twelve south AIRFLYDUO2 Bluetooth Transmitter Connects Wireless Headphones User Guide
- October 30, 2023
- twelve south
Table of Contents
- Twelve South AIRFLYDUO2 Bluetooth Transmitter Connects Wireless
- Pairing AirFly Duo with AirPods
- Pairing AirFly Duo with Wireless Headphones
- Turning AirFly Duo On & Off
- Reconnecting Your AirPods or Headphones Back to Your Smartphone/Tablet
- Charging AirFly Duo
- Tips & Tricks
- Status Light Guide
- FCC STATEMENT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Twelve South AIRFLYDUO2 Bluetooth Transmitter Connects Wireless
Headphones
Pairing AirFly Duo with AirPods
- To enter Pairing Mode, first turn on AirFly Duo then press and hold button 1 for four seconds – until light flashes white and amber.
- To enter Pairing Mode on AirPods, first place AirPods inside the Charging Case. With lid open, press and hold the button on the back or the charging case unanine rent tastes white.
- Once successfully paired; the light on your AirPods Charging Case will turn green and the light on AirFly Duo will be sold white and turn off after o seconds. To pair a second set of AirPods, repeat using button 2. (See page 10 for more details)
- It can take up to 90 seconds for initial pairing, but Airfly Duo will remember your AirPods when re-connecting in the future.
- Plug Airfly Dio into any device to listen to audio wirelessly.
Pairing AirFly Duo with Wireless Headphones
- To enter Paling Mode, first turn on Airfly Duo then press and hold button 1 for four seconds – until the light flashes
- Put the second set of headphones into Bluetooth Pairing Mode (refer to your headphones’ owner’s manual tor more details To add a second pair of AirPods, please refer to AirPod pairing on page 1
- Once successfully paired, the light on Airfly Duo will be solid white and turn oft alter to seconds
- “It can take up to 90 seconds for initial pairing, but AirFly Duo will remember your headphones when TeCnnecane In the future.
Turning AirFly Duo On & Off
Use the switch on the side of AirFly Duo to turn it on or on. Slide un to turn on. Slide down to turn off. AirFly Duo will reconnect to both sets of headphones when turned back on.
Reconnecting Your AirPods or Headphones Back to Your Smartphone/Tablet
Once paired, Airfly Duo will remember your AirPods / Headphones and switch to them when the unis turned on to switch Dack O USing VOUr ATFOOS Ticadphones wits your ›martohone or Tabict, first turn Airtly Duo oft. On your device, pen Bluetooth Settings, and select your headphones from the list. The status will change from Not Connected to Connected once the headphones are successfully paired with our device.
Charging AirFly Duo
To recharge, simply plug the included USB-C to USB-A Charging Cable into AirFly Duo, and then into any powered USB port. AirFly Duo is fully charged within 2 hours. The internal battery of Airfly Duo lasts about 20 hours. We recommend fully charging Airfly Duo before using it for the first time. If your AirFly Duo is low on power, it will flash amber 3 times to alert you that it will need to be charged soon. While charging, the AirFly Duo will illuminate in amber and stay on. Once fully charged, the amber light will turn off.
Tips & Tricks
- If only one AiPod seems to be playing audio, turn AirFly off and back on. This will e-sync Airriv and should reconnection AmPoos.
- If you want to pair a new set of headphones to Airfly or are having trouble connecting to your headphones, reset AirFly Duo by pressing and holding the Reset button on the side of Airtly Duo for 4 seconds Once reset. AirFly Duo will blink amber 4 times and then will go into Pairing Mode.
Status Light Guide
FCC STATEMENT
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Avoids to use of the battery in the following conditions:
- High low extreme temperatures that a battery can be subjected to during use, storage, or transportation.
- Low air pressure at high altitude.
- Replacement of a battery with an incorrect type can defeat a safeguard.
- The applied nameplate is located at the bottom of the product.
Use only power supply with output rating 5V DC 3A max. of PS1, 15W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>