plum MOBILE RAM Plus 4G Mobile Phone User Manual

: June 4, 2024
: plum MOBILE

plum MOBILE RAM Plus 4G Mobile Phone

Safety Precautions

Aircraft
Switch off in aircraft and follow any restrictions. Wireless devices can cause interference in aircraft.
Vehicles
Never use your device while driving. Place it in a safe place. Position your device within easy reach. Be able to access your device without removing your eyes from the road.
Electronic devices
In some circumstances your device may cause interference with other devices.
Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Pacemakers and other medical devices
Pacemaker manufacturers recommend that a minimum separation of 8 inches be maintained between a wireless device and a pacemaker to avoid potential interference with the pacemaker. Operation of any radio transmitting equipment, including wireless phones may interference with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so.

Operating environment

When connecting to other device, read its user guide for detailed safety instructions. Do not connect incompatible products. Do not place your device in the air bag deployment area. Use the device only in its normal operating positions as explained in the product documentation. Always switch off your device when its use is prohibited or when it may cause interference and danger.

Areas with posted regulations
Switch off your device when any regulations posted in these areas instruct you to do so.

Plum Rugged Device Quick Start Guide

Only use approved PLUM chargers, cables & accessories.
Ensure the USB Port Flap is correctly sealed to protect from water& moisture.
Ensure that the rubber seal inside the battery door is placed correctly. Improper use can cause damage to the device.
IP-67/68 Certified devices are water proof in depths of 1 meter or less and can be submerged for up to 20 minutes.
Rinse the device with fresh water after submission in salt water, dirt, dust, etc.
Rugged devices are designed to withstand falls from up to 1 meter in height.

Plum Mobile& authorized service centers are responsible for determining warranty status, misuse or abuse

Phone Description

Getting started

Installing the SIM and the Micro SD card

To insert the SIM card and Micro SD card, please make sure your phone is Power off, then remove the cover, battery and other external power connection. To loose the screw of the battery cover, please use the coin or tools to rotate the screw of the battery cover counterclockwise Tight the screw of the battery cover back when the SIM/ SD card are inserted

To insert the SIM card

Slide the Metal down to unlock the tray.
Lift up the cover and insert the Nano SIM
Put down the metal cover then slide it up to lock the Card tray

To insert the memory card(MicroSD)
Insert the card into the slot until it fixed:

Charging the Battery

You can charge the device with a travel adapter/ Desktop charger or by connecting the device toa PC with a USB cable. Charge for 12 hours before the first using is recommended.
Warning: Please use original charger and battery. Unapproved accessories and Battery can cause explode or damage your device.

Setting up the APN data
You have to setup a usable APN before you access to the internet, contact to your network provider if you don’t know this information Go to: SettingsConnections Network account Options New connection and input the correct information as the sample below:

Making Phone call

You may make the phone call by choosing the contact inside the Contacts or dial the number directly. During the Phone call, you may proceed with the function by pressing the button in keypad as below:

Contacts

You can check or edit all the contacts which stored in the phone and SIM cards

To add the new Contact
You may type the phone number directly inside the dial interface, then press “Options” “Add to contacts” To search the contact, you may input the text or number in the lower bar. You may press the “*” for symbol and to switch the “” input method.

To Setup the Speed Dial

Now you may long press there lated key to proceed the Speed Dial.

Call Logs

You can view all the phone call record in this interface.
Advanced settings (Press Options) You can manage the functions as below:

Add to blacklist
The phone number you select will be blocked, which mean that number cannot call or message you anymore To manage the blacklist, Please go to Setting Security->Blacklist
Write Message
Switch to the Message interface, the phone number selected will become the recipient.

Message

You can send or view the received messages inside this interface

Write Message (SMS)
You may send SMS message by following the instruction below:

Go to Messages
Press “Write Message”
Input the recipient/ number at the upper bar
Type the text inside the lower bar (Press Key # to switch the input method)
Press Send after your message is typed

Write Message (MMS)
You may send MMS message by following the instruction below:

Go to Messages
Press “Write Message”
Input the recipient or number directly at the upper bar
Press “Options” “Add” To add the attachment shown as below

Picture: Choose the image stored inside the phone
Take photo: Take a photo for MMS usage
Audio: Choose the audio stored inside the phone
Record: Record an audio for MMS usage
Video: Choose the video stored inside the phone
Shoot Video: Record a Video for MMS usage

Note:
To change the MMS APN Setting, go to Message Setting MMS> MMS account and choose the correct APN

My files

You can access the Phone memory/ SD card inside this interface. Inside “Option”, you can choose to open, search or copy the selected file.

