COBY CPA800 True Wireless Party Speaker User Manual

**COBY CPA800 True Wireless Party Speaker User Manual

**

Read Me

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth
• Do not block any ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched particularly at plugs, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time.

If repairs are necessary, please use qualified service personnel. Repairs may be necessary if the device has been damaged in any way. Such as the power- supply cord or plug being damaged, the device being exposed to rain or moisture, objects falling into the device, the device does not operate normally, or has been dropped.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC Notice to Users

FCC ID: 2AMSOCPA800

Caution: Changes or modifications not expressly approved by the Party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection Against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, however there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for Help.

The device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Summit Electronics LLC is under license. Other trademarks and trade names are those of their respective owner.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Introduction

Thank you for purchasing the CPA800. This instruction manual is intended to help you better understand and use your Bluetooth® Speakers. Terms covered in this manual will become more familiar to you as you use your speaker.
Before using this device for the first time, please fully charge the battery by plugging the provided Micro USB cable into the port of your speaker and plugging the other end into a local power source. The Power LED indicator will light red to indicate that the speaker has begun charging and will turn off when the speaker is fully charged.

Note: The speaker must be charged up to 10% in order for it to work, even while plugged in. Please wait a few minutes after plugging in to charge.

Package Contents

• 1 x CPA800 True Wireless Speaker
• 1 x Charging cables
• 1 x 3.5mm AUX cables
• 1 x User manual

Product Overview

1. Microphone input port
2. Next Track/Channel button
3. Play/Pause button
4. USB input port
5. Previous Track/Channel button
6. Mode button
7. Charging port
8. Power LED indicator
9. Power/Volume button
10. AUX In port
11. LED display
12. TF card slot

Powering on/off the speaker

To power on the speaker, turn the Power/Volume button clockwise until you hear a click. To power off the speaker, turn the Power/Volume button anti-clockwise until you hear a click.

True Wireless Pairing

Your CPA800 speaker supports True Wireless Pairing, meaning you may transmit music from your device to two speakers at the same time with no wires connecting the two speakers.
To pair or unpair speakers with each other press and hold the Mode button on either speaker. When your speakers connect to each other you will the LED indicator on the primary speaker rapidly flashing red, and a solid red on the secondary speaker’s LED indicator.
Once the speakers are connected to each Other, connect your Bluetooth device as instructed in Connecting Via Bluetooth. .

Note: The speaker that’s connected to the Bluetooth® enabled device will become the primary speaker. If the user turns off the primary speaker, both speakers will turn off. True Wireless Pairing only works in Bluetooth® mode.

Connecting Via Bluetooth®

Press the Mode button on the speaker to select Bluetooth mode, The “BLUE” will slowly flash red on the LED display.
Open the Bluetooth settings on a Bluetooth enabled device (phone, tablet, laptop, etc.) Turn on the device’s Bluetooth® functionality and select CPA800 when it appears. You will hear a tone and see the “BLUE” is steady red to indicate that the device has connected successfully.

Note: On some devices you may need to scan for devices or search for devices, please reference your devices user manual on connecting Bluetooth® devices if you are unsuccessfully.

Music Controls

After you connect your device to the CPA800. music will be playable through your app of choice.
Press Mode button to select Bluetooth mode or AUX mode. The “BLUE” or “AUX” will be steady red on the LED display.
To pause or resume your music in Bluetooth mode, AUX Input mode, USB Input mode and Memory Card Input mode, press the Play/Pause button.
To skip to next track, press Next track/channel button. To skip to previous track, press Previous track/channel button.

Adjust the volume by turn the Power/Volume button clockwise or anti-clockwise. As you adjust the volume you will see the circular LED light display grow or shrink accordingly.

Light Mode

Press and hold the Play/Pause button to turn on the light. The light can also be turned off by pressing and holding the Play/Pause button again.

Radio

Press Mode button to select Radio mode. The “Rad” will be steady red on the LED display.
To begin scanning FM radio stations, press the Play/Pause button this process may take a few minutes so please be patient. Once all the stations are automatically downloaded and stored you will hear the radio begin to play and cycle through stations. When you arrive at the station you want to listen to, press the Play/Pause button again to stop cycling.

Note: if reception is not good you can plug in the included 3.5mm AUX cable to increase signal.
To manually switch FM radio stations, press Previous Track/Channel button and Next Track/Channel button.

Karaoke Mode

Connect a wired microphone (not included) into the Microphone Input port, to allow you to sing along with your favorite songs.

AUX, Memory Card & USB Mode

Use the included AUX cable to connect on non-Bluetooth enabled devices. Connect the other end to the device you wish to play audio from.

Note: When an AUX cable is connected, It will automatically unpair from any actively paired Bluetooth® device

Insert a memory card or USB flash drive with MP3 files to play music directly on your speaker. See Music Controls on page 7 to make adjustments as necessary.

Specifications

Bluetooth® Version: 5.0
Bluetooth® Range: 33 Feet
Bluetooth® Pairing Name: CPA800
Playtime Up to: 7 Hours
Charge Time: 5 Hours
Frequency Response: 20Hz – 20KHz
Driver Unit Size: 8 Inches
Impedance: 4 Ω
USB & Memory Card Storage: Up to 32 GB
FM   Radio: 87.5 MHz – 108.0 MHz
Battery Capacity: 1200mAh
Battery Type: Rechargeable Lithium-ion
Charge Voltage: 5V/1A
Output Power: 10W

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>