MEARI Mini 19S Outdoor Wireless Security Camera System User Guide
- June 6, 2024
- MEARI
Table of Contents
Mini 19S
ORIGINALITY DESIGN SMART – AND BEAUTIFUL
QUICK GUIDE
CAMERA
What’s in the box
Please consult this checklist for all parts.
Description
Power DC 5V/1A
Status light
- Blinking red light: wait for network connection (slow) connecting the network (fast)
- Solid blue light on: camera is working correctly
- Solid red light on: camera is malfunctional
Microphone Capture sound for your video
SD card slot Support local SD Card storage (Max.128G)
Reset Press and hold for 5 seconds with pin to reset the camera (if you have
modified settings, they will return to the factory defaults)
Installation
-
Stick the adhesive tape in the middle of the camera bottom.
-
Put the camera on the clean plane.
Connection
Download
CloudEdge is available for both iOS and Android OS. Search the name
‘CloudEdge’in App Store or Google Play, or scan the QR-Code to download the
App.
Support
|
http://a.app.qq.com/o/simple.jsp?pkgname=com.cloudedge.smarteye&fromcase=40003
---|---
| https://play.google.com/store/apps/details?id=com.cloudedge.smarteye
Download App(IOS&android)
Add device
Log in to the CloudEdge, select “Add Device”, and add the smart camera to the
App according to the screen tips(Make the smart camera close to the router
when configuring).
NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still on the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Support smart motion detection. The camera will detect movements, and then
send you to push notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud
storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>