beurer HM 22 Thermo Hygrometer Instruction Manual

June 6, 2024
Beurer

beurer - logo

beurer HM 22 Thermo Hygrometer

HM 22

Getting to know your device

Using the HM 22 Thermo hygrometer, you can measure the current room temperature and relative humidity and read them from the display. In addition, the Thermo hygrometer has a timer that you can set.
Due to its handy size, you can set up the Thermo hygrometer anywhere. There is a mounting fixture on the back of the Thermo hygrometer that you can use to attach the device to the wall.

Included in delivery

1 x Thermo hygrometer
2 x AAA batteries
1 x set of these instructions for use

Signs and symbols

The following symbols appear in the instructions for use and on the device:

| WARNING| Warning notice indicating a risk of injury or damage to health
---|---|---
| IMPORTANT| Safety note indicating possible damage to the device/accessory
| Note| Note on important information
| Read the instructions for use
| CE labelling
This product satisfies the requirements of the applicable European and national directives
| WARNING| Warning notice indicating a risk of injury or damage to health
---|---|---
| IMPORTANT| Safety note indicating possible damage to the device/accessory
| Note| Note on important information
| Read the instructions for use
| CE labeling
This product satisfies the requirements of the applicable European and national directives
| Disposal in accordance with the Waste Electrical and Electronic Equipment EC Directive – WEEE
| Do not dispose of batteries containing harmful substances with household waste
| Manufacturer
|  Dispose of packaging in an environmentally friendly manner
| The products demonstrably meet the requirements of the Technical Regulations of the EAEU

Proper use

WARNING
The device is solely intended for measuring humidity and room temperature. The device is intended for private use only. Use the device for the purpose it was developed for only and in the manner specified in these instructions for use. Any form of improper use can be dangerous! The manufacturer is not liable for damage
resulting from improper or incorrect use.

Warnings and safety notes

WARNING

  • Keep packaging material away from children. There is the risk of suffocation.
  • The device is not a toy. Keep out of the reach of children.
  • Under no circumstances should you open or repair the device yourself, as faultless functionality can no longer be guaranteed thereafter. Failure to comply will invalidate the warranty.
  • For repairs, please contact Customer Services or an authorized retailer.
  • Keep the device away from naked flames (e.g. candles).
  • Never submerge the device in water or other liquids.
  • Never use the device underneath a cover, such as a blanket or a pillow.
  • Do not use the device outside.

Notes on handling batteries

WARNING

  • If your skin or eyes come into contact with battery fluid, rinse the affected area with water and seek medical assistance.
  • Choking hazard! Small children may swallow and choke on batteries. Therefore, store batteries out of the reach of small children.
  • Observe the plus (+) and minus (-) polarity signs.
  • If a battery has leaked, put on protective gloves and clean the battery compartment with a dry cloth.
  • Protect batteries from excessive heat.
  • Risk of explosion! Do not throw batteries into a fire.
  • Do not charge or short-circuit batteries.
  • If the device is not to be used for a long period of time, remove the batteries from the battery compartment.
  • Use identical or equivalent battery types only.
  • Always replace all batteries at the same time.
  • Do not use rechargeable batteries.
  • Do not disassemble, open or crush the batteries.

**IMPORTANT**

  • Protect the device from knocks, dampness, dust, chemicals, significant fluctuations in temperature, direct sunlight, splashes, and sand, and ensure that sources of heat are at a sufficient distance (ovens or heaters).
  • Do not place any objects on top of the device.
  • Clean the device with a damp cloth. Do not use any abrasive cleaning products.
  • Use and store the device at an ambient temperature between -10°C and 50°C. Higher or lower temperatures may damage the device.
  • In a changing environment, the device requires 10 minutes to deliver a reliable measurement.
  • Before using the device for the first time, remove the protective film from the display.

Device description

beurer HM 22 Thermo Hygrometer - Device description
Front

1   [1 min] button
2   [CLEAR] button
3   [10 min] button
4  Display

beurer HM 22 Thermo Hygrometer - Device description
Rear

1 Sensor cover 5 [ TIME ] button
2 Battery compartment lid 6 [ UP/CF ] button
3 Fold-out stand 7 [ DOWN ] button
4 Mounting fixture 8 [ RESET ] button
9 Battery compartment

Initial use

7.1 Inserting the batteries

Before you can use the Thermo hygrometer, you first have to insert two AAA batteries (included in delivery) into the battery compartment. Proceed as follows:

  1. A round battery compartment lid is located on the rear of the Thermo hygrometer. Twist the battery compartment lid anti-clockwise. Now remove the battery compartment lid.
  2. Insert the two AAA batteries included in delivery into the battery compartment. When inserting the batteries, pay attention to the correct polarity (+/-), as shown in the battery compartment. As soon as the batteries are correctly inserted, all display elements appear on the display for 3 seconds. The Thermo hygrometer then automatically switches to standard mode.
  3. Before you replace the battery compartment lid, you first have to set the date and time. To do so, follow the instructions in the following section.
Setting the date/time/temperature unit
  1. To switch between the 12 and 24-hour modes, press the [TIME] button. To switch between Celsius (°C) and Fahrenheit (°F), press the [UP/CF] button.

  2. The order in the settings menu is:
    Year -> Month -> Day -> Hour -> Minute
    To access the settings menu, press and hold the [TIME] button for 3 seconds. The year starts to flash in the display.

