Wharfedale Pro Titan Sub A12 1×12 Inch 250W Powered Subwoofer User Guide
- October 27, 2023
- Wharfedale Pro
Table of Contents
Wharfedale Pro Titan Sub A12 1×12 Inch 250W Powered Subwoofer
SPECIFICATIONS
| Model Name | Titan Sub A12 |
|---|---|
| System Type | Active 12″ Reflex Subwoofer |
| Frequency Response (+/-3 dB) | 55 Hz-200 Hz |
| Frequency Range (-10 dB) | 50 Hz-200 Hz |
| Calculated Maximum SPL @1 m | 127 dB |
| LF Transducer Size (mm / inches) | 305 mm / 12” |
| Coil Size (mm / inches) | 64.26 mm / 2.5″ |
Ampli fi ers
Low-Frequency Power Amplifier
RMS/Peak Watts
| 250/500 W (Class D)
Controls—EQ| Crossover filter : 80 Hz – 200 Hz
(adjustable)
DSP|
Hi Pass switch| 150 Hz
Amplifier Protection / Thermal protection| Yes
Low Line Voltage Shut Down| 60% Nominal line voltage
Driver Protection| Independent LF limiters
DC Protection / Short Protection| Yes
Clip Limiter| Tums on ~250 W output
Limiter Indicator / Power Indicator| Red LED / Green LED
Connectors
Input – type| 0 / 180° phase switch
Input Connector| 2 XLR 1/4″ Combo Jack
Line Output Connector| Hi Pass out : 2 Balanced XLR
AC Power Supply| SMPS
AC Power Options| AC100-120 V~/220-240 V~,50/60 Hz
Hardware
Rigging / Bracket / Mounting Options| 35 mm socket
| 2 carry handles (one on each side)
LED Horn lighting (On/Off switch)| No
Enclosure Material and finish| 15 mm MDF
Colour Options| Grey / Black
Grille Material & Finish| 1.2 mm steel
Dimensions – Unpacked – Height| 360 mm / 14.2”
Width Front| 493 mm / 19.4”
Depth| 431 mm / 16.9”
Dimensions – packed – Height| 440 mm / 17.3”
Width Front| 560 mm / 22.0”
Depth| 440 mm / 17.3”
Net Weight (kg / lbs)| 22.31 kg / 49.0 lbs
Gross Weight (kg / lbs)| 26.26 kg / 57.8 lbs
OVERVIEW
Titan Sub A12 REAR PANEL FEATURES
| 1. HEAT SINK | Cooling fins for amplifier. Do not obstruct. |
|---|---|
| 2. VOLUME CONTROL | Adjusts the volume |
| 3. INPUT L | Balanced line level input via a XLR / ¼” combo connector. |
| 4. INPUT R | Balanced line level input via a XLR / ¼” combo connector. |
| 5. OUTPUT R | Balanced XLR pin connector provides output HIGH PASS |
signal.
6. OUTPUT L| Balanced XLR pin connector provides output HIGH PASS
signal.
7. POWER SOCKET| This is the connection for the IEC AC power connector.
8. LIMIT LED
POWER LED| LED indicator illuminates when the signal limiting function
is activated.
LED indicator illuminates when the unit is powered up.
9. POWER SWITCH| Turns the power on and off to the subwoofer amplifier
module.
10. PHASE SWITCH| Selects the polarity of the signal being sent to the
subwoofer. 0° selects the signal polarity as it appears at the input. The 180°
selection inverts the polarity of the signal.
11. CROSSOVER FREQUENCY CONTROL| Adjustable 80 Hz / 100 Hz / 120 Hz /
150 Hz / 180 Hz / 200 Hz.
WHARFEDALE PRO LIMITED WARRANTY
Wharfedale Pro products are warranted of manufacturing or material defects for a period of three years from the original date of purchase. In the event of malfunction, contact your authorised Wharfedale Pro dealer or distributor for information. Please be aware that the warranty details may differ from country to country. Contact your dealer or distributor for information (available at www.wharfedalepro.com). These terms do not infringe your statutory rights.
WHARFEDALE PROFESSIONAL
IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK
www.wharfedalepro.com
Wharfedale Professional reserves the right to alter or improve specifications
without notice. All rights reserved © 2022 Wharfedale Pro. Wharfedale Pro is a
member of the IAG Group.
