COBY CPA909BK True Wireless Speaker User Manual

COBY CPA909BK True Wireless Speaker

Overview

Buttons and parts

Charging

To charge your speaker, connect one end of the provided USB cable to the Micro-USB port located on the back panel, then connect the other end to a USB power source.

Note:
When the battery is low, the speaker will make a tone notification from time to time, and the battery icon red on the LCD display. The light mode may not work properly, and the volume will turn lower, indicating that it requires charging. When the battery is depleted, the speaker will automatically power off.

Powering on / off

Powering on
To power on your speaker, slide the power switch on the back panel to the “ON” position.

Powering off
To power off your speaker, slide the power switch on the back panel to the “OFF” position.

Bluetooth Mode

Bluetooth connection with your device
When the speaker is turned on, it will automatically enter Bluetooth pairing mode. Turn on Bluetooth in your device’s settings and search for ‘‘CPA909’’, then tap ‘‘CPA909’’ to connect.

NOTE:
The speaker will automatically be paired with your last successfully connected media device next time it is turned on. EN 2

True Wireless Stereo connection

The CPA909 supports True Wireless Pairing, which lets you stream your music from your device to two CPA909 speakers acting as left and right audio channels for definitive and immersive stereo sound quality. To pair two speakers together, follow the steps below:

1. Bring the two speakers next to each other and turn them on. Make sure neither speaker is connected to any other Blue-tooth devices, such as your phone, tablet, or laptop.
2.  Press and hold the MODE button on either speaker until you hear a tone notification, which means both speakers are paired successfully.
3. Turn on your Bluetooth in your device’s settings and search for ‘‘CPA909’, then tap ‘‘CPA909’’ to connect. After they are successfully connected, you can stream music from your phone to both speakers.

NOTES

• Both speakers will reconnect automatically next time they are range, and in pairing mode.
• To unpair speakers, press and hold the Mode button on either speaker; to pair again, repeat the same operation.

For Music Playback

Note:
When you receive or make a call, the music that is playing will automatically pause. The person’s voice on the other end of the line can only be heard through your phone. When you end the call, the music will resume.

FM Radio mode
Upon powering on the speaker, Radio mode. it will automatically enter Bluetooth mode. Press the Mode button once to switch to the FM  Press the Play / Pause button to automatically search for the radio stations, then all available radio stations will be stored by the preset channel number in order, the first preset radio station While searching for the radio stations, press the Play / Pause button current frequency radio. to stop searching and broadcast the

Playing from external device

USB / TF card mode
Under any mode, insert a TF card into the TF card slot of your speaker, or insert a USB disk into the USB port of your speaker. It will automatically play the music files in the TF card / USB disk.

Microphone Mode
The speaker has a 6.35mm microphone port, which allows the user to connect the speaker with the provided microphone:

1. Ensure the speaker is in bluetooth mode. Plug one end of the microphone cable into the Microphone Jack of the speaker, and the other end into the MIC Out port of the microphone.
2.  Slide the power switch on the microphone to the ON position. Long press the Volume Up / Volume Down button on the speaker to set your desired volume. Now you can stream your sound from the microphone to the speaker.

Tips

• To unplug the microphone cable from the microphone, press and hold the clip on the microphone connector, then pull to remove.
• You can also connect other audio output instruments, such as electronic guitar and piano, using a microphone cable with a 6.35mm connector.

RGB Light Mode

In Bluetooth, TF card or USB mode, if the light is off, repeatedly press and hold the Play / Pause button light mode. And there are 3 light modes available, repeatedly press and hold the Play / Pause button light modes as follows: to enable the  to change the

Notes

•  The speaker will display the last set light mode the next time it is turned on.
•  RGB light effect works in bluetooth / TF card / USB card mode. It does not work in FM radio mode and microphone mode.

Specifications

2.5 Hours at 75% Volume

4.5 Hours at 50% Volume

Frequency Response| 90Hz-20kHz
FM Frequency Range| 87.5-108.0Mhz
Bluetooth Version| V5.1
Operation Range| 33ft (10M)
Supported Memory Cards| TF/SD up to 32 Gbyte
Dimension| 9.4×7.9×23” (240×200×580mm)
Weight| 99oz (2.8kg)

Safety stament Safety Precautions

1. Avoid dropping.
2.  Do not disassemble this device.
3. Do not expose this device to rain or moisture or submerge in water.
4.  Ideal temperatures are 0°C to 35°C. Avoid extreme temperatures.
5. Keep the device away from excessive heat, such as sunshine, fire or the like.
6.  Do not use the device outdoors during thunderstorms.
7. Use original or certified cables.
8. Do not use any corrosive cleaner/oil to clean.
9.  Keep out of reach of children. It contains small parts which may be a choking hazard.
10.  Observe local laws and regulations while using the device.
11. To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments.
12. Do not use, store or transport the device where flammables or explosives are stored. Using your device in these environ-ments increases the risk of explosion or fire.

FCC Statement

FCC ID: 2AMSOCPA909
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and  this device must accept any interference received, including interfer- ence that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Disclaimer

All information, design and specifications contained in this manual were correct at the time of this publication. As the product goes under continuous upgrades and changes, however, the final device may have slight differences. The contents of this manual are subject to change without prior notice, and Coby will not be liable for any errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual.

