MEARI Speed 2S Bullet Camera User Guide
- June 6, 2024
- MEARI
Table of Contents
Speed 2S
ORIGINALITY DESIGN SMART AND BEAUTIFUL
QUICK GUIDE
What’s in the box
Consult the checklist below for all components.
Description
| Power | DC12V -± 10% |
|---|---|
| Status light | • Red light solids on the camera network is abnormal |
• Blinking red light: awaiting WiFi connection (faster blinking)
• Blue light solids on camera running correctly
• Blinking blue light: currently connecting (faster blinking)
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (build-in SD Card)
Reset| Press and hold for 5 seconds with a pin to reset the camera (if you
have modified settings, they will return to factory defaults)
Install
- Ceiling type
- Take the metallic components apart from the bracket.
- Fix the bracket on the ceiling with screws
- Rotate the camera to snap into the bracket.
- Wall mounting type
- Fix the bracket on the wall with screws shown in the picture.
- Rotate the camera to snap into brackets.
Connect
Download
Smart Life is available for both iOS and Android OS. Research the name ‘Smart
Life’s App Store or Android Market, or scan the OR-Code to download the App.
- Support
|
http://e.tuya.com/smartlife
Dowoload App (IOS & android)
---|---
Set up router
This device only supports a 2.4GHz frequency band router, does not support a 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration, WiFi passwords do not include special characters such as -!@#$°/cr&*( ). When the device is configured in WiFi, the mobile phone and device are as close as to the router, which can speed up the configuration of the device.
Registration process
Step 1 Open the Smart Life App, click “Register”, read the “Privacy Policy” and click “Agree”
Step 2 input a legal and valid Mobile number or Email address and click “Continue”. Input Verification Code, then log in to the app.
OR Code Configuration
Getting started
- Please follow the instructions and make sure the passwords are input correctly.
- One device can only be added with one App account, if the device has been added with another account already, then it can’t be added to any other account again.
- The device will be unbound from the previous account after being deleted from App. Further, the device will be reset automatically once from blue light to red light.
Process
Step 1 Open the Smart Life App, click “+” or “Add Device”. Then select
“All” on the “Select Device Type’ page.
Step 2 Select “Security Camera”. Power the device on and make sure the indicator is flashing quickly or a prompt tone is heard.
Step 3 Input WiFi passwords and click “Confirm”, scan the OR Code with a device. (You can change the network connection)
Step 4 Click “I heard the beep” when the device comes out “dong dong dong”. And you can complete the configuration in about 30s.
Step 5 The device is added, and the device nickname can also be changed in this interface.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to
the router, and if not, it is recommended to reset the device and add it
again.
Q: Why is it still on the list of devices after resetting?
A: The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm
whether the SD card is normally available and the format is FAT32. And the TF
card can’t be identified when the internet environment is not good.
Q: Why I can’t get notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360
degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you to push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage.
Daytime & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
FCC Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.