  3. Set the current year using the [UP/CF]/[DOWN] buttons. Confirm using the [TIME] button. The month now flashes in the display.

  4. Now set the month, day, hour, and minute one after the other in the same manner using the  UP/CF]/[DOWN] buttons and confirm each using the [TIME] button.
    If you do not press any buttons for 7 seconds in the settings menu, you will automatically exit the settings menu.

  5. Place the battery compartment lid back on the battery compartment.

  6. To close the battery compartment lid, twist it in a clockwise direction until you feel it click firmly into
    place. Make sure that the arrow markings of the device and the battery compartment lid line up.beurer HM 22 Thermo Hygrometer - close the
battery

  7. You can use the fold-out stand to create a standalone device or you can mount it on the wall using
    the mounting fixture (on the back of the device).

Resetting to factory settings

To reset the date and time to factory settings, briefly press the [RESET] button using a pointed object.

Usage

The Thermo hygrometer has a standard mode and a timer mode.

8.1 Standard mode

If you do not press any buttons on the Thermo hygrometer, the standard model is automatically shown on the display. beurer HM 22 Thermo Hygrometer -
Standard mode

Note
After initial use, it may take 10 minutes until the correct temperature and humidity
are displayed.

Timer

You can also set a timer of up to 99 minutes on the Thermo hygrometer.

  1. In order to start the timer, set your desired timer duration using the [1 min] button and the [10 min] button. The set timer duration appears in the center of the display. If you do not press any buttons for 3 seconds, the timer starts automatically with a beep. A beep sounds again when the timer elapses. To switch off the beep, press the [CLEAR] button.
  2. In order to end a timer early, press the [CLEAR] button.

beurer HM 22 Thermo Hygrometer - end a time

Cleaning and maintenance

IMPORTANT

  • Clean the device with a damp cloth. Do not use any abrasive cleaning products or hard brushes.
  • Under no circumstances may liquid enter the device.
  • If you do not plan to use the device for a long period of time, we recommend that you store it in the original packaging in a dry environment, ensuring it is not weighed down by additional items.

What if there are problems?

Problem| Possible cause|

Solution

---|---|---
The device will not switch on| Flat batteries| Insert new batteries
appears on the display| Batteries almost flat| Insert new batteries
The device will not switch on although new batteries have been inserted| The device is faulty| Contact Customer Services
LL.L appears on the display| Room temperature below -10°C (14°F)| Room temperature is outside the measurement range
HH.H. appears on the display| Room temperature above 50°C (122°F)| Room temperature is outside the measurement range
LL appears on the display| Relative humidity below 20%| The relative humidity is outside the
measurement range
HH appears on the display| Relative humidity above 95%| The relative humidity is outside the
measurement range
The device displays an incorrect temperature and relative humidity or does not display them at all| Changing environment| After initial use, it may take 10 minutes until the correct data is displayed

Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its service life. Dispose of the device at a suitable local collection or recycling point in your country. Dispose of the device in accordance with EC
Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.

Battery disposal

Empty, completely flat batteries must be disposed of through specially designated collection boxes, recycling points, or electronics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful substances:
Pb = battery contains lead,
Cd = battery contains cadmium,
Hg = battery contains mercury.

Technical specifications

Type HM 22
Item number 678.04
Supply 2 x 1.5 V __AAA LR03 battery
Weight 135 g (without batteries)
Dimensions 110 x 105 x 29.5 mm
Temperature measurement range -10 to 50°C (14 to 122°F)
Humidity measurement range 20 to 95% relative humidity

Warranty/service

Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this product, subject to the requirements below and to the extent described as follows.
The warranty conditions below shall not affect the seller’s statutory warranty obligations which ensue from the sales agreement with the buyer.
The warranty shall apply without prejudice to any mandatory statutory provisions on liability.

Beurer guarantees the perfect functionality and completeness of this product.
The worldwide warranty period is 3 years, commencing from the purchase of the new, unused product from the seller.

The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the context of domestic use.
German law shall apply.

During the warranty period, should this product prove to be incomplete or defective in functionality in accordance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.

If the buyer wishes to make a warranty claim, they should approach their local retailer in the first instance: see the attached “International Service” list of service addresses.

The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required.

A warranty claim shall only be considered if the buyer can provide
Beurer, or an authorized Beurer partner, with
–  a copy of the invoice/purchase receipt, and
–  the original product.
The following are explicitly excluded from this warranty:
–  deterioration due to normal use or consumption of the product;
–  accessories supplied with this product which are worn out or used up through proper use (e.g. batteries, rechargeable batteries, cuffs, seals, electrodes, light sources, attachments, and nebulizer accessories);
–  products that are used, cleaned, stored or maintained improperly and/or contrary to the provisions of the instructions for use, as well as products that have been opened, repaired or modified by the buyer or by a service center not authorized by Beurer;
–  damage that arises during transport between manufacturer and customer, or between the service center and customer;
–  products purchased as seconds or as used goods;
–  consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liability or other compulsory statutory liability provisions).
Repairs or exchanges in full do not extend the warranty period under any circumstances.

Beurer GmbH Söflinger Straße 218  89077 Ulm, Germany www.beurer.com 
www.beurer-gesundheitsratgeber.com
www.beurer-healthguide.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals