SEALEY MK81 Adjustable Bumper Stand Instruction Manual
- June 22, 2024
- SEALEY
Table of Contents
SEALEY MK81 Adjustable Bumper Stand
Product Information
Specifications:
- Model No: MK81
- Minimum Arm Width: 1150mm
- Maximum Arm Width: 1650mm
Product Usage Instructions
Safety:
- Keep the work area clean and tidy at all times.
- Use on a stable, level, and dry surface.
- Tie long hair back when using the tool.
- Avoid wearing loose clothing when using this tool.
- Familiarize yourself with the product before use.
- DO NOT allow unauthorised persons to use the product.
- DO NOT allow children to use the product.
- DO NOT use as a climbing frame or anchor point.
FAQ:
-
Q: What should I do if any parts are missing or damaged?
A: Contact your Sealey stockist immediately for assistance in obtaining replacement parts. -
Q: How should I dispose of the product when it is no longer usable?
A: When the product becomes completely unserviceable, drain any fluids into approved containers and dispose of both the product and fluids according to local regulations.
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE.
SAFETY
- Keep the work area clean and tidy at all times.
- Use on a stable, level and dry surface.
- Tie long hair back when using the tool.
- Avoid wearing loose clothing when using this tool.
- Familiarise yourself with the product before use.
- DO NOT allow unauthorised persons to use the product.
- DO NOT allow children to use the product.
- DO NOT use as a climbing frame or anchor point.
INTRODUCTION
Stand rotates 90° and locks in place to best suit trim removal, plastic repairs, sanding, priming or painting. Fitted with clamps designed to hold the inside of the bumper without touching the painting surface. Arms adjusts from 115cm to 165cm to fit bumpers and other panels. Bumper stand includes foam- cushioned support arms to protect the items on the stand. Fitted with four castors, two with brakes for maximum manoeuvrability and safe positioning.
SPECIFICATION
- Model No: ………………………………………………………MK81
- Minimum Arm Width: …………………………………… 1150mm
- Maximum Arm Width: ………………………………….. 1650mm
ASSEMBLY
- Refer to the attached parts diagram to assemble the product.
- If any parts are missing or damaged, contact your Sealey stockist immediately.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: The guarantee is 12 months from the purchase date, proof of
which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>