Meari BABY2M Baby Camera Wifi User Manual

Meari BABY2M Baby Camera Wifi

Specifications

• Product Name: Baby 4S& 2M
• Lens & FOV (H/V/D): Not specified
• Working Temperature: Not specified
• Local Storage: TF card slot (Max. 128G)
• Resolution: Not specified
• Size: Not specified
• Power Input: DC 5V/1A
• Consumption: Not specified
• Supported Phone OS: Not specified
• Wi-Fi: 2.4GHz Wi-Fi, Wi-Fi HaLow

Product Information

The Baby 4S& 2M is a smart and beautifully designed monitoring system that includes various features such as temperature and humidity sensors, night light, speaker, status light, and more.

Product Usage Instructions

• Description
  The device includes features like temperature and humidity sensors, night light, speaker, status light, power on/off, microphone, TF card slot, and more.

• Power On/Off
  To turn on or off the device, long-press the power button.

• Night Light
  You can control the night light by pressing the corresponding button.

• Reset
  In case you need to reset the camera, press and hold the reset button for 5 seconds.

• Description (Monitor)
  The monitor features volume control, antenna for better signal reception, TF card slot, speaker, stand, and various controls.

• Volume On/Off
  To control the volume, use the volume button on the monitor.

• Antenna
  Adjust the antenna to improve signal reception.

• Menu
  You can access different functions by pressing the menu button.

Installation

• Method 1: Clamp the camera to the edge of the bed and adjust the viewing angle. Press to clamp and twist to adjust.
• Method 2: Use the included mounting bracket to fix the camera on a clean surface. Install screws according to the template and snap the camera into place.

Frequently Asked Questions (FAQ)

How do I connect the camera to the App?
The camera can be connected to both the monitor and the App. Ensure your Wi-Fi network is a 2.4 GHz network and follow the instructions in the manual for connecting to the App.

Baby 4S &2M
ORIGINALITY DESIGN SMART – AND BEAUTIFUL

QUICK GUIDE

What’s in the box

Please consult this checklist for all parts.

Description

• Power port DC 5V/1A

• TF card slot Support local TF Card storage (Max.128G)

• Microphone Capture sound for your video

• Status light

  • Blinking red light: wait for network connection (slow) connecting the network (fast)
  • Solid blue light on: camera is working correctly
  • Solid red light on: camera is malfunctional

• Temperature and humidity sensor
  Detect the temperature and humidity of the environment

• Call/Pair Press to make a call; long press to pair

• RESET Press and hold for 5 seconds to reset the camera (if you have modified settings, they will return to factory defaults)

• Power ON/OFF Long press to turn on or turn off power

• Night light ON/OFF Press to turn on or turn off night light

• Status light of charging

  • Orange light: Charging
  • Green light: Fully charged

• Power port DC 5V/1A
• Status light
  • Orange: Working
  • Black: Sleep or power off
• Microphone Capture sound for your video
• Antenna Adjust the angle to get better signals
• ON/OFF button Long press 5 seconds to turn on and turn off the monitor Switch cameras (dual screen)；
• Zoom in/out Zoom the image in 1X, 2X or 4X (single screen)
• Menu
  • On homepage, press to enter the menu interface;
  • On homepage, long press to enter the setting interface
• Direction Control the rotation directions; select the menu items
• OK Comfirm or awake the screen
• Call Make a call after pressing the button
• TF card slot Support local TF Card storage (Max.128G)
• RESET Press with pin to reset the monitor
• Back
  • Press to back up;
  • On homepage, long press to stop playing music

Installation

1. Method 1：
   Clamp the camera to the edge of the bed and twist the body to find an ideal viewing angle.

2. Method 2：
   Use the included mounting bracket to fix the camera to a clean surface .

3. Install the screws to the wall according to the position of the drill template. Do not tighten the screws to the end, as you need to leave a gap for hanging the camera.

4. Snap the camera mounting holes (at the bottom) into the screws and push the camera downwards until it stuck.

Specification

Connection

Connect the camera to the App
The camera can be connected to both the monitor and the App. Generally, it is connected to the monitor by default.
Follow the steps below to connect the camera to the App:

1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn’t support 5 GHz Wi-Fi.

2. Download the corresponding App on your phone. Register a new account to log in or use an existing account to log in directly.

3. Reset the camera until the status light is red in fast blinking. (You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.)
   (If you are using the monitor, the audio and video will be temporarily disconnected, and will automatically resume after the camera is successfully configured with the network. The maximum time is 2 minutes.）

4. Follow the step instructions on your smart phone to add the monitor, and scan the QR code with your camera.

App Download
The App is available for both iOS and Android OS. Scan the QR code or search “CloudEdge” at App Store and Google Play. Download and install the App at your phone. You can select the App according to needs.

