COBY CPA640 True Wireless Party Speaker Instruction Manual

COBY CPA640 True Wireless Party Speaker Instruction Manual

Read Me

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Protect the power cord from being walked on or pinched particularly at plugs, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer.

Unplug this apparatus during lightning storms or when unused for long periods of time.

If repairs are necessary, please use qualified service personnel. Repairs may be necessary if the device has been damaged in any way. Such as the power- supply cord or plug being damaged, the device being exposed to rain or moisture, objects falling into the device, the device does not operate normally, or has been dropped.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Introduction

Thank you for purchasing the CPA-640. This instruction manual is intended to help you better understand and use your Bluetooth® Speakers. Terms covered in this manual will become more familiar to you as you use your speaker.

Before using this device for the first time, please fully charge the battery by plugging the provided Micro USB cable into the port of your speaker and plugging the other end into a local power source. The LED indicator will glow red to indicate that the speaker has begun charging and will turn off when the speaker is fully charged.

Note: The speaker must be charged up to 10% in order for it to work, even while plugged in. Please wait a few minutes after plugging in to

Package Contents

• 2 x True Wireless Speakers
• 2 x Charging cables
• 2 x 3.5mm AUX cables
• 1 x User manual

Product Overview

Back

Top

1. Power On/Off
2. Microphone Input
3. AUX Input
4. USB Input
5. Memory Card Input
6. Mode
7. Play/Pause
8. Previous Track/Decrease Volume
9. Next Track/Increase Volume
10. True Wireless Pairing
11. Light Mode
12. Charging Port

True Wireless Pairing

Your CPA640 speaker supports True Wireless Pairing, meaning you may transmit music from your device to both speakers at the same time with no wires connecting the two speakers.

When both speakers are turned on, they will automatically search for each other and connect seamlessly. You will hear an indicator tone as well as see a quick revolution of the light on both speakers to indicate that they have successfully paired with each other. In some instances, the speakers may take up to 15 seconds to connect.

In the event the speakers do not pair with each other, or you would like to disconnect the speakers from each other and use them individually, press True Wireless Pairing button on either speaker. To reconnect simply press the True Wireless Pairing button on the primary speaker.

Once the speakers are connected to each other connect your Bluetooth® device as instructed in Connecting Via Bluetooth® section on page 6.

Note: The speaker that’s connected to the Bluetooth® enabled device will become the primary speaker. If the user turns off the primary speaker, both speakers will turn off. True Wireless Pairing only works in Bluetooth® mode.

Connecting Via Bluetooth®

Open the Bluetooth® settings on a Bluetooth® enabled device (phone, tablet, laptop, etc.) Turn on the devices Bluetooth® functionality and select CPA640 when it appears. You will hear an indication tone to alert you that the device has connected successfully.

Note: On some devices you may need to scan for devices or search for devices, please reference your devices user manual on connecting Bluetooth® devices if you are unsuccessful

Music Controls

After you connect your device to the CPA640 music will be playable through your app of choice.

To pause or resume your music in Bluetooth® mode, USB Input mode, and Memory Card Input mode press the Play/Pause button. Adjust the volume by pressing and holding the Previous Track/Decrease Volume or Next Track/Increase Volume buttons. As you adjust the volume you will see the circular LED light display grow or shrink accordingly.

Light Modes

The CPA640 has 3 beautiful light modes with 10 distinct colors in each. Press the Light Mode button to cycle between each beautiful mode and select the one that suits your occasion best. The lights can also be turned off by cycling to the 4th option.

Radio

To begin scanning FM radio stations press the Play/Pause button this process may take a few minutes so please be patient. Once all the stations are downloaded you will hear the radio begin to play and cycle through stations. When you arrive at the station you want to listen to press the Play/Pause button again to stop cycling.

Note: if reception is not good you can plug in the included 3.5mm AUX cable to increase signal.

To manually switch FM radio stations, press Previous Track/Decrease Volume and Next Track/Increase Volume.

Karaoke Mode

Connect a wired microphone (not included) into the Microphone Input port, to allow you to sing along with your favorite songs.

AUX, Memory Card & USB Mode

Use the included AUX cable to connect on non-Bluetooth® enabled devices. Connect the other end to the device you wish to play audio from.

Note: When an AUX cable is connected, It will automatically unpair from any actively paired Bluetooth® device.

Insert a memory card or USB flash drive with MP3 files to play music directly on your speaker. See Music Controls on page 5 to make adjustments as necessary

Specifications

FCC Notice to Users

FCC ID: 2AMSOCPA640

Caution: Changes or modifications not expressly approved by the Party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection Against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, however there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for Help.

The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Summit Electronics LLC is under license. Other trademarks and trade names are those of their respective owner.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>