OMNIKLAD WLS-A02-01 Freedom Charge Magnetic 2-in-1 User Manual
- June 5, 2024
- OMNIKLAD
Table of Contents
OMNIKLAD WLS-A02-01 Freedom Charge Magnetic 2-in-1
Thank you for choosing our Omniklad Wireless Charger. To ensure optimalperformance from this product,please read this user manual carefully and keep it safe for future reference,along with your receipt.
Safety Guidelines
-
Do not disassernble the product in an attempt to n1odify, repair or for any other purpose.
-
Do not store in high temperatures such as intense sunlight or other forms of heat.
-
Do not place any 1nagnetic stripe cards or si1nilar items ( e.g.credit cards, ATM cards,boarding passes etc.) near this product as the magnetic data on this product may get damaged.
-
Do not drop,knock,or shake this product. Keep your product in a dry area.
Humidity and liquids may damage the parts or electronic circuits. -
Use the original or a certified cable only
Product Features
What’s inside
Magnetic Wireless Charger
DC adapter
|
User Manual
Operating Instructions
Plug in DC adapter to the wireless charger using the cable provided . When the charger is tuned on, the charger is turned on, the LED light will flick alternately in white for 2S then go off.
Wireless Charging
Place your device on the center of the charging plate. The white light stays on white charing. If the device deviates from the center of the product, the wireless charging function may be affected.
wireless charging stan
All devices are supported in both vertical and side charge.
LED Behavior:
A. While powered up but not charging: LED off
B. While powered up and charging: LED on
C. While powered but in FOD/ Error/ Fault condition:
LED Blinks (@ 1.0Hz)
-Blinking sequence is 0.5 sec on, then 0.5 sec off
-Blinking continues while fault condition exists.
Notes
- Max 15W
- Compatible with 7.5W Quick Charger
- The Omniklad Wireless Charger is engineered to work with the most lightweight sn1artphone cases. H.owever, if the back of the smartphone case is thicker than 3rmn or contains 1netallic, 1nagnetic or battery materials, it may affect the functionality of the wireless charge.
Product Specifications
Model: WLS-A02-01
Adapter Input: DC19V–1.58A
Adapter Input: Output (Wireless): 5W & 7.5& 10W & 15W
Size: 130.87xl24.03×124.03
Charging frequency: 110-205 KHz
Transmission Distance: ≤8mun
FCC
This device complies with part 15 of the FCC Rules. Operations subject to the
following two conditions : ( 1 ) This device maynot cause harmful interference
, and ( 2 ) this device must acceptany interference received, including
interference that may cause undesired operation . This equipment has been
testedand found to comply with the limits for a Class B digital devicpursuant
to part 15 of the FCC Rules . These limits are designed to provide reasonable
protection against harmful interferencein a residential installation . This
equipment generates, usesInd can radiate radio frequency energy and , if not
installedand used in accordance with the instructions , may causeharmful
interference to radio communications . However there is no guarantee that
interference will not occur in a particular installation . If this equipment
does cause harmful interference to radio or television reception , which can
be determined by turning the equipment off and on , the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION : To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules , this device mustbe used with certified peripherals and shielded cables . All peripherals must be shielded and grounded . Operation with non-certified peripherals or non-shielded cables may resultin interference to radio or reception. Caution : Any changes or modifications not expressly approved by the party responsiblefor compliance could void the users authority to operate the equipment .
