OMNIKLAD WLSA04 Freedom Charge User Manual
- June 6, 2024
- OMNIKLAD
Table of Contents
WLSA04 Freedom Charge
User Manual
Thank you for choosing our Omniklad freedom charge cable with. To ensure optimal performance from this product, please read this user manual carefully and keep it safe for future reference, along with your receipt.
Safety Guidelines
- Do not disassemble the product in an attempt to modify, repair, or for any other purpose.
- Do not store in high temperatures such as intense sunlight t or other forms of heat.
- Do not place any magnetic strip cards or similar items (e.g. credit cards, ATM cards, boarding passes, etc.) near this product as the magnetic data on this product may get damaged.
- Do not drop, knock, or shake this product. Keep your product in a dry area. Humidity and liquids may damage the parts or electronic circuits.
- Use the original or a certified cable only.
- This is a mobile device and it is intended for desktop use.
Product Features
What’s inside
Operating Instructions
Viewing angles
Product Specifications
Model: WLS-A04-09
WLS-A04-02
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions : ( 1 ) This device may not cause harmful
interference, and ( 2 ) this device must acceptany interference received,
including interference that may cause undesired operation. This equipment has
been tested and found
to comply with the limits for a Class B digital device pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, usesInd can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on, the
user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
CAUTION : To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with certified
peripherals and shielded cables. All peripherals must be shielded and
grounded. Operation with non-certified peripherals or non-shielded cables may
result in interference to
radio or reception. Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC’s RF radiation exposure limits set forth for an
uncontrolled environment under the following conditions:
A separation distance of 20 cm or more should be maintained between this
device and persons during device operation. To ensure compliance, operation at
closer to this distance is not recommended. The antenna used for this
transmitter must not be co-located in conjunction with any other antenna or
transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>