COBY CHBT590 Wireless Headphones Instruction Manual

WIRELESS HEADPHONES

Instruction
Manual CHBT590
**MODEL#: CHBT590

**

Read Me

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. If repairs are necessary, please use qualified service personnel. Repairs may be necessary if the device has been damaged in any way. Such as the power-supply cord or plug being damaged, the device being exposed to rain or moisture objects falling into the device, the device does not operate normally or has been dropped.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC NOTICE TO USERS:

FCC ID: 2AMSOHBT001
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection Against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, however, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  (1) this device may not cause harmful interference, and
  (2) this device must accept any interference received, including interference that may cause undesired operation. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Summit
  Electronics LLC is under license. Other trademarks and trade names are those of their respective owners.
  FCC Radiation Exposure Statement
  The device has been evaluated to meet general RF exposure requirements.
  The device can be used in portable exposure conditions without restriction.

INTRODUCTION

Thank you for purchasing the CHBT590! This instruction manual is intended to help you better understand and use your Bluetooth® Headphones. Terms covered in this manual will become more familiar to you as you use this device.

PRODUCT OVERVIEW

1. Power Button
2. Play/Pause/Call
3. Previous/Volume
4. Next/Volume+
5. Mode Button

OPERATION

Charging Your Head Phones
Connect one end of the provided Micro USB cable to the Headphones and the other to a power source. While the Headphones are charging the LED indicator light will turn
red. When it’s fully charged the light will turn off.

Powering On & Off
Power On: Press holds and release the “Power” button to turn the headphones on. The user will briefly see a solid blue light and hear a tone that means “Bluetooth® Mode.”
Power Off: Press hold and release the “Power” button to turn the headphones off. The user will see the LED Indicator flash red and hear a tone that means “Power Off”.

Connecting via Bluetooth

After powering on and hearing the “Bluetooth® Mode” prompt tone, the Headphones LED indicator will begin alternating between blue and red, indicating that the headphones are waiting to pair. To pair with it, open your Phone Bluetooth settings and look for “CHBT590” on the list of nearby devices and tap the name to pair. The user
will hear a tone that means “Connected” and see the LED indicator turn solid blue. This indicates that the devices have been successfully paired. The headphones will automatically connect with your smartphone the next time they’re both on, in range, and in pairing mode.
Note: You can use the provided AUX cable to listen to music without using Bluetooth.

Phone Commands

• Answer Call : When you receive an incoming call the user will hear a tone. To answer, press the “Play/Pause/Call” button.

• End Call: To end an ongoing call press the “Play/Pause/Call” button.

• Redial: In Bluetooth® Mode, double-tapping the
  The “Play/Pause/Call” button will redial the last number called or received. Note: When the phone receives or sends a call any music that is playing will be paused automatically.

• Reject Call: Double press the Play button.

Music Controls

• Play/Pause: When the Bluetooth® headset connects to a mobile phone, press the “Play/Pause/Call” button to play music from the phone. Press the “Play/Pause/Call” button again to turn off the music that is playing.
• Next song: Press and hold the “Next/Volume+” button to play the next song.
• Previous song: Press and hold the “Previous/Volume-” button to play the previous song.
• Increase volume: Press the “Next/Volume+” button until you reach the desired volume.
• Lower volume: Press the “Previous/Volume-” button until you reach the desired volume.

MP3 MODE

Press the “Mode” button to switch between Bluetooth and the MP3 mode as needed.

• Once the TF card is inserted the user will hear a tone to indicate that the device is in MP3 mode. After the voice prompt is heard music will automatically begin playing.

Note: MP3 mode is only available when a TF card is inserted.

Siri MODE

To activate the Siri mode, press and hold the Play/Pause button to prompt Siri (or another phone AI) to start listening.
After the Phone AI has been activated, you should release the Play/Pause button.

PACKAGE CONTENTS

• CHBT590 Headphones
• AUX Cable
• Micro USB Cable
• Manual

SPECIFICATIONS

SUMMIT ELECTRONICS LLC ONE YEAR LIMITED WARRANTY

SUMMIT ELECTRONICS LLC LIMITED WARRANTY (“Warranty”) ― For Product Categories Listed in Chart Below (as applicable, “Product”) Before returning your Product for service under this Warranty, please (i) read the instruction manual carefully. If you are still having trouble with your Product, please contact
Technical Support at support@summitcegroup.com

Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.

Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC (hereinafter called “SUMMIT ELECTRONICS LLC”) warrants to the original the purchaser of the Product (“Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non-commercial use (“Defects”). Warranty Period encompasses, as listed below, separate “Coverage Periods” for Parts and Labor, each Coverage Period for one year, to begin from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the applicable Warranty Period, SUMMIT ELECTRONICS LLC will, at its option, during the specified Coverage Periods for Parts and Labor (as applicable) either: (i) repair Product (or, as applicable, any component thereof) or (ii) replace the Product (or, as applicable, any component thereof) with a new or refurbished Product (or, as applicable, any component thereof), in either case, free of charge to Customer for Parts and/or Labor (as applicable) during the specified Coverage Period only, and excluding applicable shipping charges (noted below), for which the Customer is responsible. The foregoing states the Customer’s exclusive remedy and SUMMIT ELECTRONICS LLC’s sole liability for breach of the limited warranty contained herein.
This warranty specifically excludes any Product (or, as applicable, any component thereof) that has been subject to or Defects resulting from
(a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for the Product, any other Customer- induced damage, or the alteration or removal of any Product serial number: (b) any modification or repair to Product (or, as applicable, any component thereof) by any party other than SUMMIT ELECTRONICS LLC or a party authorized in writing by SUMMIT ELECTRONICS LLC; (c) any damage to Product (or, as applicable, any component thereof) due to power surges, incorrect electrical voltage, misconnection to any device, or malfunction of any device used with the Product (or, as applicable, any component thereof); (d) cosmetic damage to the Product (or, as applicable, any component thereof) caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts of God. Product is sold to Customer for personal, non-commercial use only. Product is not warranted for the Customer’s commercial or rental use. In addition, the Product is not warranted against failure, and should not be used by Customer for any application where (i) there is a risk that any data stored on Producwill be breached or otherwise compromised, or (ii) the data stored on Product is
relied upon for medical or lifesaving applications.
SUMMIT ELECTRONICS LLC disclaims any warranty for any of the foregoing uses to the fullest extent permitted by law. The customer assumes any and all risks associated
with such uses of Product and agrees to indemnify SUMMIT ELECTR- ONICS LLC for any damages claimed against SUMMIT ELECTRONICS LLC for such uses. EXCEPT FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY (I) OF MERCHANTABILITY, (II) OF FITNESS FOR A PARTICULAR PURPOSE, OR (III) OF NON- INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL SUMMIT ELECTRONICS LLC BE LIABLE TO THE CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF SUMMIT ELECTRONICS LLC HAS BEEN ADV ISED OF THE POSSIBILITY OF SUCH DAMAGES, SUMMIT ELECTRONICS LLC’S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE DAMAGES, IF ANY. This Warranty gives the Customer-specific rights, and the Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, the Customer must email SUMMIT ELECTRONICS LLC Technical Support prior to making a Product return.
Customer must include with Product return the following items (failure to enclose any of these items may result in a delay in the processing of your Warranty claim): (i) a dated sales receipt that indicates the place of purchase, the model number of Product, and amount paid; (ii) a detailed description of Customer’s problem with Product; (iii) Customer’s full name, phone number, and return address, and; (iv) a money order made out to SUMMIT ELECTRONICS LLC Electronics Corporation to cover return shipping charges to US destinations only, for the applicable dollar amount shown for the Product in the table above. SUMMIT ELECTRONICS LLC will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to the Customer. Return your Product freight-prepaid in its original packaging, or packaging
that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim (6 to 8 weeks from November to February).

$7.99
Alarm Clocks, Portable CD Players, Radios, Corded Telephones, MP3 Players, Digital Photo Frames (screen size less than 5″)| $7.99
Portable Stereo Systems, Speaker Systems, Cordless Telephones, Home DVD Players| $14.99
Home Theater DVD Systems, Portable DVD Players, Portable Media Players, Digital Photo Frames (screen sizes 5″ to 11″)| $21.99

You must email SUMMIT ELECTRONICS LLC Technical Support prior to making a return. Please ask if you are unsure of which category your product falls under

• US destinations only.

Contact Us at
support@summitcegroup.com
For Return Information

Documents / Resources

| COBY CHBT590 Wireless Headphones [pdf] Instruction Manual
HBT001, 2AMSOHBT001, CHBT590, Wireless Headphones
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>