lbx instruments V05 Adjustable Speed Vortex User Manual

: June 3, 2024
: lbx instruments

Table of Contents

lbx instruments V05 Adjustable Speed Vortex
Preface
Warranty
Safety Instructions
Inspection
Trial Run
Operation
Maintenance and Cleaning
Associated Standards and Regulations
Specifications
Accessories
Applications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

lbx instruments V05 Adjustable Speed Vortex

Preface

Users should read this manual carefully, follow the instructions and procedures, and beware of all the cautions.

Service
In order to guarantee this equipment Works safely and efficiently, it must have a regular maintenance. In case of any faults, do not try to repair it yourself. If help is needed, you can always contact your dealer or Labbox via www.labbox.com Please provide the customer care representative with the following information:

Serial number
Description of the problem
Your contact information

Warranty

This instrument is warranted to be free from defects in materials and workmanship under normal use and service, for a period of 24 months from the date of invoice. The warranty is extended only to the original purchaser. It shall not apply to any product or parts which have been damaged on account of improper installation, improper connections, misuse, accident, or abnormal conditions of operation. For claims under the warranty please contact your local supplier.

Safety Instructions

Wear personal safety items to avoid the risk from
Splashing of liquids.
Mechanical vibration may lead to glass breakage.
Trapping parts of the body, hair or pieces of clothing in the moving parts.
During manual manipulation:
Keep medium vessels vertical as much as possible.
Mix the medium in the minimum pressure required.
Set up the instrument in a spacious area on a stable, clean, non-slip, dry and fireproof surface. Do not operate the instrument in explosive atmospheres, with hazardous substances or underwater.
Put the speed control knob to the lowest position. Gradually increase the speed, reduce the speed if:
The medium splashes out of the vessel because of too high speed.
The instrument is not running smoothly or moves on the stage.
Safe operation is only guaranteed with the accessories described in the “Accessories” chapter.
Accessories must be securely attached to the instrument and cannot come off by themselves.
Check the instrument and accessories before each use. Do not use damaged components.
Place a vessel at the center of the mixing head.
A sharp-edged vessel can wear out the mixing head.
Always disconnect the plug before fitting accessories.
The instrument may heat up when in use.
The operating voltage required on the label and voltage supply network must match.
Protect the instrument and accessories from bumps and impacts.
The instrument may only be opened by qualified and trained technicians.

Proper Use
The instrument is designed for mixing liquids in schools, laboratories or factories. This device is not suitable for use in residential areas or other areas that may cause danger to the user or instrument as mentioned in Chapter

Inspection

Receiving Inspection
Unpack the equipment carefully and check for any damages which may have arisen during the transport. Please contact the manufacturer/supplier for technical support.

Listing of Items
The package includes the following items:

Trial Run

If these operations above are normal, the instrument is ready to operate following the “operation” chapter. If these operations are not normal, the instrument may be damaged. Please contact the manufacturer/supplier for technical support.

Operation

A	Mixing Head
B	Continuous mode indicator (Low speed area)
C	Touch mode indicator (High

speed area)

D| Power LED
E| Speed control knob
F| Two direction switch

Continuous operating

Place the speed control knob at the lowest position. Put the instrument on a stable and safe place and plug in the main power.
Push the two-direction switch left to ON and the power LED is lit.
Turn the speed control knob to set the speed.
Push the two-direction switch right gently to turn it OFF.

Touch operating

Place the speed control knob at the lowest position. Put the instrument on a stable and safe place and plug in the main power.
Push the two-direction switch right to the touch mode.
Turn the speed control knob to set the speed.
If a test tube is pressed into the mixing head vertically, the instrument will begin to work and the power LED will be lit.
Push the two-direction switch left gently to OFF.

Maintenance and Cleaning

Proper maintenance can keep the instrument working and extend its lifetime.
Do not spray the cleanser into the instrument when cleaning.
Unplug the power line when cleaning.
Only use the cleanser as shown below:
For materials that are not listed, please request information from the manufacturer/supplier.
Before using another method for cleaning or decontamination, the user must ascertain with the manufacturer/supplier whether this method will not harm the instrument.
Wear the proper protective gloves during the cleaning of the instrument.