CARSON 500409077 1:8 Adventure Crawler Pro Instruction Manual

CARSON 500409077 1:8 Adventure Crawler Pro

Product Information

The Crawler 1:8 2.4 GHz is a fully assembled and ready-to-run model of an off- road vehicle. It comes with a 775 brushed motor, distribution gearbox servo, electronic speed controller, front and rear servo/differential locks, and a rechargeable battery. The model can be controlled using a 2.4 GHz remote control that has six channels and an LCD display. The remote control allows you to adjust the steering, throttle, and shifting between two-speed modes, as well as selecting between three different driving modes: all-wheel drive, front-wheel drive, or rear-wheel drive.

Product Usage Instructions

Before using your Crawler 1:8 2.4 GHz for the first time, make sure to read the manual and check that it is fully up-to-date. To ensure safe and correct operation, follow these instructions:

1. Remove the body of the vehicle by releasing the clips. This will allow access to the battery compartment.
2. Insert the battery into the compartment, making sure to connect it properly.
3. Turn on the remote control by flipping the switch to ON. The LED display should light up.
4. Turn on the vehicle by flipping the switch located under the body of the vehicle to ON. The LED indicator on the electronic speed controller should light up.
5. Use the remote control to steer the vehicle left or right. The steering is controlled by channel 1.
6. Use the throttle to control the speed of the vehicle. The throttle is controlled by channel 2.
7. Use channel 3 to shift between two-speed modes: slow and fast. The corresponding lever and servo status display the current gear.
8. Use channel 4 to switch between the three driving modes: all-wheel drive, front-wheel drive, or rear-wheel drive. The driving mode should be selected based on the terrain.

Always use original spare parts and ensure that all connections are tight and secure. Do not use the vehicle as a toy and always pay attention to the battery level of the remote control.

For more detailed information on remote control functions, refer to the separate remote control manual.

Important information
Before using your product for the first time or ordering any spare parts, check that your manual is fully up-to-date. This manual contains the technical appendices, important instructions for correct start-up and use and product information, all fully up-to-date before going to press. The contents of this manual and the technical data of the product can change without prior notice. For the latest version of your manual, see: www.carson- modelsport.com

Dear Customer
We congratulate you for buying this CARSON product, which is designed and manufactured using state of the art technology.
According to our policy of continued development and product improvement we reserve the right to make changes in specifications regarding equipment, material and design at any time without notice. Specifications or designs of the actual product may vary from those shown in this manual or on the box.
The manual forms part of this product. Should you ignore the operating and safety instructions, the warranty will be void.
Keep this guide for future reference.

Limited Warranty
This product is warranted by CARSON against manufacturing defects in materials and workmanship under normal use for 24 months from the date of purchase from authorised franchisees and dealers. In the event of a product defect during the warranty period, return the product along with your receipt as proof of purchase to any CARSON store.
CARSON will, at its option, unless otherwise provided by law:

• Correct the defect by repairing the product without charging for parts and labour;
• Replace the product with one of the same or similar design.

All replacement parts and products, and products on which a refund is made, become the property of CARSON. New or reconditioned parts and products may be used in the performance of warranty services.
Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

The Warranty does not cover:

• Damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration,
• lightning or other incidence of excess voltage or current;
• Damage caused by losing control of your model;
• Any repairs other than those provided by a CARSON authorized service facility;
• Consumables such as fuses or batteries;
• Cosmetic damage;
• Transportation, shipping or insurance costs; or
• Costs of product removal, installation, set-up service adjustment or reinstallation;
• Any changes to plugs and cables, open the housing and damage the sticker.

This warranty gives you specific legal rights, and you may also have other rights which may vary according to the country of purchase.

Declaration of conformity: TAMIYA-CARSON Modellbau GmbH & Co. KG hereby declares that the radio equipment type 500409077 / 500409078 / 500409079 conforms to Directive 2014/53/EU. The complete text for the EU declaration of conformity is available at the following Internet address.
www.carson-modelsport.com/de/produkte.htm
The meaning of the symbol on the product, packaging or instructions. Electrical appliances are valuable products and should not be thrown in the dust bin when they reach the end of their serviceable life! Help us to protect the environment and conserve resources and bring this device to a corresponding disposal point/dealer free of charge. For disposal-related queries, contact the organization responsible for waste disposal or your specialist retailer. The end user is responsible for deleting personal data on old devices.

SCOPE OF DELIVERY

• Model with 2.4 GHz RC system (max. transmitter power 10 mW)
• Transmitter operating voltage: 4.8-6 V ( 4×1.5 V AA /LR 06 )
• Vehicle operating voltage: 7.4V – 14.8V (2S – 4S)

Function:

• Move forwards/backwards
• Steering left/right
• Extra functions

SAFETY PRECAUTIONS

Safety Instructions and Intended Use
This product is designed exclusively for hobby use and may only be used on tracks and areas intended for this purpose. No persons or animals may be transported with this model. To avoid operator errors, it is mandatory that the user manual is read before use! These models may only be used with bodywork that is correctly fitted. When removing the bodywork, please note that, during operation, certain parts can become very hot. Please note that various models can generate very high noise levels and should, therefore, not be operated in your immediate proximity. Please make sure, before every driving session, that the tank is correctly closed or the power pack is correctly inserted. To avoid faulty operation of the control system causing the model to run out of control, it must be checked that the transmitter and model batteries are in good condition. It is essential to check that the model is correctly assembled both before and after use; if need be, tighten nuts and bolts.

This model is not a toy!

• This product is not a toy, its operation must be learned step by step.
• Children under 14 years of age should operate the model only if supervised by an adult.

Operating RC models is a fascinating hobby that, however, must only be exercised with proper precautions and care. Since the weight of this model is considerable and it can reach a very high speed it can, if it runs out of control, cause significant damage and injury for which you, as the operator, are liable.
Only a correctly assembled model will work and react as expected.
Never improvise with unsuitable materials but, when the need arises, use only original spare parts. Even if the model is pre-assembled, all joints and fastenings should be checked for correct seating and tightness.

Before use, you must make sure of the following points:

• All rechargeable batteries must be fully charged.
• Before starting, check the radio range.
• Check that the model reacts correctly to the control signals.
• All functional parts of the product are in a faultless condition and have been checked.
• All screw fastenings are firmly seated.
• Do not drive under high-voltage power lines or radio masts or with nearby thunderstorms!
• Atmospheric interference can influence the operation of your model.
• The electrical parts of the model are not water-tight. Do not, therefore, drive it in rain or snow or through puddles or wet grass.
• The remote controlled model may be driven only on suitable areas and must not be used on the public highway.
• Do not use near people or animals!
• Do not use it when tired or if your reactions are otherwise impaired.
• Always maintain direct visual contact with your model.
• Regular maintenance and care are required for firt class driving performance.
• The model has parts that become hot in operation, e.g. the top of the motor, the metal gearbox, amongst many others. Touching these parts during operation can cause injury.

Pay attention to the charge level indication on your transmitter.

• With power packs or batteries that are half discharged, you can lose control of the model.
• In the transmitter, never mix fully charged batteries, rechargeable or not, with half discharged batteries or rechargeable batteries of different capacity.
• Never try to charge non-rechargeable batteries (dry cells), only batteries specified as rechargeable can be charged.

CHASSIS

RECEIVER PORT

• CH1: Steering Servo
• CH2: Brushed ESC
• CH3: 2WD/4WD Shifting
• CH4: 2 Speed Shifting Servo
• CH5: Front Diff Lock Servo
• CH6: Rear Diff Lock Servo

REMOVING THE BODY

• Remove hook pin, Remove the body ( Ford 150 Version only )
  

• Loosen magnets, Remove the body
  

INSERTING THE DRIVE BATTERY

1. Remove the body
2. Insert the battery.

Advice

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any damage to their cord, plug, enclosure and other parts.

TURN ON THE RC SYSTEM

CAUTION!
Always turn the transmitter´s power switch ON first!

