FIELDSHEER MWUS0721 Heated Gear Premium BT Heated Insole User Manual
- June 6, 2024
- FIELDSHEER
Table of Contents
Heated Gear
Premium BT Heated Insole User Manual
INTRODUCTION
Thank you for purchasing our battery-powered Bluetooth Heated Insoles. To
ensure optimal performance of your Bluetooth Heated Insoles, please carefully
read through this user manual prior to using the garment.
To keep up with our latest product information, please take a few minutes to
register your product at fieldsheer.com/product-
registration
You can also find other great Fieldsheer® products at
www.fieldsheer.com
http://Fieldsheer.com/product-registration
TECHNOLOGY
Proprietary Fieldsheer® powered by Mobile Warming® technology is specially engineered for cold weather conditions. Mobile Warming®’s comprehensive heating technology keeps you warm and comfortable in all weather conditions. Our exclusive heating technology utilizes ultra-fine fiber elements powered by lightweight, rechargeable, Lithium-Ion batteries. As heat builds, Mobile Warming® technology reflect and directs heat back towards the body ensuring that you stay warm. The combination of unique materials, construction techniques, and innovative design results in the most advanced heated gear available.
Refer to your garment care label for care details
- Spot cleaning only. dry flat
- Do Not Fully submerge in water
- No bleach, iron and wring
- Fully dry before turning on.
- Fully charge the battery every 3-6months.
- Turn off in case of excessive temperature and when not in use.
BATTERY USE
Mobile Warming®’s powerful lithium-ion battery technology was designed and engineered to provide you with safe and reliable power, allowing you to be warm and comfortable. Please follow the instructions below to optimize your lithium-ion battery
USB CHARGING BATTERY
To charge your battery, use the supplied micro-USB cable. Connect the USB end to your computer or any USB-powered source like the USB wall adaptor included with your phone or tablet.
Do not use your heated insole if you notice a change of shape (lumps) due to
internal battery over-heating when charging or if rust or corrosion is found.
Use only the charging adaptor provided with your product to charge your
battery.
Never dispose of batteries in the garbage. Disposal of batteries in the
garbage is unlawful under state and federal environmental laws and
regulations. Always take used batteries to your local battery recycling
center.
**** This product contains chemicals known to the state of California to
cause cancer and birth defects or other reproductive harm For more information
visit www.P65warnings.ca.gov
IMPORTANT: This product is intended to be used by an adult and therefore
it is sole responsibility of the purchaser to follow
detailed instructions and warnings. The Purchaser agrees to indemnify the
Manufacturer for any unintended use/misuse.
- Avoid running Lithium-Ion batteries completely dead. This will result in performance problems and reduced battery life.
- Avoid allowing your Micro-USB or DC Jack ports from being contaminated with debris that could interfere with operation. Suggest checking ports before each use.
- Lithium-Ion batteries by nature have diminished capacity output in extremely cold temperatures. We recommend keeping batteries away from extreme temperatures to maximize battery performance.
- Do not allow Mobile Warming battery(s) to come in contact with water or liquids. If water or other liquids enter the battery interior, immediately unplug the battery from the garment. Do not use if you feel the battery is compromised.
BATTERY STORAGE
-
Power of the battery(s) if applicable.
-
Fully charge the battery(s) prior to storage
-
Keep battery(s) in a cool dry place out of direct sunlight
-
Charge every 6 months to maintain battery life.
It is important to keep your battery charged -
Do not store Mobile Warming batteries below – 4℉ (- 20 ℃)
QUICK START GUIDE
- To charge your heated insoles, plug the included dual Micro USB cable into the micro USB port on the side of each insole. Plug the USB-A to your computer or any USB powered source like the USB wall adaptor included with your phone
- Charge for 4-6 hours. The Red LED light indicates charging. Blue LED light indicates fully charged
- To turn heated insoles on or off press the power button on side of the insoles.
- The LED light on side of the insole indicates the current heating level.
- Trim insoles to fit if necessary. Make sure not to trim insoles too short. you can use you existing shoe’s soles as a template. Do not cut the innermost trim line, to avoid damage of the internal heating system.
- Replace your shoe’s existing insole with your heated insoles.
- MW CONNECT™ APP
Allows you to control your Bluetooth® enabled garment with your mobile device.
https://www.facebook.com/MobileWarming/videos/388753195177098/
For more information or to see other products with Mobile Warming® technology, please visit us at mobilewarming.com
HEAT RATING
NOTE: Heat and time are estimated and may vary depending on conditions. Exposing batteries to extreme temperatures may impact these estimates.
Insoles Heat Ratings
Power Ratings Based on Fully Charged Battery
LEGAL & WARRANTY
LIMITED ONE YEAR WARRANTY
Any damage caused to any Fieldsheer® products by misuse, abuse, improper care,
accident, normal wear and tear, or the natural breakdown of materials over an
extended period of time and use are not covered in this warranty. Any
alterations or repairs (attempted or otherwise) performed on any Fieldsheer®
products voids any and all warranties offered by Fieldsheer® for that
particular item.
LEGAL
This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will do not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.
MODIFICATION: Any changes or modifications of this device could void the
warranty.
Fieldsheer®, Mobile Warming®, Stay Warm, Stay Comfortable, MW connect™ and its
related logos and images are property of
Tech Gear 5.7 Inc and/or its affiliated companies
FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. The device has been evaluated to meet general RF exposure
requirements.
IE: This device contains license-exempt transmitter(s)/receiver(s)/ that comply with Innovation Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines, This equipment should be. installed and operated with a minimum distance of 5mm the radiator your body. This device and its antenna(s) must not be co‐located or operation in conjunction with any other antenna or transmitter.
FOLLOW US
WWW.FIELDSHEER.COM
serial number
ONLINE REGISTRATION
|
---|---
1 YEAR
PRODUCT WARRANTY| U.S. BASED
CUSTOMER SERVICE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>