Hangzhou Meari BELL11S Wireless Doorbell User Guide
- June 5, 2024
- Hangzhou Meari
Table of Contents
Bell 11S
ORIGINALITY DESIGN SMART – AND BEAUTIFUL
QUICK GUIDE
what’s in the box
NOTE: The” +” Es on the battery and the battery compartment should keep the same direction
Description
Doorbell button Press the button to activate the doorbell
Status light
- Red light solids on the device or network are abnormal
- Red light blinking: awaiting WiFi connection
- Blue light blinking: device is connecting with WiFi
- Blue light solids on camera running normally
Mic
Captures sound for your video
SD card slot
Supports SD Card storage (Max.128G)
Reset
Press and hold on for 5 seconds to reset the device
Install
Installation Method
|
---|---
1. Mark screws position| 2. Fix the expansion screws
|
3. Install back cover on the wall with screw ‘A’| 4. After putting the batteries and SD card (if required)in the slot, fix the back cover along the direction line
| 5. Fix the bracket and tighten the ‘C’ screw
Connect
Download
CloudEdge is available for both iOS and Android OS. Search the name
‘CloudEdge’in App Store or Google Play, or scan the OR code to download the
App.
- Support
Add device
Log in to the CloudEdge, select ‘Add Device’, and add the smart doorbell to
the App according to the screen tips(Make the smart doorbell close to the
router when configuring). NOTE: If you need to re-select the WiFi network,
please press and hold the ‘RESET’ button for 5 seconds, the device will
restart, and the indicator will be flashing red.
Functions
Full-duplex audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by. it sends an alarm message to your
cell phone.
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold can
be set as a minimum of 10% and a maximum of 50%. When the battery power of the
camera is lower than the set threshold, the App will send a reminder.
Record
Use an SD card or Open the Cloud-Storage Service, to keep recording every
moment.
Day & Night Powerful night vision means no interruptions, even in
complete darkness.
Bell 11A
ORIGINALITY DESIGN SMART – AND BEAUTIFUL
QUICK GUIDE
what’s in the box
NOTE:
The “+” on the battery and the battery compartment should keep the same
direction
Description
Doorbell button Press the button to activate the doorbell
Status light
- Red light solids on the device or network are abnormal
- Red light blinking: awaiting WiFi connection
- Blue light blinking: device is connecting with WiFi
- Blue light solids on the camera running normally
Mic
Capture a sound for your audio
SD card slot
Supports SD Card storage (Max.128G)
Reset
Press and hold on for 5 seconds to reset the device
Install
Installation Method
|
---|---
1. Mark screws position| 2. Fix the expansion screws
|
3. Install the back cover on the wall with screw ‘A’| 4. After putting the batteries and SD card (if required)in the slot, fix the back cover along the direction line
| 5. Fix the bracket and tighten the ‘C’ screw
Notes
- The installation height of the doorbell shall be 1.4m from the ground
- The doorbell shall be installed on non-metallic materials in case of singe! mask
- The router shall keep as close to the door as possible for a better WiFi signal
Connect
Download
Smart Life is available for both OS and Android OS. Search the name ‘Smart
Life in App Store or Google Play, or scan the QR-Code to download the App.
- Support
Add device
Log in to the Smart Life, select ‘Add Device”, and add the smart doorbell to
the APP according to the screen tips(Make the smart doorbell close to the
router when configuring). NOTE : If you need to re-select the WiFi
network, please press and hold the ‘RESET” button for 5 seconds, the device
will restart, and the indicator will be flashing red.
Functions
Full-duplex audio
You can see and hear the visitor in your App from the camera.
One press notification
When a visitor presses the doorbell button, you will receive a notification
on your phone instantly
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold can
be set as a minimum of 10% and a maximum of 50%. When the battery power of the
camera is lower than the set threshold. the App will send a reminder.
Record
Using SD card to keep audio recording for every moment.
SEND
The doorbell supports a jingle function, when someone presses the doorbell
button, the jingle will ring.
FCC Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator& your body.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.