FPC SECURITY FPC-6357 Door Access Control Installation Guide
- June 6, 2024
- FPC SECURITY
Table of Contents
FPC SECURITY FPC-6357 Door Access Control
OVERVIEW
ATTENTION! QUICK TIPS, MUST READ BEFORE INSTALLING
- You will only need to hardwire the power supply to the mini Receiver and from any electric lock to the receiver.
- The Keypad and Exit Button are 100% completely wireless. Installation is easier, no wire is needed to connect these devices. Just mount it on the wall and you are good to go .
- In order to properly install this kit it is recommended that you use 18/2 or 20/2 gauge wire . . Before installing this kit, check with your local fire Authority for compliance of fire codes.
- We are not responsible for the improper installation of this kit. This is an example of how it should be installed but all applications are different.
- If you are not handy with electrical components, please consult with a certified electrician or Locksmith.
- Make sure that when you are installing this kit, please have all components turned
Need assistance? Contact Us: 1-888-504-3318 II support@fpc- security.com II www.fpc- security.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>