MEARI Speed 9S Home Security Camera For Baby Monitor User Guide
- June 6, 2024
- MEARI
Table of Contents
Speed 9S
ORIGINALITY DESIGN SMART AND BEAUTIFUL
QUICK GUIDE
What’s in the box
Please consult this checklist for all parts.
Description
| Power | DC 5V±10% |
|---|---|
| Status light | • Red light solids on: the camera network is abnormal |
• Blinking red light: awaiting WiFi connection (faster blinking)
• Blue light solids on: camera running correctly
• Blinking blue light: currently connecting (faster blinking)
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds with a pin to reset the camera (if you
have modified settings, they will return to factory defaults)
Call| Receive the answer after pressing the button
INSTALL
- Use the included mounting bracket to fix the camera to a clean surface.
- Or, put the camera on a flat surface.
Connect
Download
Smart Life is available for both iOS and Android OS. Research the name ‘Smart
Life’s App Store or Android Market, or scan the QR-Code to download the App.
Support
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is
connected to the WiFi network. Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your WiFi.
Registration process
Step 1 Open the Smart Life App, click “Register”, read the “Privacy Policy”
and click “Agree”.
Step 2 Input a legal and valid Mobile number or Email address and click “Continue”. Input Verification Code, then log in to the app.
QR Code Configuration
- Open the Smart Life App, click *Create family’, and you can customize the Family name and related settings.
- Continue to click ‘Security & Sensor’ >> > ‘Smart Camere.and then choose-Add Device or ” +”, featly to add camera.
- In Add Device this interface. continue to click ‘next step.and then you should input your WiFi’s passwords.
Note:
- Camera only supports a 2.4GHz WiFi network.
- The number of bits in the SSID and passwords of the router should not exceed 24 digits.
-
In this interface, you should scan the QR code in your phone with the camera, when the camera comes out “dong dong dong”. And you can complete the configuration in about 30s.
Scan with the camera
When you 13p CONTINUE, the mobile phone displays an OR COO. HOl0 the Camera 15 to 20 cm in front of the mobile phone for the Camera to scan the OR code. -
When connecting, you should make sure your router, mobile, and camera are as close as possible. When the camera is added successfully, click ” ”you could also DIY the camera’s name.
Settings
In “Smart Camera” interface,click “ “,you can set the camera common functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App. Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after a power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Function
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360
degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you to push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud
storage.
One-Touch Cal l
Hear your baby’s call anytime, anywhere.
Daytime & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
FCC Statement This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>