Audio
Use this function to play or set the audio file as the ringtone, the keys will have the function below:

Multimedia

Pictures

You can view, share or edit the images inside the device through this function.
To set the image you want as the wallpaper, press Options Set as Wallpaper

Camera
You can capture pictures or videos by this function. The key will have the function below: plum-MOBILE-RAM-Plus-4G-Mobile-Phone-0

Also you may press the key below for further functions:

To switch Camera/ DV Mode
To adjust the resolution
Setup delay timer
Setup Continuous capture

Video
Use this function to play or share the video file, the keys will have the function below: plum-MOBILE-RAM-Plus-4G-Mobile-Phone-11

FM Radio
This phone supports FM radio, you can use it directly or plug in the earphone for better sound quality. During FM radio, the Arrow key will have the function below:

Inside Options, you can have the following features as below:

Auto search and save
The device will search for the available FM station automatically
Channel List
You may save the specific channel to the list
Save
Save the channel you are listening to the Channel list
Record
To start the recording
Recorder
Use this function you may record the audio files. You may change the file format and storage location inside the option interface.

SOS

You can setup the SOS number and Message in this interface. Long Press the SOS Key to activated SOS Mode Inside the SOS interface, you may adjust the setting as below:

SOS number list
You may enter the phone number inside this interface The phone will dial and send the SOS message to the number inside this list when you activate the SOS mode
SOS message settings
The message which stored here will be send when the SOS Mode is activated
SOS settings
- SOS: To enable/ disable SOS mode
- Once the mode is enable,
- Long press the SOS Key to activated SOS Mode
SOS Ring Alert
During SOS Mode, the SOS alert will play loudly when this option is selected.

Setting

Phone Settings

Time & date
Set time and date, format and Auto update time
Language settings
The phone supports with English, French, Spanish and Portuguese.
Shortcut settings
Customize the shortcut functions of the Up Down, Left and Right direction keys. In the standby interface, you can press a direction key to directly enter the function menu.
Auto Power on/off
set the schedule power on/off time.
Restore factory setting
Use this function to restore factory settings. The initial password is 1234.
Flip to answer
You may enable/ disable the “FIip to answer” function inside interface of Settings- Call setting Flip to answer
Blacklist
Go to Setting SecurityBlacklist You may input the phone number into the list, or you can select the phone number inside the call logs (Options- Add to blacklist) The phone number stored here cannot call or send you message anymore.
Display
Customize the display setting in this interface
Wallpaper setting
To change the wallpaper

Security

This function provides you with related settings about safety use.

PIN
The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by unauthorized people.
Modify PIN
In general, the PIN is supplied with SIM card by the network operator. If PIN check is enabled, you need to input the PIN each time when you power on your mobile phone. The SIM card will be locked if you input wrong PIN code for three times.
Phone locked
Password will be needed when you power on your mobile phone
Modify the cellphone password
To change the phone password in this interface The default password is 1234

Connections

Network accounts
You can edit the APN data for the inserted SIM
Data Service
To enable/ disable the data service
VoLTE
To enable/ disable the VoLTE service

Sounds and Volume

There are some profiles which is available inside your phone, they are: General, Silent, Meeting and Outdoor Long Press the # key to switch the phone into Normal/ Silent/ Meeting mode You can edit the alert type, ring type, ringtones, ring volume or set the button’s volume or the message tone accordingly.

For changing ringtone

Tools

Calendar
Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc.
View schedules
View the select date and you can add the schedule in this interface.
All schedules
You can view all the events you scheduled
Go to date
Jump to the appointed date quickly when you input a date to search.
Clear All
Clear all the schedule

Alarm
You may setup the alarm inside this interface. For each alarm, you may set up the specifi ringtone and the message.
Calculator
This phone supports function of calculator. Using the navigation key as the Add, subtract, multiply and divide and the OK key to proceed the calculation.
Flashlight
Switch on/off the Flashlight here. In addition, when in the idle screen, you can press the Flashlight key to turn on/off the flashlight.

BT

You may connect the phone with other BT devices after you enable this function
BT visibility
Other users can find your phone after this function is on.
Paired Devices
You may connect the saved BT device inside this interface

Internet

In this menu, you can access to internet, enter the URL and you can start to browse the web. Inside Options, you can have the following features as below:

Navigation: To refresh/ stop the website loading
Save: To save the current webpage as bookmark/ homepage
Send connection: Send the current webpage’s URL via SMS
Settings: to adjust the setting of the Internet

Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC.

For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.0 cm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.