FIELDSHEER MWUS09 Bluetooth Heated Insoles User Manual

: May 15, 2024
: FIELDSHEER

Table of Contents

INTRODUCTION
GARMENT CARE
BATTERY USE
BATTERY MAINTENANCE
QUICK START GUIDE
HEAT RATINGS
LIMITED ONE YEAR WARRANTY
LEGAL
FCC Warning
ISED STATEMENT
ISED Compliance Label Requirements
ISED STATEMENT
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FIELDSHEER MWUS09 Bluetooth Heated Insoles

FIELDSHEER MWUS09 Bluetooth Heated Insoles

INTRODUCTION

Thank you for purchasing our battery powered Bluetooth Heated Insoles. To ensure optimal performance of your Bluetooth Heated Insoles, please carefully read through this user manual prior to using the garment.
To keep up with our latest product information, please take a few minutes to register your product at fieldsheer.com/product-registration You can also find other great Fieldsheer® products at www.fieldsheer.com
The function of Bluetooth in this product is to use Bluetooth app to connect heating products for temperature control and wireless adjustment.

Read registration card|
---|---
Scan registration card|
Complete register you information|

Proprietary Fieldsheer® powered by Mobile Warming® technology is specially engineered for cold weather conditions. Mobile Warming®’ s comprehensive heating technology keeps you warm and comfortable in all weather conditions. Our exclusive heating technology utilizes ultra-fine fiber elements powered by lightweight, rechargeable, Lithium-Ion batteries. As heat builds, Mobile Warming® technology reflect and direct heat back towards the body ensuring that you stay warm. The combination of unique materials, construction techniques, and innovative design results in the most advanced heated gear available.

Introduction

GARMENT CARE

Refer to your garment care label for care details

Spot cleaning only. dry flat
Do Not Fully submerge in water
No bleach, iron and wring
Fully dry before turning on.
Fully charge the battery every 3-6months.
Turn off in case of excessive temperature and when not in use.

Symbols

BATTERY USE

Mobile Warming®’s powerful lithium-ion battery technology was designed and engineered to provide you with safe and reliable power, allowing you to be warm and comfortable. Please follow the instructions below to optimize your lithium-ion battery usage.

USB CHARGING BATTERY

To charge your battery, use the supplied micro-USB cable. Connect the USB end to your computer or any USB powered source like the USB wall adaptor included with your phone or tablet.

Battery Use

Symbol Do not use your heated insole if you notice a change of shape (lumps) due to internal battery over-heating when charging or if rust or corrosion is found. Use only with the charging adaptor provided with your product to charge your battery

Never dispose of batteries in the garbage. Disposal of batteries in the garbage is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-recycling center

This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm For more information visit www.P65warnings.ca.gov

BATTERY MAINTENANCE

IMPORTANT: This product is intended to be used by an adult and therefore it is sole responsibility of purchaser to follow detailed instructions and warnings. The Purchaser agrees to indemnify Manufacturer for any unintended use/misuse.

Avoid running Lithium-Ion batteries completely dead. This will result in performance problems and reduced battery life.

Avoid allowing your Micro-USB or DC Jack ports from being contaminated with debris that could interfere with operation. Suggest to check ports before each use.

Lithium-Ion batteries by nature have diminished capacity output in extremely cold temperatures. We recommend keeping batteries away from extreme temperatures to maximize battery performance.

Do not allow Mobile Warming battery(s) to come in contact with water or liquids. If water or other liquids enter the battery interior, immediately unplug the battery from the garment. Do not use if you feel the battery is compromised.

BATTERY STORAGE

Power off battery(s) if applicable.
Fully charge battery(s) prior to storage
Keep battery(s) in cool dry place out of direct sunlight
Charge every 6 months to maintain battery life. It is important to keep your battery charged
Do not store Mobile Warming batteries below – 4℉ (- 20 ℃)

QUICK START GUIDE

To charge your heated insoles, plug the included dual Micro USB cable into the micro USB port on the side of each in sole. Plug the USB-A to your computer or any USB powered source like the USB wall adaptor included with your phone
Charge for 4-6 hours. Red LED light Indicates charging. Blue LED light indicates fully charged
To turn heated insoles on or off press and Hold button on side of insoles for 2 seconds.
The LED light on side of insole indicates the current heating level, which is usually Red for 100% High. Flashing blue light indicates Bluetooth pairing.
Trim insoles to fit if necessary. Make sure not to trim insoles too short. you can use you existing shoe’s soles as a template. Do not cut the inner most trim line, to avoid damage of the internal heating system.
Replace your shoe’s existing insole with your heated insoles.
MW CONNECT™

APP Allows you to control your Bluetooth® enabled garment with your mobile device.

Menu Icon

Add

**Connect

**

**Four Times

**

Complete

Turn On

HEAT RATINGS

NOTE: Heat and time are estimated and may vary depending on conditions. Exposing battery to extreme temperatures may impact these estimates.

1 Heat Zone

Insoles Heat Ratings
Power Ratings Based on Fully Charged Battery

LIMITED ONE YEAR WARRANTY

Field sheer Apparel Technologies warrants to the original purchaser of this Field sheer® branded product (the“ Product”) that the construction, electrical heating components and battery of the Product shall be free from factory defect in materials and workmanship for a period one (1) year from the date of original purchase when the Product is purchased from an authorized reseller and used as recommended by Field sheer Apparel Technologies. During the warranty period, Field sheer Apparel Technologies will, at its option and at no additional charge to you, repair or replace the Product, or any part of the Product, if it becomes defective, malfunctions, or otherwise fails to conform with this Limited One Year Warranty.

LEGAL

Any damage caused to any Fieldsheer® products by misuse, abuse, improper care, accident, normal wear and tear, or the natural breakdown of materials over an extended period of time and use are not covered in this warranty. Any alterations or repairs (attempted or otherwise) performed on any Fieldsheer® products voids any and all warranties offered by Fieldsheer® for that particular item.

Fieldsheer®, Mobile Warming®, Stay Warm, Stay Comfortable, MW connect™ and its related logos and images are property of Tech Gear 5.7 Inc and/or its affiliated companies.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Fieldsheer® Apparel Technologies is under license. Other trademarks and trade names are those of their respective owners

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1 : This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED STATEMENT

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.”

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Compliance Label Requirements

The label shall be permanently affixed to the EUT or displayed electronically and its text must be clearly legible. When the dimension of the device is too small or it is otherwise not practical to place the label on the EUT, the label shall be placed in a prominent location in the user manual supplied with the EUT. The user manual may be in an electronic format and must be readily available.

ISED STATEMENT

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada ‘s licence exempt RSS(s).
Operation is subject to the following two conditions:

this device may not cause interference and
this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation Exposure limits set forth for an uncontrolled environment to maintain compliance with IC’s RF Exposure guidelines. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

ISED Compliance Label Requirements

The label shall be permanently affixed to the EUT or displayed electronically and its text must be clearly legible. When the dimension of the device is too small or it is otherwise not practical to place the label on the EUT, the label shall be placed in a prominent location in the user manual supplied with the EUT. The user manual may be in an electronic format and must be readily available.

ISED STATEMENT：
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada ‘s licence exempt RSS(s). Operation is subject to the following two conditions: 1)this device may not cause interference and 2)this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation Exposure limits set forth for an uncontrolled environment to maintain compliance with IC’s RF Exposure guidelines. This device and its antenna(s) must not be co- located or operation in conjunction with any other antenna or transmitter.