ambie AM-TW01 Earcuffs User Manual
- June 6, 2024
- ambie
Table of Contents
sound earcuffs
ambie | sound earcuffs | AM-TW01
Bluetooth® Wordmarks and logos Bluetooth SIG, inc.
Is a registered trademark of.
Qualcomm aptX Qualcomm Technologies International, Ltd.
Qualcomm Qualcomm Incorporated
Qualcomm
Technologies International, Ltd.
Bluetooth® Bluetooth SIG, Inc.Qualcomm aptX
Qualcomm Technologies International, Ltd. Qualcomm Qualcomm
Incorporated aptX Qualcomm
Technologies International, Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by
Blu e t o o t h SIG, Inc . Qualcomm maptXisaproductof Qualcomm
Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of u
Qualcomm Incorporated, registered in the United State and other countries.
aptX is a trademark of Qualcomm Technologies International, Ltd., registered
in the United States and other countries.
For the customers in the USA.
User Manual Information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause arm interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that is deemed to
comply without maximum permissive exposure evaluation (MPE).
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Suppliers Declaration of Conformity
Trade Name: ambie
Model: AM-TW01
Responsible Party: ambie corporation
Address: Toranomon Hills Business Tower 4f WiL office.
FCC: 2AOO9-AMTW01
IC: 23447-AMTW01
Frequency frequency：2400-2483.5MHz
Power: ≤ 20dBm（EIRP)
Ver. 1.01 2021.Aug
Free repair policy
-
If the product breaks down within the warranty period under normal use, we will repair it free of charge according to this manual. This manual cannot be reissued, so please keep it in a safe place.
Type: Bring-in repair, reception desk: The store where you purchased the product, presentation of warranty card: Presented when requesting product repair -
Even if the product fails within the warranty period, you will be charged for the following cases.
①If this document is not presented
②When the purchase date and customer name of this manual are rewritten
③If the purchase date cannot be confirmed
④ Departs during the warranty period When a repair request is made after the warranty period has expired for a malfunction that has occurred.
⑤ Failure/damage due to user error (including cases where normal use is not performed in accordance with the precautionary statements in the instruction manual, etc.) ⑥ Failure/damage caused by failure, improper repair, or modification received from other equipment
⑦ When repaired or modified by a store other than those listed in this manual (including individual customers)
⑧Failure / damage due to relocation, transport station, dropping, etc. after purchase
⑨ Failure/damage due to fire, earthquake, wind and flood damage, lightning strikes and other natural disasters, pollution, salt damage, abnormal voltage, etc.
⑩Failure / damage due to use other than general household use such as business use
⑪Replacement of worn/worn parts, replacement of dirty parts
⑫When the size of this product becomes incompatible due to deformation of the ear -
Depending on the failure situation and other circumstances, the product may be replaced instead of repaired.
-
Remanufactured parts and replacement parts may be used for repairs. In addition, we will voluntarily collect the parts replaced by repair and dispose of them appropriately.
-
The warranty period at the time of initial purchase applies to products that have been repaired or replaced free of charge based on this manual.
-
We will not compensate for damage caused by the inability to use this product due to a malfunction.
-
This warranty is valid only in Japan.
Warranty
If a failure occurs within one year from the date of purchase, please fill in
the customer column and request repair. We will repair it free of charge based
on the contents on the left. (For support such as replacement and repair,
proof of purchase date is required by receipt or receipt)
| Warranty period | 1 year from the date of purchase |
|---|---|
| Model | AM–TWO’ |
| Purchase date | Rewa Year |
| Sales outlet | |
| customer | name address |
Please check the ambie homepage for support information.
-
App installation
https://ambie.co.jp/app/
With the ambie app, you can know the detailed operation method, adjust the sound with the equalizer, and set the button operation.
Scan the QR code above or search for “ambie” in each app store and install it. -
-
ambieHow to attach
Hold your
ears with one hand and hold the ambie like an ear cuff. First, put it on the
upper part of your ear and lower it to a position where you can hear it well.
※For ambie, the smaller one is in the front and the larger one in the back. Please do not confuse the front and back. -
Position and how to press the operation button
The operation buttons are on the backside of each of the left and
right. You can perform basic operations with the click of a button. You can
also change the button settings from the app. * It is not a touch operation.
You need to push the button in. -
Operation list
※You can check more detailed usage from the app.
♪: Voice guidancePairing| When you open the case, either the left or right flashes and the pairing mode starts.(♪) Pairing
---|---
Power ON/OFF| Automatic on to open the case Automatic on to close the case (flower ON / Power OFF )
Music: Play / Stop Call: Answer / Hang UP| 1 click on either the left or right button
To the previous song To the next song| 2 cock the left button
2 cid< the rizfit buttcn
Volume+
Volume-| Press and hold right for 1 second to go up. Pup sound at max Press and hold left for 1 second to go up. Pup sound with min
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in
conjunction with any other antenna or transmitter.
IC
The licensed transmitter/receiver contained in this device is compliant with
Innovation, Science, and Economic Development Canada’s RNC for licensed radio
devices.The operation is permitted under two conditions:
- The device must not cause interference;
- The device must accept any radio interference, even if the interference is likely to compromise its operation.
RF exhibition statement:
The equipment complies with the IC radiation exposure limit established for an uncontrolled environment. This equipment must be installed and used without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>