CANARM DL-11C-15FC Flush Mount Ceiling Light Installation Guide
- June 6, 2024
- CANARM
Table of Contents
Model Number: DL-11C-15FC, DL-11C-22FC
DL-15A-30FC, DL-15C-30FC
INSTALLATION INSTRUCTIONS
Components
Important Safety Information
Please read these instructions carefully before attempting to install this
product. It is advisable to keep these instructions in a safe place for
further reference.
WARNING: All electrical connections must be in accordance with local and
National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
WARNING: RISK OF SHOCK electric current can cause painful
A. Turn off the power supply at the fuse or circuit breaker box before you
shock or serious injury unless installing the fixture.
B. Ground the fixture to avoid potential electric shocks and to ensure
reliable starting.
C. Double-check all connections to be sure they are tight and correct.
D. Wear rubber-soled shoes and work on a sturdy wooden ladder.
Maintenance & Care
- Ensure that the power is disconnected prior to cleaning.
- To keep the finish of this product, wipe it over with a soft cloth periodically.
- Do not use harsh chemical solvents, it may discolor or damage the finish.
Preparation for Installation
- Read these instructions carefully before attempting to install this product.
- Disconnect electrical power before installing or servicing any part of this fixture.
- Place fixture on a clean flat surface.
WARNING: Risk of fire. Use only on 120-volt 60Hz circuits. Suitable for
wet locations. Before installing your lighting fixture, thoroughly review the
enclosed installation manual.
CAUTION: TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE INSTALLING
THE FIXTURE, IN ORDER TO PREVENT POSSIBLE SHOCK.
This fixture is designed for use in a circuit protected by a fuse or circuit
breaker.
It is also designed to be installed in accordance with local electrical codes.
If you are unsure about your wiring, consult a qualified electrician or local
electrical inspector, and check your local electrical code.
WARNING: RISK OF CUTS Some metal parts in the fixture may have sharp
edges. To prevent cuts and scrapes, wear gloves when handling the parts.
CAUTION: FOR WET LOCATION INSTALLATION ON UNEVEN SURFACE, ADD GASKET OR
CAULKING COMPOUND ON BACK OF FIXTURE FOR SEAL AGAINST MOUNTING SURFACE.
Installation
CAUTION
WARNING: Risk of fire. Use only on 120-volt 60Hz circuits. Suitable for
wet locations. Before installing your lighting fixture, thoroughly review the
enclosed installation manual. If you do not have sufficient electrical wiring
experience, please have your fixture installed by a qualified licensed
electrician.
All electrical connections must be in accordance with Local and National
Electrical Code (NEC) Standards. Reliable operating temperature is 0°F–120°F.
If flickering occurs in low-level dimming, increase light level. Dimmable with
LED compatible dimmer.
Compatible dimmers: LEVITON# 742-6672-HLW, LEVITON# 722-6674-PDW, LUTRON #
SCL-153PH-WH
DL-11C-15FC: Max # of Lamps per 150W Dimmer: 9 pcs
DL-11C-22FC: Max # of Lamps per 150W Dimmer: 5 pcs
DL-15A-30FC, DL-15C-30FC: Max # of Lamps per 150W Dimmer: 4 pcs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>