globe MR16 Smart LED Bulb User Manual
- October 30, 2023
- globe
Table of Contents
globe MR16 Smart LED Bulb
Product Information:
The device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Product Usage Instructions:
When using the device, ensure that it is operated in compliance with the above-mentioned conditions:
-
Avoid using the device in a way that may cause interference with other devices or systems.
-
If interference occurs, stop using the device immediately.
-
If the device is causing interference, try to correct the
interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a different circuit than the one used by the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
By following the above instructions, you can ensure safe and proper usage of the device without causing any interference to other devices or systems.
FEATURES
- LED integrated – dimmable through the app
- RB: Choose from a full spectrum of colours
- Tunable white (2000 K – 5000 K):
Choose from a focused bright white to a relaxed sunset glow Set schedules and control your light from anywhere
SPECIFICATIONS
- 400 lumens (at 5000 K)
- 2000-5000 K
- RGB
- 5.5 watts
- GU10 base
- Energy star
- Lasts 15.000 hours
- Indoor use only
- 120 V • 60 HZ
CONNECTING INSTRUCTIONS
-
Download the Globe Suite™ app Make sure your mobile device is running ios 9.0/watchOS 2.0/Android™M 4.4 or higher.
- Download the Globe Suite app from the iOS or Aneroid score.
- Use vour email to create an account and log in.
-
Set your smart bulb in pairing mode Once the smart bulo is screwed in correct and is powered on, the light should be flashing rapidly, indicating it is in pairing mode
• If it is not, turn the power switch controlling the light “Off / On / Off / On / Off / On.” -
Connect to the Globe Suite™ app On your mobile device, please ensure all requested permissions are enabled:
Wi-Fi, Bluetooth, Location Services.- Select the “+” icon in the top right of the Globe Suite™ app home screen.
- If the light is flashing rapidly, the “scan” mode will detect your bulb within a few seconds. When discovered, select the bulb icon, and tap on “Next.”
- Enter your Wi-Fi credentials correctly.
-
Your smart bulb is ready!
- Name your device and choose which room to place
- You can now control your smart bulb directly from the Globe Suite™ app.
- Still need help? Select the “How do I set device into pairing mode” link on the “scan” page and follow the in-app instructions or view the video.
- You can also scan the OR code for a short instructional video (see page 1).
-
Set up voice assistance
- On the home screen, select “Profile,” and select “Integration.” Choose your voice assistant and follow the instructions within the ape
- Create Siri Shortcuts (for iOS)
- On the home screen, select smart scenes, then select the “+” icon to add a Trigger Scene.
- Once completed, select “Add to Siri” and add the phrase to sir shortcuts.
- Please note that the exact phrase must be said to execute the Trigger scene with Siri.
CONTROLLING THE SMART BULB THROUGH THE APP
Please note that the device UI panel is subject to change without any prior notice.
HARDWARE SETTINGS
Power on behavior
Determine how your light behaves when reconnected to a power source.
ROUTINES
Timer
Set a countdown for your light to turn on or off once the timer runs.
Wake up
Set you light to gradually fade in to help you wake UD
Bedtime
Set you light to gradually fade out to off to help you sleep.
Vacation
Schedule your device to automatically turn on and oft to give the appearance
someone is home whle vou are away.
Add a new schedule
Set a time and date for your bulb to either turn on or off to create
additional routines that fit your specific needs.
BASIC CONTROL
Tunable white
2000K 5000K adjustable color temperature
RGB
16+ million colours
Mood
Preset colour combinations
Dimmable
Adjustable brightness level through the app
APP FEATURES
Device offline notification
Select to receive a notification if your device goes offline.
Device sharing
Share access to your connected device with another Globe Suite* app user.
Device grouping
Group multiple Globe bulbs together to control them in unison, rather than
individually.
Add to home screen
Create a widget on your phone and/or tablet’s home screen for easy access to
the device.
Scan the QR code for a more in-depth look of how the features work.
LIMITED WARRANTY
This bulb is warranted to last 3 years from the date of purchase based on use of 3 hours per day. If it fails before that time, we will replace it. Send Globe Electric the bulb, proof of purchase and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.
CAUTION: DO NOT USE WITH STANDARD DIMMER. Only use the control provided
with or specified by these instructions to control this lamp. This lamp will
not operate properly when connected to a standard (incandescent) dimmer or
dimming control. The bulb can be switched to different operating modes and is
dimmable through the Globe Suite™ app. For use only in 120V/60HZ circuits.
Risk of electrical shock. Do not open, no user-serviceable parts inside. This
device is not intended for use with emergency exit fixtures or emergency exit
lights, photocells and electronic timers. This device is intended for indoor
use. Do not use where directly exposed to water. Minimum operating temperature
is -20°C (-4°F). This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment. This Class B digital apparatus
complies with CAN ICES-005(B).
WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with a
minimum distance 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENCE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to is the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-005(B)
RADIATION EXPOSURE STATEMENT
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20 cm between the radiator and your body.
WARNING: This device contains license-exempt transmitters)/receiver (s)
that comply with Innovation, Science and Economic DevelopmentCanada’s license-
exempt RSS (s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
FCC RESPONSIBLE PARTY
Globe Electric
2264 East 6th Street
San Bernardino, CA 92410
www.globe-electric.com