COBY CCR101 Portable Alarm Clock User Manual

CCR101 Portable Alarm Clock
User Manual Portabl Alarm Clock
Wireless Speaker

­Overview

Front View

Bottom View

Charging

The screen will display a charging indicator icon to indicate a successful charging.
When charging is complete, the icon will disappear. It takes about 3 hours to fully charge it.

Powering on/off

Powering on
Press and hold the Power Button for 3 seconds to power it on.

Power on tone notification

Powering off
Press and hold the Power Button for 2 seconds to power it off.

Power off tone notification

Setting the clock

1. Press the Power Button twice to enter clock setting.
2. When the hour digits on the left screen flashes, adjust it by pressing the “+” or”-” button; then press the Power Button twice again to save the hour and enter minutes setting.
3. When the minute digits on the right screen flashes, repeat the same procedure to adjust it.
4. Once you have set your desired clock, do not touch any button for five seconds and the clock will display the set clock and go back to the bluetooth mode, which means the clock has been set successfully.

Notes:

• The user can switch between 12-hour or 24-hour time format by pressing the”-” button twice.
• The screen will show the “AM/ PM” icon when in 12-hour time format, while it will not in 24-hour time format.

Setting your alarm timer

1. Press the “+” and”-” button at the same time to switch to alarm timer mode.
2. When the hour digits on the left screen flashes, adjust it by pressing the “+” or”-” button; then press the”+” and”-” button at the same time again to save the hour and enter minutes setting.
3. When the minute digits on the right screen flashes, repeat the same procedure to adjust it.
4. Once you have set your desired alarm timer, do not touch any buttons for five sec­ onds and the clock will display the current time and go back to the bluetooth mode, which means the alarm timer has been set successfully.

Notes:

• When in alarm timer mode, the Alarm indicator will light up in the middle bottom of the screen.
• The volume of the alarm timer is programmed at a fixed level, so the user cannot change it.
• To cancel the alarm timer, press and hold the “+” and”-” button at the same time.
• When the alarm timer is ringing, press any buttons to stop it.

Pairing

Bluetooth connection with your device
When the clock is turned on, it will automatically enter Bluetooth pairing mode.
Turn on Bluetooth in your device’s settings and search for “CCR1O1”, then tap “CCR1O1” to connect.

indicator: lighting up
Bluetooth Connected tone notification

The clock will automatically be paired with your last successfully connected media device next time it is turned on.

Controls

Music mode

Note: The highest volume level is 30. The device will make two repeated short beeps when reaching the highest.

Phone call mode

Replacing the battery

This device comes with a 18650 lithium battery. If charging fails, it means the battery may be depleted, please replace it with a new one. Under normal use, we recommend that you replace the battery once every two years.

1. Pull the battery cover upwards to remove.
2. Remove the old battery, and insert a new 18650 lithium battery of the same type (3.7V/ 1500mAh) according to the direction indicated in the battery compartment.
3. Fit the two clips of the battery cover into the gaps on the compartment, then press the cover downwards until it clicks into place.

Speaincations

Soeccatons are subject to change without notice.

Safety Statement

1. Avoid dropping.
2. Do not disassemble this device.
3. Do not expose this device to rain or moisture or submerge in water.
4. Ideal temperatures are 0°C to 35°C. Avoid extreme temperatures.
5. Keep the device away from excessive heat, such as sunshine, fire or the like.
6. Do not use the device outdoors during thunderstorms.
7. Use original or certified cables.
8. Do not use any corrosive cleaner/oil to clean.
9. Keep out of reach of children. It contains small parts which may be a choking
10. Observe local laws and regulations while using the device.
11. To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments.
12. Do not use, store or transport the device where flammables or explosives are Using your device in these environments increases the risk of explosion or fire.
13. Remove battery from the device if you are not going to use it for a long time.

FCC Statement
FCC ID :2AMSOSTW003
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not in­stalled and used in accordance with the instructions, may cause harmful interference to  radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer­ence to radio  or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help .
RF Exposure Statement:
This device complies with FCC radiation exposure limits set forth an uncontrolled environment and meets the FCC radio frequency RF exposure Guidelines .

Disclaimer
All information, design and specifications contained in this manual were correct at the time of this publication. As the product goes under continuous upgrades and chang­ es,  however, the final device may have slight differences. The contents of this manual are subject to change without prior notice, and Coby will not be liable for any errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual.
COBY” IS A REGISTERED TRADEMARK OF HEARST COMMUNICATION, INC. AND USED UNDER LICENSE BY SUMMIT ELECTRONICS, LLC.
© 2022 HEARST COMMUNICATION, INC. ALL RIGHTS RESERVED AND ANY USE OF SUCH MARKS BY SUMMIT ELECTRONICS LLC IS UNDER  LICENSE.
OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.
WARNING: CANCER AND REPRODUCTIVE HARM – WWW.P65WARNINGS.CA.GOV.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Fesco Distributors, Inc. is under license.  Other trademarks and trade names are those of their respective owners.

