SPORTON H170 SAR Test Setup Instructions

SPORTON H170 SAR Test Setup

Head Exposure Condition

Hotspot Exposure Condition

Body-worn Exposure Condition

Product Specific 10g SAR

Antenna Location

Front View

Distance of the Antenna to the EUT surface/edge

Antennas| Back| Front| Top Side| Bottom Side| Right Side| Left Side
Antenna 0| ≤ 25mm| ≤ 25mm| >25mm| ≤ 25mm| ≤ 25mm| ≤ 25mm
Antenna 1| ≤ 25mm| ≤ 25mm| ≤ 25mm| >25mm| ≤ 25mm| ≤ 25mm
Antenna 2| ≤ 25mm| ≤ 25mm| ≤ 25mm| >25mm| >25mm| ≤ 25mm
Antenna 3| ≤ 25mm| ≤ 25mm| ≤ 25mm| >25mm| ≤ 25mm| >25mm

Positions for SAR tests; Hotspot mode

Antennas| Back| Front| Top Side| Bottom Side| Right Side| Left Side
Antenna 0| Yes| Yes| No| Yes| Yes| Yes
Antenna 1| Yes| Yes| Yes| No| Yes| Yes
Antenna 2| Yes| Yes| Yes| No| No| Yes
Antenna 3| Yes| Yes| Yes| No| Yes| No

Note: Referring to KDB 941225 D06 v02r01, when the overall device length and width are ≥ 9cm*5cm, the test distance is 10 mm. SAR must be measured for all sides and surfaces with a transmitting antenna located within 25mm from that surface or edge.

Customer Support

S porton International Inc. (Shenzhen)
TEL : +86-755-86379589 / FAX : +86-755-86379595
FCC ID : 2ACCJH170

Documents / Resources

| SPORTON H170 SAR Test Setup [pdf] Instructions
2ACCJH170, 2ACCJH170, h170, H170 SAR Test Setup, SAR Test Setup, Test Setup
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>