globe 50594 Smart Bulb User Manual

SMART BULB
User Manual

50594 Smart Bulb

Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment.

Warranty: This product comes with a 3 year product warranty effective from the laJl date of purchase. If the failure of this product is caused by defects in the material or~ workmanship, it will be repaired or replaced at no charge to you. You must supply~ a copy of your dated cash register receipt when you request warranty service.
Return the product with your cash receipt as proof of purchase prepaid to Globe Electric Company Inc. Globe reserves the right to repair or replace the product at its option.
Repair or replacement, as described above, shall be the sole remedy to the customer and there shall be no liability on the part of Globe for any special, indirect, incidental or consequential damages, including but not limited to any loss of business or profits, whether or not foreseable. Some jurisdictions may not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any modification to this product or failure to comply with safety instructions will void the warranty.

FEATURES

• RGB: Choose from a full spectrum of colors
• Tunable white (2000 K- 5000 K): Choose from a focused bright white to a relaxed sunset glow
• Manually or remotely control your light with the Amazon Alexa app
• Pair with Amazon Echo to control your light through voice commands
• Set schedules and control your light from anywhere

SPECIFICATIONS

CONNECTING INSTRUCTIONS

1. Download the Amazon Alexa app.

2. Power on your device.
   Ensure your light bulb is screwed in and powered on.

3. Scan barcode
   • Launch the Amazon Alexa app.
   • Select “Add a Device.”
   • Select “Bulb,” locate Globe Electric and follow the in-app instructions on how to scan the 2D barcode.
   Please note:
   The device is automatically in pairing for 5 minutes once powered on. When you scan the barcode, the white light will flash indicating the pairing is successful. If it does not connect within 5 minutes, it does not connect, turn the device OFF and ON again to re-enter pairing mode.

Don’t have a barcode?
Select “Don’t have a barcode?” in the Alexa app and follow the in-a pp instructions on how to connect without a 2D barcode.
How to factory reset device
If you are struggling to set up your device, or if the device was already connected to a network, perform a factory reset by following the instructions below:

1. Turn the device ON for 5 seconds.
2. Turn OFF -wait 2 seconds-Turn ON (repeat 3 times)
3. Wait 5 seconds-the light will flash to indicate a successful reset
4.  Scan the inner barcode (located in the instruction manual), and connect within 15 minutes. If you fail to connect within the 15-minute time frame,
   turn the device OFF and ON again once to re-enter pairing mode.
   The light will flash WHITE to indicate that the pairing was successful.

Please keep these instructions in a safe place. This is the only duplicate of the unique QR code for your product. You may need it to reconnect the product to your account or
transfer it to another account.

FUNCTIONALITY

Voice control with Alexa

• On/Off
• Dimming
• Shades of white
• Colors
• Moods

Using the Amazon Alexa app on a mobile device
With the Amazon Alexa app, you can easily manage your home setup and directly control your Globe Electric lights.

• On/Off
• Dimming
• Shades of white
• Colors
• Out of home (remote) control

*Check out product videos on our YouTube channel, on the Globe Smart Home – Amazon Certified for Humans playlist!

https://www.youtube.com/playlist?list=PL37HUXHX-dbcKG0pjkrfv0QCp12SbIiWh

SAVE THESE INSTRUCTIONS
LIMITED WARRANTY: This bulb is warranted to last 3 years from the date of purchase based on use of 3 hours per day. If it fails before that time, we will replace it. Send Globe Electric the bulb, proof of purchase and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.
CAUTION: DO NOT USE WITH STANDARD DIMMER. Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control. The bulb can be switched to different operating modes and is dimmable through the Amazon Alexa app. For use only in 120V/60HZ circuits. Risk of electrical shock. Do not open, no user-serviceable parts inside. This device is not intended for use with emergency exit fixtures or emergency exit lights, photocells and electronic timers. This device is intended for indoor use. Do not use where directly exposed to water. This device shall not be used in a totally enclosed/recessed/sealed fixture. Minimum operating temperature is-20°C {-4°F).
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: {l) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This Class B digital apparatus complies with CAN ICES-00S(B).
WARNINC: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator and your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (l) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE STANDING PORTABLE FIXTURE USE ONLY WITH A PORTABLE TABLE LAMP THAT IS PROVIDED WITH A SHADE USE IN PORTABLE TABLE LAMPS IN WHICH THE DISTANCE FROM THE BOTTOM OF THE BASE TO THE TOP OF THE LAMPHOLDER DOES NOT EXCEED THREE {3) TIMES THE MINIMUM BASE DIAMETER THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS FCC RESPONSIBLE PARTY

Globe Electric
2264 East 6th Street
San Bernardino, CA 92470
www.globe-electric.com

Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to offer us your valuable feedback,you may contact us in the following ways:
Toll Free Telephone: l-888-543-1388 {North America Only) /Toll Free Fax: l-800-668-4562
{North America Only)

E-Mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department
750 Oneida, Montreal, Quebec, Canada H9R lAB
Please visit our website to discover other quality Globe products: http://www .globe-electric.com

References

• Electric | The Largest Consumer Energy & Renewables Platform

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>