EXTECH TP200 Type K Pipe Clamp Temperature Probe User Manual
- June 4, 2024
- EXTECH
Table of Contents
- [EXTECH TP200 Type K Pipe Clamp Temperature Probe
- Operating instructions
- Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EXTECH TP200 Type K Pipe Clamp Temperature Probe[
](https://manuals.plus/wp-content/uploads/2022/08/EXTECH-
TP200-Type-K-Pipe-Clamp-Temperature-Probe-product.png)
Operating instructions
- Using the Type K sub-miniature thermocouple connector, plug the TP200 in to a compatible Type K measuring instrument.
- Turn on the measuring instrument and select the appropriate range.
- Read the temperature on the measuring instrument When no heat or cold is applied to the thermocouple element, the measuring instrument should display the ambient (room) temperature.
- Squeeze the spring-loaded handles to open the clamp jaws.
- Securely clamp the probe jaws around the pipe to be measured.
- Read the temperature.
Note : For best results, the surface area should be free of any dirt or substance that will inhibit thermal contact.
Specifications
-
Temperature Range
-20 to 93°C (-4 to 200°F) -
Sensor Type
Type K curved thermocouple element -
Accuracy
+/-1.8°C (3.6°F) -
Pipe size
0.25″ (6.35mm) to 1.5″ (38mm) diameter -
Cable length
36″ (0.9m)
Copyright 2022 FLIR Systems Inc.
All rights reserved including the right of reproduction in whole or in part in
any form IsO-9001 Certified
www.extech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>