twelve south 12-2019 PowerPic mod Wireless Smartphone Charger Owner’s Manual

twelve south 12-2019 PowerPic mod Wireless Smartphone Charger

Getting started with PowerPic mod

What’s In the Box

1. PowerPic Charger
2. PowerPic Base
3. 5ft USB-C Power cable

Setting up your PowerPic mod

PowerPic mod looks great by Itself· but lfyou would like to add a graphic or pk first, see ”Adding a photo or artwork” first, then return to the setup

l. Gently insert the PowerPlc Charger into the PowerPic Base as shown. The PowerPic Charger can be placed In portrait or landscape positions

2. Plug the 5ft USB-C Power Cable into the PowerPic Charger and then into any 20W USB-C charger (USB-C charger not Included).

Charging options & positions

PowerPic mod can cha1ge most mobile phones in three optional positions:

1.  frame portrait/phone portrait
2. frame portrait/phone landscape
3. frame landscape/phone landscape.

PowerPlc status light

Adding a photo or artwork

1. Gently pull the PowerPlc Charger front plate from its magnetic fasteners.
2. Place your 4×6 image or pattern onto the PowerPlc Charger and then retum the front plate to Its magnetic fasteners.

Additional notes & specs

The foreign object detection light alerts you to objects between your device and PowerPlc that could affect charging. This helps to prevent the charger from emitting unnecessary power and heat that could damage your smartphone and other heat-sensitive Items.

To prevent overheating and damage to your PowerPlc or device:

• Do not place any foreign objects, such as metal or magnets, between the phone and PowerPlc, This may Interfere with charging, causing overheating or damage to the device.
• Do not place any magnetic stripes or IC chip card on the PowerPlc. This may cause damage.
• Do not cover the charging base with any material or cloth. This may interfere with charging performance.
• Do not let dust accumulate on the charging stand and keep the surface clean.

ISED compliance statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada s licence-exempt RSS(s). Operation Is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.\

ISED Radiation Exposure statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 10 cm between the radiator and your body.
Cet equipement est conforme aux limites d’exposition aux radiations IC CNR-102 etablies pour un environnement non contr6le. Cet equipement doit itre installe et utilis4 avec une distance minimale de lOcm entre le radiateur et votre corps.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC ID Statement
This equipment complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device mu.st accept any Interference received, Including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment

IC Statement

Disclaimer:
Operation is subject to the following two conditions:
This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device.
PowerPic Charging Plate Tech Specs
Input connector: USB Type c
Note: Included cable Is 1.5m USB Type C to USB Type C

Input: 5V /2A ‘IV /1.67A
Output: 5W/7.5W/10W
Operation Frequency: 110.6-146.6KHZ
Modulation type: CVS
Antenna Type: Coll Antenna
Charging efficiency: 72%
FCC ID : 2AREB·12-2019
IC: 24335.122019

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>