Support

Set up router
The router supports the 2.4GHz Wi-Fi (doesn’t support the 5GHz), and is connected to the Wi-Fi network. Please set the parameters of the router before connecting the Wi-Fi network, and record the SSID and password of your Wi-Fi .

Pairing of camera and monitor
Power on the camera and the monitor, and they will automatically connect. If the connection fails, please follow the steps below to pair. The pairing is distance limited, so make the distance between the camera and the monitor is no more than 200m.

• Unbind the monitor and camera:
  • Press Menu button on the monitor screen, and select Camera.
  • Select Camera 1 or Camera 2 which you need to unbind.
  • Long press OK button to release the binding.
• Pair the monitor and camera:
  • Press Menu button on the monitor screen, and select  Camera
  • Select Camera 1 or Camera 2 which you need to pair.
  • Long press the camera pair button until you hear the prompt tone.
  • Press OK button on the monitor screen to start pairing.
  • (Optional) For 2 cameras, repeat step 2 ~ step 4.

Usage

Note ：

• • For different products, you may add 1 or 2 cameras. If you have added 2 cameras, the monitor screen will display 2 live views at the same time.
• • If you want to set parameters or enable functions of one of the cameras, you need to select the camera first.

Camera selection method (2 cameras)

• On home page, press button to switch camera between Cam1 and Cam2 if you have added two cameras.
• If you have added two cameras, select one camera you need and press OK button on monitor to enter full screen viewing mode. And then you can press button again to zoom in and zoom out. ( button does not work when the screen is not in full screen.)

Play music
You can play music to sooth your baby when baby is crying or sleeping. There are various soft music to select. Press Menu on monitor , select and press OK to enter. You can select different music, change music cycle mode, and adjust the music volume.

Photo & video

• Take a photo:
  You can take a photo when you want to capture an interesting scene of baby. Press Menu button on monitor, select and press OK to take a photo.

• Record a video:

  • You can record a video when you want to capture a meaningful time of baby.
  • Press Menu button on the monitor screen, select and press OK to record

• View the taken photos and recorded videos:

  • Press Menu button on the monitor screen, select and press OK to enter the interface.
  • Select the camera and date, select the photo or video you want to view, and press OK to enter preview mode.

• For a video, press OK to play or pause in the preview mode.

• Press backup button to quit preview or return to main menu.

Feeding reminder
Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet.

1. Press Menu button on the monitor screen, and select > Feeding Reminder.
2. Select on or off to open or close feeding reminders. You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the monitor screen.
3. Press UP and DOWN direction buttons to select between 4 time options, and press OK to start the time setting.

Safety Protection

• Wi-Fi network channel
  If you turn off the Wi-Fi network channel, the App will not be able to view the camera.

• Visited records
  You can also view the visited records as all visits through the App will be recorded.

Night light

• You can turn on night light if needed, and you can set lighting mode and light color.
• Press Menu button on the monitor screen, and select >  .
• Or press Menu button, and select > Camera Light > Night light.

Temperature and humidity detection
You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures.

1. Press Menu button on the monitor screen, and select > Temperature and humidity.
2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to start setting.
3. Press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to change values and units.
4. In Out of range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range.

Smart care
You can turn on functions of motion detection, noise detection and cry detection, so that you can know the baby status immediately, no matter you are sleeping, working, cooking and so on.

1. Press Menu button on the monitor screen, and select > Smart Care.
2. Select Alarm Type, press UP and DOWN direction buttons to select options between Motion Detection or Noise Detection and press OK to save.
3. When start to set up one detection mode, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to adjust sensitivity.

• You can select different sensitivity according to needs. Low is low sensitivity, and high is high sensitivity. 4. Select Reminder Method, press UP and DOWN direction buttons to select reminder methods (icon, voice). To adjust the alarm volume, you can press LEFT and RIGHT direction buttons.

General setting

• Set up brightness:
  Press Menu button on the monitor screen, select and press UP and DOWN direction buttons to adjust brightness.

• Set up time:

  • Press Menu button on the monitor screen, and select > Date and Time.
  • Press direction buttons to change date, time and time displaying mode.

• Set up language:

  • Press Menu button on the monitor screen, and select > Language.
  • Select the language you need.

• Set up sleep mode:
  You can set up sleep mode to increase standby time.

  • Press Menu button on the monitor screen, and select > Sleep mode.
  • The default mode is Audio off, which means that the audio from the camera can not be heard after the display is off and the standby time is long.
    In Audio on mode, the audio from camera can still be heard even after the screen is turned off, and you can choose the time(1,5,10,30 or 60min), but the standby time is shorter. In Always on mode, the monitor remains on unless the power button is pressed, short standby time.

• Turn on/off status indicator:

  • If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator, if you think it will affect your baby’s sleep.
  • Press Menu button on the monitor screen, and select > . (Or Press Menu button，select > Light > Status light.)

• Micro SD card:

  • Press Menu button on the monitor screen, and select > Micro SD card . Then you can get the information about the total and remaining capacity of the Micro SD card.
  • (Optional) You can format the Micro SD card if you needed, but make sure that the important data is backed up.

• Low battery alarm:
  When the camera is low on battery, the low battery alarm will appear on the monitor screen. Please charge the monitor as soon as possible.

• Upgrade:
  You can upgrade your camera when the upgrade alarm appears. Or press Menu on the monitor and select > Device information to check whether there is an upgrade.

FAQ

FAQ-Camera

• How to disable the LED indicator/blue light with my camera?
  CloudEdge App >> Device (tap device to live video page) >> Settings >> Network Indicator: Disable it.

• How to turn off the camera real-time monitor, and stop recording?
  CloudEdge App >> Device (tap device to live video page) >> Settings >> Basic Function >> Privacy Protection >> Lens OFF.

• How to change the Wi-Fi or update the Wi-Fi password for the device?
  Please delete the camera on App, tap “Add” and follow the steps to use the new Wi-Fi network to add the camera again.

• How to share devices with friends and family?
  CloudEdge App >> Device (Tap device to live video page) >> Settings >> Device Share >> Add, follow the guide to share your device.

• Failed to access the Live video, prompts offline?

  • Please ensure the camera is in the power-on state: the camera network indicator will be on.
  • Check the Wi-Fi network is in good condition and restart the router.
  • Try to move the camera near the router, and check again.
  • Delete the camera from CloudEdge App and add it again. Confirm the App and camera firmware are the latest versions.

• Why I can’t get the notifications with my cell phone App when I connect the camera to the monitor?
  Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.

• Q: The monitor cannot be previewed properly?
  A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly.

• Q: Cannot find the pairing button?
  A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the monitor. (To enter the pairing interface of the monitor, press Menu button on the monitor screen, and select > Camera Management.)

• Q: What if the monitor screen is stuck and it doesn’t work while pressing any buttons?
  A: Press the reset button of your monitor with the pin, and then long press the power button of your monitor to restart it.

• Q: Why the camera or the monitor cannot identify the TF card?
  A: Confirm whether the TF card is normally available and the format is FAT32.

• Q: Why the monitor can’t view video after the camera is connected to the App?
  A: The monitor has a 2 minute interruption time when the camera is reset, and it will automatically resume after 2 minutes. If it doesn’t recover, try to pair the monitor and camera again.

Functions

• Video flip
  Flip your video stream up or down for maximum flexibility.

• Motion detection
  The camera can detect movement, and then the camera will send you push notifications and app alerts.

• Crying detection
  The camera can detect the crying of your baby, and the camera will send you push notifications and app alerts.

• Temperature & humidity detection
  The camera can detect the temperature and humidity of the environment, and the camera will send you push notifications and app alerts.

• Record
  Support 24H continuous recording with high capacity SD storage or Cloud storage.

• Day & Night
  Never miss a moment, even in complete darkness, with powerful night-vision technology.

Legal Notice

• Symbols: Direct current (DC)
• Don’t throw batteries or out of order products with household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collection of garbage proposed by your city.

FCC

FCC Statement

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Safety Information

Power Adapter Safety：

1. The power plug is intended to serve as a disconnect device. Do not drop or cause an impact to the power adapter.
2. If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.
3. Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.

Child’s safety

1. Comply with all precautions with regard to child’s safety. Letting children play with the device or its accessories may be dangerous.
2. The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.

Operation safety

1. Use the device under allowed humidity and temperature conditions.
2. Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it, to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering.
3. Observe local laws and regulations, and respect the privacy and legal rights of others.

Industry Canada (ISED) Compliance Statement
This device complies with Industry Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed a nd operated with a minimum distance of 20 centimeters between the radiator and your body.

Battery Safety

1. Your device contains a rechargeable lithium-ion battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery in your device
2. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard.
3. Do not use a battery if its case appears damaged, swollen, or compromised. Examples include, but are not limited to, leaking, odors, dents, corrosion, rust, cracks, swelling, melting, and scratches.
4. Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local ordinances or regulations.

© 2024. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>