OREIN XTB009Y4C8001 LED Smarty Slim Recessed Lighting Instruction Manual

: June 6, 2024
: OREIN

Table of Contents

OREIN XTB009Y4C8001 LED Smarty Slim Recessed Lighting
IMPORTANT
SAFETY WARNINGS:
MOUNTING
REMOVAL
**Connect the APP
Resetting Bulb
Trouble Shooting
FCC WARNING
contact us
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OREIN XTB009Y4C8001 LED Smarty Slim Recessed Lighting

We appreciate the trust and confidence you have placed In OREIN through the purchase of recessed lighting. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing OREIN. •

IMPORTANT

RHd carefully before lnstalllng fixture. Retain lhua Instructions for future refarance.oRErN fixture must be wired in accordance with the National 8actrical COcla and all applicable local codes. Proper grounding II required for safety.

“THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED
“TO PREVENT ELECTRICAL SHOCK, POWER SHOULD BE TURNED OFF AT THE FUSE BOX BEFORE INSTALLATION

SAFETY WARNINGS:

Read all product labels and directions.

WARNING -Risk of fire or electric shock. LED Retrofit Kit Installation requires knowedge of luminaires
electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician .
WARNING· Risk of fire or electric shock. Install this kit only in the luminaires that have the construction
features and dimensions shown In the photographs and/or drawings and where the Input rating of the retrofit
kit does not exceed the input rating of the luminaire.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installationWARNING
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other
  sharp objects.

•Please examine ell parts that ere not intended to be replaced by the retrofit kit for damage and replace any
damaged parts prior to installation of the retrofit kit. Replace only with OREIN LED. Visit our website: www.
iorein.com. Call our experts at(678) 29Hl382. The recessed luminaire is intended for mounting only in a
the covered ceiling where only the led side of the luminaire will be exposed to damp or dry or wet locations.INSTALLATION
SHOULD ONLY BE PERFORMED AFTER POWER TO THE FlxnJRE HAS BEEN DISCONNECT·
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITSThese Instructions shall be Included
on en information sheet packaged with each unit.

WIRING

Cut en opening in the ceiling by using the provided template to trace the module opening (see Figure 1). The opening slze(9W 4Inch) ls 105mm and 13W 6Inch Is 155mm. Make sure the opening Is not larger than the outer flange of the LED module. 80pen the cover of the provided }-box and insert the supply wires through the preferred strain reliefs in the
provided jbox. Connect the bare copper (ground) wire from the ;-box to the ground wire of the supply connection using the provided wire nut.
Connect the black/white leads from the output of the driver to the appropriate supply side wiring using the provided wire nuts.
Close the cover after properly securing the supply wire to the provided j-box on the rear of the LED module.
Module Is ready to Install Into celling (See MOUNTING section for specific Instructions).

MOUNTING

reconnect the remote driver box to the light fixture. (Fig. 2)
place remote driver box thru the cut-out hole and mount according to local code required. (Flg. 3)
Bundle any excess wire and place into ceiling above the module according to loccote as required. ORotate
both mousetrap springs upward to allow passage through the cutout In the celling (Flg.4)
Contlnue to press the module through the cutout In the celling until the perimeter flange of the module Is flush against the ceiling. (Fig.5)
The spring will rotate back Into position and hold the LED module tight to the ceiling.(Flg.6)

REMOVAL

Simply pull down firmly on LED module until mousetrap springs release from the ceiling Reach through the ceiling to hold mousetrap springs up and away from the ceiling as you continue to pull the module from it’s opening.
Disconnect wiring .
“The model. can be installed directly Into a celling without requiring separate JBOX or received housing .

Installing support

**Connect the APP

**

Get the AiDot APP for Android or iOS
Create an account and sign in, enable your location and open your Bluetooth.
Press”+’ button to add the light bulb.
Automatic discovery devices which to be edded(through BLE protocol), then follow the instructions on
App.

Resetting Bulb

Restore the bulb(s) to factory default by -Itching 6 times

Starting from wall switch OFF
user flips the wall switch off and on 5x over between 1-2 seconds
Light(s) finishes on
ought blinks twice
user connects light(s) to new network(remote)
light(s) added to device list as new or after 5 min network close.restarted by wall switch
Then light(s) finishes on step3

Trouble Shooting

Q1: Why I cannot find the “AlDot’ APP In Google Play Store?
A: Please tap search instead for AiDot below then you’ll see our APP there. Google thought you were
searching for another well-known job search brand, and give priority to it to be displayed.
Q2.; Why I didn’t receive the v■rttlcatlon letter for Iha registration?
A: 1, Please check if you entered a wrong email address during the registration; 2.Check if the mail was stuck In the spam folder: 3. Make sure vou have realstered on the app Instead of the website.
Q3:I fallad to gel my ■mart bulb connac:t■d to the natwartf, what should I do?
: After ensuring the Wi-Fi of your home is 2.4G, we suagest ou resetting the bulb first. Turn on and off the
bulb consecutively for 6 times. turn It on again. It will run a coalor shift.

Re-add the bulb on the APP If you
fail again, don’t worry. It is not necessary the fault or bug on the product. There are multiple factors that can
influence the connection. Please contact our technical team via the contact details shown on the epp or the
package. We will check it for you.

Q4: How can I connect Iha bulb to Alen?
A: Step 1: Tap ‘Me” at the top left corner of Home page, select”Settings- Third-Party Services·, Alexa & Hey
Google”, Select ‘Amazon Alexa’. Step 2: Tap’Slgn In with Alexa. folow the oil- screen Instructions to link your account. When It says ‘Al Dot with Amazon Alexa successfully; it means the connection is done.Note: If you already have an Alexa APP account but have not signed in Alexa APP, tap ‘Sign in with Alexa’, it will take you to the sign-in page of Alexa APP . Step 3: If Alexa does not successfully add your AiDot devices (which must have been already added in AiDot APP), you can add them by saying “Alexa, discover device:
Q5: Why the app states ‘No Internet Access” when I select the WIFI of the bulb?
A: The notification is from your phone, especially some Android phone instead of our APP. That is because the WIFI of the device does have no access to the Internet. You can tap Connect to proceed. Please do not choose “Cancel’.
Q6: How can I share the llght control with family members?
A: Step 1: Tap the Home you create at home page, select ‘Home Management” enter home share page, Tap the home you want to share. Step 2: Select ‘lnv1te .. .’ at the settings page.Step 3: At Invite’ page. fill In the name and E-mail of the Invitee you went to add. The ‘Name’ here works as a note, not necessarily to be the same as that used in the APP.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation Is subject to the following two conditions: {1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, If not Installed and used In accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful Interference to radio or televlslon reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

To maintain compliance with FcC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.