Meari MINI8 IP wifi CAMERA User Guide
- June 5, 2024
- MEARI
Table of Contents
Meari MINI8 IP wifi CAMERA
What’s in the box
Please consult this checklist for all parts
Description
Install
- Stick the adhesive tape in the middle of camera’s bottom
- Put the camera on the clean plane
Connect
Download
Smart Life is available for both iOS and Android OS. Rearch the name Smart
Lite in App Store or AndroId Market, or scan upper QR-Code to download the
App. 
Set up router
The device only supports a 2.4GHZ frequency band router, and does not support
bGHz frequency band router, please set the relevant parameters of the router
before WiFi configuration, Wii passwords do not include special characters
Such as-@#S &). When the device is contigured in WiFI, the mobile phone and
device are as close as to the router, which can speed up the contiguration of
the device. 
Registration process
Step 1 Open the Smart Life App, click ‘Register, read the “Privacy
Policy” and click “Agree 
Step 2 input a legal and valid Mobile number or Email address and click
Continue”. Input the Verification Code, then log in the app.
QR Code Configuration
Getting started
- Please follow the instructions and make sure the passwords are input Correctly.
- One device can only be added with one App account, if the device has been added with another account already, then it can’t be added to any other account again.
- The device will be unbound from the previous account after being deleted from App. Further,the device will be reset automatically once from blue light to red light.
Process
Step 1 Open the Smart Life App, click “+” or “Add Device”. Then select
“All on the “Select Device Type” page. 
Step 2 Select “Security Camera”. Power the device on and make sure the
indicator is flashing quickly or a prompt tone is heard. 
Step 3 Input WiFi passwords and click “Confirm”, scan the QR Code with a
device. (You can change the network connection) 
Step 4 Click “I heard the beep” when the device comes out “dong dong
dong’. And you can complete the configuration about 30s. 
Step 5 The device is added, and the device nickname can also be changed in
this interface. 
FAQ
Q: The device cannot be previewed properly
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to Cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAl32. And the Ih card can
be identified when the internet environment is not good.
Q: Why do I can get notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
Confirmation in the mobile phone system have been opened.
Functions
Video flip
Flip your video stream vertically anytime for maximum flexibility
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high-capacity SD card storage.
Day & Night
Powerful night vision means no interruptions, even in complete darkness
.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. End-users and
installers must
be provided with antenna installation instructions and consider removing the
no collocation statement This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.