CALEX 4611913 Up and Down Wand Lamp Installation Guide
- July 29, 2024
- CALEX
Table of Contents
CALEX 4611913 Up and Down Wand Lamp
Product Information
- Brand: Calex
- Company: Electro Cirkel Retail B.V.
- Address: Lyonstraat 29, 3047 AJ Rotterdam, The Netherlands
- Website: www.calex.eu
- Article Number: 4301000800
Parts Supplied
- 1 x Light Fixture
- 2 x Wall Plugs
- 2 x Screws
Installation Instructions
- Turn off the power supply from the main switch.
- Remove the screw from the light fixture and detach the mounting plate.
- Mark the positions for drilling holes on the wall.
- Drill holes (6mm diameter) at the marked positions and insert the wall plugs.
- Connect the wires to the terminal block. Blue wire to ‘N’ and Brown wire to ‘L’.
- Attach the mounting plate to the wall using the screws provided.
- Secure the light fixture to the mounting plate using the screw removed earlier.
- Insert the GU10 bulb (max 2x35W) into the light fixture.
- Secure the cover of the light fixture with the screw.
- The light fixture should now be securely attached to the wall.
- Turn on the power supply from the main switch.
Specifications
| Parameter | Details |
|---|---|
| Bulb Type | GU10 |
| Maximum Wattage | 2x35W |
| Drill Hole Diameter | 6mm |
FAQ
What is the maximum wattage for the bulbs?
The maximum wattage for the bulbs is 2x35W.
What size drill bit should I use for the wall plugs?
You should use a 6mm diameter drill bit for the wall plugs.
How do I connect the wires to the terminal block?
Connect the blue wire to the 'N' terminal and the brown wire to the 'L' terminal.
Is it necessary to turn off the power supply before installation?
Yes, it is necessary to turn off the power supply from the main switch before starting the installation.
What type of bulb is compatible with this light fixture?
This light fixture is compatible with GU10 bulbs.
Electro Cirkel Retail B.V.
Lyonstraat 29, 3047 AJ Rotterdam, The Netherlands
WWW.CALEX.EU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>