SUMMIT ELECTRONICS LLC One Year Limited Warranty

WARRANTY SUMMIT ELECTRONICS LLC LIMITED WARRANTY (“Warranty”) For product Categories Listed in Chart Below (as applicable, “Product”) Before  returning your Product for service under this Warranty, please (i) read the instruction manual care­ fully. If you are still having trouble with your Product, please contact  Technical Support at support@summitcegroup.com.
Warning: Some Products may contain components that are small enough to be swal­ lowed. Please keep out of reach of children.
Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC (hereinafter called “SUMMIT ELECTRONICS LLC”) warrants to the original purchaser of the  Product (“Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non-commercial  use (“De­ fects”).
Warranty Period encompasses, as listed below, separate “Coverage Periods” for Parts and Labor, each Coverage Period for one year, to begin from the original date of  Customer purchase. If Customer returns a defective Product (or any component thereof) during the applicable Warranty Period, SUMMITELECTRONICSLLC will, at its  option, during the specified Coverage Periods for Parts and Labor (as applicable) either: (i) repair the Prod­ uct (or, as applicable, any component thereof) or (ii) replace the  Product (or, as appli­ cable, any component thereof) with a new or refurbished Product (or, as applicable, any component thereof), in either case free of charge to Customer  for Parts and/ or Labor (as applicable) during the specified Coverage Period only, and excluding applicable shipping charges (noted below), for which the Customer is responsible. The foregoing states the Customer’s exclusive remedy and SUMMIT ELECTRONICS LLC’s sole liability for breach of the limited warranty contained herein.
This Warranty specifically excludes any Product (or, as applicable, any component thereof) that has been subject to or Defects resulting from: (a) any neglect or misuse by a  Customer, an accident, improper application, violation of operating instructions for the product, any other Customer-induced damage, or the alteration or removal of any product serial number: (b) any modification or repair to Product (or, as applicable, any component thereof) by any party other than SUMMIT ELECTRONICS LLC or a  party authorized in writing by SUMMIT ELECTRONICS LLC; (c) any damage to Product (or, as applicable, any component thereof) due to power surges, incorrect electrical voltage, misconnection 17 to any device, or malfunction of any device used with the Product (or, as applicable, any component thereof); (d) cosmetic damage to the  Product (or, as ap­ plicable, any component thereof) caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by  heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts of God. Product is sold to Customer for personal, non-commercial use only.  Product is not warranted for

Customer’s commercial or rental use.
In addition, Product is not warranted against failure, and should not be used by Custom­ er for any application where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the data stored on Product is relied upon for medical or lifesaving applications. SUMMIT ELECTRONICS LLC disclaims any  War­ ranty for any of the foregoing uses to the fullest extent permitted by law. Customer as­ sumes any and all risks associated with such uses of Product and agrees to  indemnify SUMMIT ELECTRONICS LLC for any damages claimed against SUMMIT ELECTRONICS LLC for such uses. EXCEPT FOR EXPRESS WARRANTIES  STATED ABOVE AND TO THE MAXIMUM EXTENTPERMITTED BYLAW, THE PRODUCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC  DISCLAIMS ALLOTHER WARRANTIES, INCLUD­ ING WITHOUT LIMITATION ANY IMPLIED WARRANTY(D) OF ERCHANTABILITY, (11) OF FITNESS  FOR APARTICULAR PURPOSE, OR (111) OF NON-INFRINGEMENT OF THIRD-PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY  APPLICABLE LAW, IN NO EVENT WILL SUMMIT ELECTRO- NICS LLC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT,  SPECIAL, INCIDENTAL, CONSEQUEN­ TIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR  REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF SUMMIT ELECTRONICS LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, SUMMIT ELECTRONICS  LLC’S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHAT­ SOEVER SHALL BE LIMITED TO THE  CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE DAMAGES, IF ANY. This Warranty gives Customer specifics  rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must email SUMMIT ELECTRONICS LLC  Technical Support prior to making a Product return. Customer must include with Product return the following items (failure to enclose any of these items may result in  a delay in the processing of your Warranty claim): (i) a dated sales receipt that indicates the place of purchase, model number of Product, and amount paid; (ii) a detailed  description of Customer’s problem with Product; (iii) Customer’s full name, phone number, and return address, and; (iv) a money order made out to SUMMIT ELEC­ TRONICS LLC Electronics Corporation to cover return shipping charges to US destina­ tions only, for the applicable dollar amount shown for the Product in the table above.

SUMMIT ELECTRONICS LLC will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to Customer. Return  your Prod­ uct freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim (6  to 8 weeks from November to February).

Customer Service
Servicio al Cliente
Contact us at support@summitcegroup.com for return information and customer support!

References

• www.ca.gov | California State Portal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>