globe GE50454 Smart Garden Spotlight Instruction Manual

Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment.
SMART OUTDOOR SPOTLIGHT
Check out the installation video on our website: globe-electric.com/smart
SAVE THESE INSTRUCTIONS

CAUTION IMPORTANT SAFETY INSTRUCTIONS
CAUTION: This device is warranted to last 2 years from the date of purchase. If it fails before that time, we will replace it. Send Globe Electric the device, proof of purchase, and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.
For use only in 120V/60HZ circuits. Risk of electrical shock. Do not open, no user-serviceable parts inside. This device is not intended for use with emergency exit fixtures or emergency exit lights, photocells, and electronic timers. The minimum operating temperature is -20°C (-4°F).
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS: When using electrical products, basic precautions should always be practiced including the following:

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

2. Read and follow all instructions that are on the product or provided with the product.

3. For a direct plug-in power unit, do not use an extension cord.

4. Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and clearances from power and lightning conductors.

5. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

6. For a direct plug-in power unit, do not install or use within 10 feet of a pool.

7. For a direct plug-in unit, do not use it in a bathroom.

8. For a direct plug-in power unit marked in accordance with the following:
   WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected receptacle that is weatherproof with the power unit
   connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not
   interfere with completely closing the receptacle cover.

9. WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician.

10. For a unit intended to be mounted greater than 0.30m (1 foot) from the ground surface.

WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
For direct plug-in units, in accordance with fully engaging into a standard receptacle that is weatherproof only when the receptacle is covered (attachment plug cap not inserted and receptacle cover closed). With reference to the instruction “WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician”, there shall be no literature, carton markings, or illustrations depicting or implying running wiring through a building structure.
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
FCC RESPONSIBLE PARTY
Globe Electric
2264 East 6th Street
San Bernardino, CA 92410
www.globe-electric.com

Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to offer us your valuable feedback, you may contact us in the following ways: Toll-Free Telephone: 1-888-543-1388 (North America Only) / Toll-Free Fax: 1-800-668-4562 (North America Only)
E-mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department
150 Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products: http://www .globe-electric.com

FEATURES

• Indoor and outdoor use
• Dimmable: 1% – 100%
• Color Changing: a full spectrum of RGB colors
• Automate controls by setting schedules
• Pair with a virtual assistant to control the device with your voice

SPECIFICATIONS

PRE-INSTALLATION

Planning Installation
Compare all parts with the “Hardware Included” section. If any part appears missing or damaged, do not install this product and contact the Customer service team at 1-888-543-1388 or e-mail info@globe-electric.com.

No Tools Required

Hardware Included
NOTE: Hardware is not shown to actual size.

MOUNTING INSTRUCTIONS

Step 1
Connect the controller and the outdoor cable to the power adapter.

Step 2
If the Lights are going to be used in the garden, connect the ground spike to the LED head using the included Allen Key.
Screw the LED head to the top part of the ground spike.

*The LED head can be mounted onto a preferred location, such as a deck, without the use of the ground spike. To do so, remove the swivel base from the LED head using the Included Allen key, attach the base in the desired location and reattach the LED head.

Step 3
Connect each of the LED lights to one of the ends of the outdoor cable. Please make sure to properly align both ends of the cables for a proper connection and then tighten the seal.

Step 4
Connect the power adapter to an outlet. Follow the “Connecting Instructions” (next page).

Step 5
Place the outdoor lights in your preferred location and enjoy!

CONNECTING INSTRUCTIONS

Make sure your mobile device is running iOS 9.0/watchOS 2.0/Android™ 4.4 or higher.

1. Let’s get started! • Download the Globe Suite™ app from the App Store or Google Play to your mobile device
   • Launch the Globe Suite™ app
   • To register, enter your email address, create a password, then log in to the app
   OR
   • Log in if you already have an account

2. Verify your network • Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
   • Consult your router documentation for detailed instructions on how to change wireless settings

3. Scan mode
   • Power on your device
   • Select the “+” symbol on the top right-hand corner
   • Follow instructions within the app
   • If your device is flashing rapidly and fails, try using EZ Mode
   EZ mode
   • Select the “+” symbol on the top right-hand corner
   • Select “Manual”
   • Select your product type and follow the instructions within the app
   • If the connection fails, try using AP mode
   AP mode
   • Select the “+” symbol on the top right-hand corner
   • Select “Manual”
   • Select your product type
   • Open the menu on the top right-hand corner and select “AP mode”
   • Follow the instructions within the app

4. Set up voice assistance
   • Select “Profile,” and select “Integration”
   • Select your voice assistant and follow the instructions within the app

Did you know?
Most modern routers are dual-band, meaning they support both 2.4 GHz and 5 GHz channels.
The most common wireless options are:

• Mixed: The router will broadcast both 2.4 GHz and 5 GHz simultaneously under the same SSID. The device will choose which to connect to based on multiple variables (congestion, distance to the router, etc.).
• 2.4 GHz: Broadcast only on this channel
• 5 GHz: Broadcast only on this channel
• Dual 2.4 and 5 GHz using Separate SSIDS: The router will broadcast both channels and the user manually decides which to connect to

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>