MEARI Mini 14S 1080P WiFi Indoor Camera User Guide
- June 5, 2024
- MEARI
Table of Contents
MEARI Mini 14S 1080P WiFi Indoor Camera
What’s in the box
Consult the checklist below for all components. 
Description
Install
- Stick the adhesive tape in the middle of camera bottom
- Put the camera on the clean plane
Connect
Download
SmartLife is available for both iOS and Android OS. Search the name ‘Smart
Life, in App Store or Google Play, or scan the QR-Code to download the App.
Support
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi.
Connect
Registration process
Step 1 Open the Smart Life App, click “Register”, read the “Privacy
Policy” and click “Agree” 
Step 2 Input a legal and valid Mobile number or Email address and click
“Continue”. Input Verification Code, then log in the app. 
QR Code Configuration
- Open the Smart Life App, click “Create family”, and you can customize the Family name and related settings.
- Continue to click “Security & Sensor” >> “Smart Camera”,and then choose’Add Device” or “+”,ready to add camera.
- In “Add Device” this interface,continue to click “next step”,and then you should input your WIFi’s passwords.
Note
- Camera only supports 2.4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits.
- In this interface,you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
- When connecting.you should make sure your router, mobile,and camera are as close as possible.When camera added successfully,click “2” you could also DIY the camera’s name.
Settings
In “Smart Camera” interface,click “2”you can set the camera common functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add again. it
Q:Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q:Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.
Q:WhyI can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system have been opened.
Functions
-
Video flip
Flip your video stream up or down for maximum flexibility. -
Motion detection
Built-in motion sensors detect movement, and the camera will send you push notifications and app alerts. -
Record
Support 24H continuous recording with high capacity SD storage. -
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision technology.
FCC Statement：
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>