twelve south 12-2145 HiRise 3 3-in-1 Desktop Charging Stand Owner’s Manual

twelve south 12-2145 HiRise 3 3-in-1 Desktop Charging Stand Owner’s Manual

What’s in the box

1. HiRise 3, 3-in-1 desktop charging stand

2. 5ft USB-C Power Cable

Getting started with HiRise 3

1. Peel the protective plastic off the anti-slip feet.

2. Plug the Sit USB-C Power Cable into HiRise 3 and then into any 20W USB-C or higher power adapter (USB-C power adapter not included).
   

Charging three devices at once

1. **Front MagSafe-compatible charger

** Place MagSafe-compatible iPhone or AirPods on front charger until secured in place by the magnets.

2. **Base Wireless charger

** Place any wireless charging device on base charger. Position directly on top of logo and confirm on the device that it is charging.

3. Top Apple Watch Charger
   
   Place Apple Watch on top charger. Look for the charging icon on Apple Watch to confirm charging has begun.

HiRise 3 Status Light

Notes:
Status light not available for Apple Watch. Please check the individual devices for detailed charging status.

ISED statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Information
This equipment complies with IC RSS-216 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.

Additional notes & specs

The foreign object detection tight alerts you to objects between your devices and HiRise 3 that could affect charging. This helps to prevent the charger from emitting unnecessary power and heat that could damage your smartphone and other heat-sensitive items.

To prevent overheating and damage to your HiRise 3 or devices:

• Do not place any foreign objects, such as metal or magnets, between the phone and HiRise 3. This may interfere with charging, causing overheating or damage to the device.
• Do not place any magnetic stripes or IC chip cards on the HiRise 3. This may cause damage.
• Do not cover the charging base with any material or cloth. This may interfere with charging performance.
• Do not let dust accumulate on the charging stand and keep the surface clean
• Do not disassemble HiRise 3 or throw it into fire or water, to avoid short circuit leakage. Also avoid using HiRise 3 in hot, humid or corrosive environments.
• Please keep a distance of at least 20cm between implantable medical devices (pacemakers, cochlear implants, etc.) and HiRise 3 to avoid potential interference with the medical device.

FCC ID Statement

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

IC Statement
Disclaimer:
Operation is subject to the following two conditions:
This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

HiRise 3 Charging Plate Tech Specs
Input connector: USB Type C
Note: Included cable is 1.5m USB Type C to USB Type C

Input: DC 9.0V/2.0A
Output: 5W/7.5W/10W
Front Output: 10W Max
Base Output: 5W Max
Top Output: 3W Max
Charging efficiency: a75%

FCC ID: 2AREB•12.2145
IC: 24385.122145

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the ‘party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device; pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmen: generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from :hat to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your buoy: Use only the supplied antenna.

Have questions?
Visit twelvesouth.com or
contact support@twelvesouth.com ©2022 Twelve South, LLC. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>