) to the position you want:
    O – the air tunnel (1) is closed
    II – the air tunnel is open

  4. Move the On / Off switch (6) to position or to switch on the device (see the “Operation” chapter).

  5. Select the heat level you want (7) (see the “Operation” chapter).

  6. Wait a moment until the air fl ow has heated up. You can now start using the device.

  7. Divide the hair into sections. Place the hair in the air tunnel or guide the device over the hair. Do not hold the hair in the air tunnel for too long or hold the device in one spot for too long; this can damage the hair!

  8. If necessary, press the cold level (8) to cool down the air fl ow.

  9. Repeat the process until the result is satisfactory
    The thicker the hair, the thinner sections should be placed in the air tunnel to get the result you want.

  10. To switch off the device, move the On / Off switch to the 0 position.

  11. Pull the mains plug out of the plug socket and allow the device to cool down.

  12. Allow the hair to cool and only then finish styling it with styling products.

CARE AND STORAGE

Please Note!
Do not use any sharp or abrasive cleaning agents or cleaning pads. These may damage the surfaces.

  1. Allow the device to cool down completely.
  2. Remove any hair from the air tunnel (1).
  3. Wipe down the device with a soft, damp cloth.
  4. Then dry with a soft cloth.
  5. Store the device in a dry, frost-free place so that it is protected from sunlight and is out of the reach of children and animals.

TROUBLESHOOTING

If the device does not work properly, check whether you are able to rectify the problem yourself. If the problem cannot be solved with the steps listed, contact the customer service department.
Do not attempt to repair an electrical device yourself!
The device does not work.
The mains plug is not inserted in the plug socket correctly.

  • Correct the fit of the mains plug. The plug socket is defective.
  • Try another plug socket. There is no mains voltage.
  • Check the fuse of the electrical distributor (fuse box).  Smell produced  The device is being used for the first time.
  • A smell often develops when new devices are first used. The smell should disappear once the device has been used several times.

Steam produced
The device is being used on wet hair.
This is moisture evaporating from your hair.

TECHNICAL DATA

Article number: 00901
Model number : AT-2513
Power supply: 220 – 240 V ~ 50 – 60 Hz
Power: 1800 – 2000 W
Protection class: II
ID of operating instructions: Z 00901 M DS V1 1120 uh

DISPOSAL
Dispose of the packaging material in an environmentally friendly manner so that it can be recycled.

This device is governed by the Euro-pean Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE). Do not dispose of this device as normal domestic waste, but rather in an environmentally friendly manner via an offi cially approved waste disposal company.

Kundenservice / Importeur | Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin Deutschland | Germany
Tel.: +49 38851 314650 *

  • Anruf in das deutsche Festnetz zum Tarif Ihres Anbieters.
    Calls to German landlines are subject to your provider’s charges.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals