MEARI Bell 11S IP Camera Video User Manual
- June 5, 2024
- MEARI
Table of Contents
MEARI Bell 11S IP Camera Video
What’s in the Box
NOTE:
The “+” on the battery and the battery compartment should keep the same
direction
Description
Doorbell button Press the button to activate the doorbell
Status light
- Red light solids on: the device or network is abnormal
- Red light blinking: awaiting WiFi connection
- Blue light blinking: device is connecting with WiFi
- Blue light solids on: camera running normally
- Mic Captures sound for your video
- SD card slot Supports SD Card storage (Max. 128G)
- ResetPress and hold on for 5 seconds to reset the device
Install
Installation Method
- Mark screws position
- IX the expansion screws
- install back cover on the wall With screw ‘A’
- After puting the batteries and SD card if required)in the slot, fix the back cover along the direction line
- Fix the bracket and tight the C Screw
Connect
Download
CloudEdge is available for both iOS and Android OS. Search the name
CloudEdge’in App Store download the App. Go le Play, or scan the QR code to
support.
Add device
Log in the CloudEdge, select “Add Device”‘, and add the smart doorbell to the
App according to the screen tips(Make the smart doorbell close to the router
when configuring).
NOTE: If you need to re-select the WIFi network, please press and hold the “RESET button for 5 seconds, the device will restart, and the indicator will be flashing red.
Functions
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Low battery alarmn
You can set a low-battery alarm threshold in your phone App. The threshold can
set as a minimum of 10% and a maximum of 50%. When the battery power of the
camera is lower than the set threshold, the App will send a reminder.
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Notes
The instalation height of doorbell shall be 1.4m from the ground Doorbell
shall be installed on non-metallic materials in case of singal mask Router
shall keep as close to the door as possible for better WiFi signal
Connect
Download
Smart Life is available for both iOS and Android OS. Search the name ‘Smart
Llie in App Store or Google Play, or scan the QR-Code to download the App
Support
Add device
Log in the Smart Life, select “Add Device”, and add the smart doorbell to the
APP according to the screen tips(Make the smart doorbell close to the router
when contiguring).
NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
Functions
Full-duplex audio
YOu can see and hear the vistor in your App from the camera.
One press notification
When a visitor press the doorbell button, you will receive a notification on
your phone instantly
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold can
set as a minimum of 10% and a maximum of 50%. When the battery power of the
camera is lower than the set threshold, the App ill send a reminder.
Record
Using SD card to keep audio recording for every moment.
SRD
Doorbell supports jingle function, when someone press doorbell button, the
jingle will ring.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator& vour bodv.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply withthe limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not Ocur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>