COBY COPYRIGHT 20© 22 ALL RIGHTS RESERVED. COBY IS A REGISTERED TRADEMARK OF CBY HOLDINGS, LLC. MANUFACTURED BY SUMMIT ELECTRONICS LLC. USED UNDER LICENSE. CBY HOLDINGS, LLC DOES NOT MANU-FACTURE THIS PRODUCT OR PROVIDE ANY MANUFACTURER’S WARRANTY OR SUPPORT. THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY THE BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY SUMMIT ELECTRONICS LLC IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE PROPERTY OF THEIR RESPECTIVE OWNERS.

WARNING:
CANCER AND REPRODUCTIVE HARM – WWW. P65WARNINGS.CA.GOV.

SUMMIT ELECTRONICS LLC One Year Limited Warranty

WARRANTY SUMMIT ELECTRONICS LLC LIMITED WARRANTY (“Warranty”) – For product Categories Listed in Chart Below (as applicable, “Product”) Before returning your Product for service under this Warranty, please (i) read the instruction manual carefully. If you are still having trouble with your Product, please contact Technical Support at support@summitcegroup.com. Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children. Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC (hereinafter called “SUMMIT ELECTRONICS LLC”) warrants to the original purchaser of the Product (“Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non-commercial use (“Defects”).

Warranty Period encompasses, as listed below, separate “Coverage Periods” for Parts and Labor, each Coverage Period for one year, to begin from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the applicable Warranty Period, SUMMITELECTRONICSLLC will, at its option, during the specified Coverage Periods for Parts and Labor (as applicable) either: (i) repair the Product (or, as applicable, any component thereof) or (ii) replace the Product (or, as applicable, any component thereof) with a new or refurbished Product (or, as applicable, any component thereof), in either case free of charge to Customer for Parts and/ or Labor (as applicable) during the specified Coverage Period only, and excluding

applicable shipping charges (noted below), for which the Customer is responsible. The foregoing states the Customer’s exclu-sive remedy and SUMMIT ELECTRONICS LLC’s sole liability for breach of the limited warranty contained herein.

This Warranty specifically excludes any Product (or, as applicable, any component thereof) that has been subject to or Defects resulting from: (a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for the product, any other Customer-induced damage, or the alteration or removal of any product serial number: (b) any mod- ification or repair to Product (or, as applicable, any component thereof) by any party other than SUMMIT ELECTRONICS LLC or a party authorized in writing by SUMMIT ELECTRONICS LLC; (c) any damage to Product (or, as applicable, any component thereof) due to power surges, incorrect electrical voltage, misconnection 17 to any device, or malfunction of any device used with the Product (or, as applicable, any component thereof); (d) cosmetic damage to the Product (or, as applicable, any component thereof) caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts of God. Product is sold to Cus-tomer for personal, non-commercial use only. Product is not warranted for Customer’s commercial or rental use.

In addition, Product is not warranted against failure, and should not be used by Customer for any application where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the data stored on Product is relied upon for medical or lifesaving applications. SUMMIT ELECTRONICS LLC disclaims any Warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any and all risks associated with such uses of Product and agrees to indemnify SUMMIT ELECTRONICS LLC for any damages claimed against SUMMIT ELECTRONICS LLC for such uses. EXCEPT FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENTPERMITTED BYLAW, THE PRODUCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS ALLOTHER WARRANTIES, INCLUDING WITHOUT LIM-ITATION ANY IMPLIED WARRANTY(I) OF ERCHANTABILITY, (II) OF FITNESS FOR APARTICULAR PURPOSE, OR (III) OF NON- INFRINGEMENT OF THIRD-PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL SUMMIT ELECTRO- NICS LLC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPE-CIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF SUMMIT ELECTRONICS LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, SUMMIT ELECTRONICS LLC’S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE

DAMAGES, IF ANY. This Warranty gives Customer specifics rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must email SUMMIT

ELECTRONICS LLC Technical Support prior to making a Product return. Customer must include with Product return the following items (failure to enclose any of these items may result in a delay in the processing of your Warranty claim): (i) a dated sales receipt that indicates the place of purchase, model number of Product, and amount paid; (ii) a detailed description of Customer’s problem with Product; (iii) Customer’s full name, phone number, and return address, and; (iv) a money order made out to SUMMIT ELECTRONICS LLC Electronics Corporation to cover return shipping charges to US destinations only, for the applicable dollar amount shown for the Product in the table above. SUMMIT ELECTRONICS LLC will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to Customer. Return your Product freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim (6 to 8 weeks from November to February).

PRODUCT CATEGORY

• Adapters, Converters, Chargers, Headphones, Microphones, Cellular Accessories  $7.99
• Alarm Clocks, Portable CD Players, Radios, Corded Telephones, MP3 Players, Digital Photo Frames (screen size less than 5”) $7.99
• Portable Stereo Systems, Speaker Systems, Cordless Telephones, Home DVD Players $14.99
• Home Theater DVD Systems, Portable DVD Players, Portable Media Players, Digital Photo Frames (screen sizes 5” to 11”) $14.99

You must email SUMMIT ELECTRONICS LLC Technical Support prior to making a return.Please ask if you are unsure of which category your product falls under. US destinations only.

References

• Coby
• P65WARNINGS.CA.GOV

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>