OREiN OS0100167 WiFi RGBW LED Bulb User Guide
- June 6, 2024
- OREIN
Table of Contents
illuminate for a better life
WiFi RGBW LED Bulb
Quick User Guide
We appreciate the trust and confidence you have placed in OREIN through the
purchase of smart bulbs. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs.
Thank you for choosing OREIN
Basic Information
Suitable for damp locations.
For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lamp holders and may impair contact-making and lamp retention.
*The bulb is based on protocol WWI, realizing the function of on/off, , brightness dimming, tunable white, and RGB color changing.
CONTROL YOUR LIGHTS FROM ANYWHERE in the world from the palm of your
hand. The Origin produces beautiful high-quality light that you can dim, or
tune the light’s color temperature from 1800 to 6500K as well as RGBW color
changing with 16million colors and control from your smartphone or tablet.
Easy to set up, bulbs fit into your standard household sockets – no need for
installation by an electrician. A wireless network is required to operate
bulbs.
SET LIGHT SCENES: Create rich indirect light scenes in your home by dim.
Schedule to turn on the lights so you don’t come home to a dark house. Set
automated timers, or program the bulb to gradually increase brightness in the
morning like the sunrise for a more pleasant, natural alarm.
SAVE ENERGY: OREiN bulbs use up to 84% less energy than traditional
incandescent bulbs and last up to 25,000 hours making them a smart choice for
energy-conscious homes.
Quick Start Guide
The following are the general user guide
- Screw the bulb into a standard socket.
- Turn on the bulb with your wall switch to apply power to the bulb.lf you’re not using a wall switch, then use your alternate method to apply power to the bulb.
- Get the AiDot App for Android or iGS.http://apps.aidot.com
- Create an account and sign in, enable your location and open your Bluetooth.
- Press ‘+’ button to add the light bulb.
- Automatic discovery devices which to be added(through BLE protocol), then follow the instructions on App.
Resetting Bulb
Restore the bulb(s) to factory default by switching 6 times.
- Starting from wall switch OFF
- User flips the wall switch off and on 5x over between 1-2 seconds
- Light(s) finishes on
- Light blinks twice
- User connects light(s) to new network(remote)
Light(s) added to device list as new.
Or A after 5 min network close restarted by a wall switch. Then light(s) finishes on(step3)
Safety Instructions
Restore the bulb(s) to factory default by switching 6 times.
- Switch off the power supply to the socket and allow sufficient time for the bulb to cool before removing the bulb from the fitting
- Warning: Risk of Electric Shock. Do not attempt to disassemble the bulb
- Not suitable for use with standard wall dimmers
- Suitable for use in operation environment between -4°F and 104°F(-20°C and 40°C)
- Not for use in emergency lighting.
- The bulb is not suitable for totally enclosed fixtures.
- Do not clean the bulb when it is on and connected to the power supply
- Do not place the bulb on hot surfaces
- Dispose of this device in accordance with disposal laws in your area. \For additional help, regulatory and safety information, please go to: www.iorein.com
CAUTION:
– DO NOT USE WITH STANDARD DIMMERS, SEE INSTRUCTIONS -NOT FOR USE IN TOTALLY
ENCLOSED LUMINAIRES -SUITABLE FOR DAMP LOCATIONS -THIS DEVICE IS NOT INTENDED
FOR USE WITH EMERGENCY EXITS Only use the control provided with or specified
by these instructions tocontrol this lamp. This lamp will not operate properly
when connected to a standard (incandescent) dimmer or dimming control.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Recycle
SYVIO TECHNOLOGY CO., LIMITED
Room A, 8/F, KwokCheung Building, 635-637
Shanghai Street, Mong Kok, Hong Kong
300 Technology Court SE
Suite 100, Smyrna, GA 30082
FC 0 Recycle
678-293-8382
www.iorein.com
[email protected]