MEARI BELL1S Wireless Doorbell User Manual
- June 5, 2024
- MEARI
Table of Contents
MEARI BELL1S Wireless Doorbell
What’s in the box
Please consult this checklist for all parts.
Description
-
Power Port
AC12-24V -
Doorbell button
Press the button to activate the doorbell -
Status light
Red light solids on: the camera network is abnormal
Red light blinking: awaiting WiFi connection, or currently connecting (faster blinking)
Blue light solids on: camera running correctly -
Microphone
Captures sound for your video -
SD card slot
Supports local SD Card storage (Max.128G) -
Reset1
Press and hold on for 5 seconds with pin to reset the
doorbell
-
Mini UsB
DC5V 10%,USB power supply -
Charging indicator
Red indicator solids on: battery is charging
Blue indicator solids on: charging completed -
Reset 2
Tap reset button for 5 seconds to factory reset -
Bayonet lock
Lock the battery box through bayonet lock -
Battery capacity
6700mAh (Two 18650 lithium-ion batteries)
Install
Battery Power supply mode
AC Power supply mode
Double-sided tape mode
Connect
Download
Smart Life is available for both iOS and Android OS. Rearch the name ‘Smart Life’in App Store or Android Market, or scan the QR-Code to download the App.
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is
Connected to the WiFi network.Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your
WiFi.
Registration process
- Open the Smart Life App, click “Register”, read the “Privacy Policy” and click “Agree
- Input a legal and valid Mobile number or Email address and click “Continue”. Input Verification Code, then log in the app.
QR Code Contiguration
-
Open the Smart Life App, click “Create family”, and you can customize the Family name and related settings.
-
Continue to click “Security & Sensor” >> “Smart Camera”,and then choose”Add Device” or “+”,ready to add camera.
-
In “Add Device” this interface, continue to click “next step”,and then you should input your WiFi’s passwords.
Note: -
The camera only supports a 2.4GHz WiFi network.
-
The number of bits in the ssid and passwords of the router should not exceed 24 digits.
-
The bell management after the doorbell detects the button event, it sends the visitor button message to the indoor bell device through 915MHz frequency, and the bell device will ring automatically after receiving the message. This event can be triggered multiple times. Bell devices offer several different ring tones to choose from. Factory use default ring tone, support user Settings
-
In this interface,you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
-
When connecting, you should make sure your router, mobile, and camera are as close as possible. When the camera is added successfully. click “2” you could also DIY the camera’s name.
Settings
In “Smart Camera” interface,click “2”.you can set the camera common functions.
Unlock
- Step 1 Click “..” enter the “Setting” page and click “Basic Feature Settings”.
- Step 2 Enter the “Basic Feature Settings” setting page and click “Unlock the Battery” to unlock it automatically. When the motor is finished, the battery box can be pulled out.
Functions
Full-duplex audio
When the visitor push the doorbell button, you will get a call. You can see
and hear the vistor in your App from the doorbell if you answer.
PIR
When the doorbell detects someone stopping by, it sends an alarm message to
your cell phone.
Shared device
The doorbell device can be shared with friends, and friends can also preview
online. There is no limit to the number of sharing devices, but only 6
accounts are supported for online preview at the same time.
Record
Record every moment by using high capacity SD card storage.
Day & Night
Powerful night vision means no interruptions, even in complete
darkness.
FAQ
-
Q In the network process, the process bar is always not 100%, add failure?
A: This camera only supports a 2.4GHz WiFi router, please make sure you are using a 2.4GHz VWIFi router.And confirm the WiFi password again. -
Q: Repeated additions are failures?
A: After adding a failure, it is recommended to restart the device or powe off, and then try to add again. -
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and ado it again. -
Q How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App. -
Q: why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened. -
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after a power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1 This device may not cause harmful
interference, and (2) This device must accept any interference received,
including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>