Wharfedale Pro WLA-210XF IPX6 Dual 10 Inch Array System Instructions
- October 27, 2023
- Wharfedale Pro
Table of Contents
WLA-210XF
WLA-210XFWLA-210XF IMPORTANT SAFETY INSTRUCTIONS
WLA-210XF IPX6 Dual 10 Inch Array System
For your full PDF User manual, please visit
www.wharfedalepro.com
- READ ALL INSTRUCTIONS – carefully and become familiar with the features and functions of these products before operating them.
- RETAIN THESE INSTRUCTIONS – for future reference.
- COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to.
- USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable to establish and follow a routine for powering up and powering down a sound system. With all system components connected, turn on source equipment (mixers, signal processors, record and playback units, etc.) BEFORE powering up amplifiers. Transient voltages from powering up source equipment can damage speakers if amplifiers are already turned on. Make sure that amplifier volumes are set to their minimum settings and power up any system amplifiers LAST. It is recommended that all system components be allowed to stabilize for several seconds before any source signals are introduced or level setting adjustments are made. Similarly, when shutting systems down, turn all amplifiers off first, before powering down any other system components.
- CABLES – Do not use shielded or microphone cables for connection between amplifiers and speakers. Use only approved speaker cables with proper connectors.
- CAUTION – Professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid exposure to excessive volume levels. Permanent hearing damage can result when operated to extreme levels.
- SERVICE – There are no user serviceable parts inside this product. Users should not attempt to service this product. Warranty nullification could result if this is attempted.
- RIGGING – SUSPENDING – MOUNTING – Rigging suspending or mounting of speaker systems can expose members of the public to serious health risks and even death.
UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THESE SPEAKERS UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE.
WHARFEDALE PRO LIMITED WARRANTY
Wharfedale Pro products are warranted of manufacturing or material defects for a period of three years from the original date of purchase. In the event of malfunction, contact your authorised Wharfedale Pro dealer or distributor for information. Please be aware that the warranty details may differ from country to country. Contact your dealer or distributor for information (available at www.wharfedalepro.com). These terms do not infringe your statutory rights.
- Dual 10 ” Passive line array
- IPX6 Waterproof Certification
- Wax wrapped components
- Anti-corrosion stainless steel hardware
- Waterproof input connectors
- System Continuous Power LF: 800 W HF: 90 W
- System Programmed Power LF: 1600 W HF: 180 W
- System Peak Power LF: 3200 W HF: 360 W
- Impedance 16 Ω
- 15 mm / 18 mm Plywood construction / 3.0 mm Aluminums
OVERVIEW
For your full PDF User manual, please visit www.wharfedalepro.com
| 
---|---
SPECIFICATIONS
| Model Name | WLA-21OXF |
|---|---|
| System Type | Passive IPX6 waterproof |
| Configuration | Two-way 2 x 10″ |
| Frequency Response (+/-3 dB) | 65 Hz – 20 KHz |
| Frequency Range (-10 dB) | 60 Hz – 20 KHz |
| Sensitivity (2.83 v / 1 m) | 102 dB |
| Calculated Maximum SPL @1 m | 138 dB |
| System Rated Impedance | 160 |
| Low Frequency Transducer | |
| Size | 2 x260 mm/2×10″ |
| Voice Coil Size | 65 mm / 2.5″ |
| Rated Impedance | 2 x 8 0 |
| LF Power (re:AES2-2012) | 2 x 400 W |
| High Frequency Transducer | |
| HF Driver Type | Compression Driver – Neo |
| Voice Coil Size | 75 mm / 3.0″ |
| Exit Size | 35.6 mm / 1.4″ |
| Diaphragm Material | Titanium |
| Rated Impedance | 80 |
| HF Power (re:AES2-2012) | 90 W |
| Nominal Coverage (H x V) | 100° x 10° |
| Power | |
| System Continuous Power | LF:800 W HF:90 W |
| System Programme Power | LF:1600 W HF:180 W |
| System Peak Power | LF:3200 W HF:360 W |
| Crossover frequency | 1.5 KHz |
| Operational Modes: | No |
| Input Connector | 2 x WY-24K4Z (waterproof) |
| Hardware | Integral side plate adjustable rigging 0°-10° |
| Enclosure Material | 15 mm,18 mm Plywood 3.0 mm Aluminium |
| Finish | Waterproof Black Paint |
| Grille Material & Finish | 3.0 mm Black Aluminium |
| Dimensions – (Unpacked) | |
| Height Front / Height Rear | 333.3 mm / 13.1″ 256.3 mm / 10.0′ |
| Width Front | 845 mm / 33.3″ |
| Width Rear | 845 mm / 33.3″ |
| Depth | 443 mm / 17.4″ |
| Dimensions – (Packed) | |
| Height | 953 mm / 37.5″ |
| Width Front | 424 ram / 16.7″ |
| Width Rear | 424 mm / 16.7″ |
| Depth | 513 mm / 20.2″ |
| Weight | |
| Net Weight (kg / Ibs) | 46.0 kg / 101.2 lbs |
| Gross Weight (kg / Ibs) | _ 50.0 kg / 110.0 lbs |
Wharfedale Pro also manufacture a wide range of power amplifiers and signal processors. For recommended accessories, amplifiers and system diagrams please visit www.wharfedalepro.com
WHARFEDALE PROFESSIONAL
IAG House, 13/14 Glebe Road, Huntingdon, Cambridge shire, PE29 7DL, UK
www.wharfedalepro.com
Wharfedale Professional reserves the right to alter or improve specications
without notice.
All rights reserved © 2022 Wharfedale Pro. Wharfedale Pro is a member of the
IAG Group.
May 2022
Documents / Resources
|
Wharfedale Pro WLA-210XF IPX6 Dual 10 Inch Array
System
[pdf] Instructions
WLA-210XF, IPX6 Dual 10 Inch Array System, WLA-210XF IPX6 Dual 10 Inch Array
System, Dual 10 Inch Array System, 10 Inch Array System, Array System
---|---