1. Insert the batteries
2. Put the battery plate on it and
3. Fix it with the battery holder

HOW TO CONTROL YOUR MODEL

• Raise the tyres off the ground
• Turn the steering wheel to the right and left as far as it will go. The wheels are to follow the steering direction.
• If the wheels operate in the opposite direction, operate the servo Reverse switch (ST in position REV).
• To regulate the driving speed, actuate the throttle/brake
  • backwards (forward driving, accelerating) or
  •  forwards (reversing)

REMOTE CONTROL FUNCTIONS

You can find a detailed description of the functions in the separate instructions for the remote control.

Speed Control
The electronic speed controller (ESC) that comes with your model is a very powerful electronic device.
Please follow these precautions carefully to prevent damage to the speed controller or other components.

1. Battery operation: Always disconnect the rechargeable battery from the speed controller (ESC) when it is not in use.
2. Always adhere to the maximum and minimum limits of the speed controller as shown below. Voltage range: LiPo cells: 2-4S ( 7.4-14.8V)
3. Switch on the remote control first: Switch on the remote control before turning on the speed controller to prevent the model from moving unintentionally or in uncontrolled manner.
4. No reverse polarity protection: The ESC is not protected against reverse polarity. (Ensure that it is connected with the correct polarity.)

Driving your model
Before continuing, pay attention to the following important precautions.

1. Leave the model to cool down for a few minutes at regular intervals. This is especially important when using battery packs with a high capacity that enable longer operating times. Monitoring the temperature prolongs the lifespan of the batteries and the motor.
2. Switching the gears:
   1st gear: For maximum torque, drive the vehicle primarily in the lower gear.
   2nd gear: The higher gear can be used for faster speeds. Only use this gear in open surroundings with sufficient space. However, please note that continuous use can cause the motor/ESC to overheat. This can lead to premature wear of the motor.

Operating the High-Low Transmission:

Use the “CH3/Channel 3” button on the remote control to switch between the 1st (slow) and 2nd (fast) gear. (Note the different speeds!) The gear lever and servo status indicates the corresponding gear. (See fig.)

Operating the Transfer Case

1. CH4 / Channel 4 on remote control: Switches between the 3 driving modes.
   • 4WD (all-wheel drive)
   • FWD (front wheel drive)
   • RWD (rear wheel drive)
   • Choose a driving mode that is appropriate for the type of terrain.
2. If a new servo is installed, please pay attention to the following diagrams. Configure the servo parameters according to the status shown in the diagram. Ensure that no continuous force is exerted on the servo, as this may cause damage to the servo.

Operating the Differenzial lock

1. The crawler’s front and rear differential lock is controlled via channel 5 (“CH 5”) and channel 6 (“CH 6”) on the remote control.
2. In most driving scenarios, the differential can be locked or unlocked at any time. If the difference in speed between the left and right tyres is too great, release the throttle to reduce the difference in speed, and then lock the differential. In most cases, the crawler functions best when the front and rear differentials are unlocked. This ensures optimal handling performance  and the smallest steering radius while reducing the pressure on the drive components. If the crawler loses its traction on loose terrain when the differential is unlocked, it is recommended to lock the differential.
3. Please note that the vehicle is more difficult to control at higher speeds when the differential is locked. This is most apparent when driving around bends.

Run Time
The type and condition of the batteries has a significant impact on the driving time. The rated power of the batteries in milliampere-hours (mAh) determines the size of your “fuel tank”. In theory, a 3000 mAh battery pack lasts for twice as long as a 1500 mAh battery pack. Due to the wide range of available battery types and charging methods, it is not possible to provide precise  driving times for the model. The way in which the model is driven also significantly affects the driving time. The driving time may be shorter if the model is repeatedly stopped and then accelerated to the maximum speed.

Tips for Increasing Run Time

1. Use batteries with a higher capacity.
2. Use a premium charger labelled with “Delta Peak”.
3. Read and follow all maintenance and care instructions from the manufacturer, your batteries and your chargers.
4. Keep the speed controller cool. Ensure that there is a sufficient flow of air above the speed controller’s heat sink.
5. Handle your model with care. Do not allow dirt or damaged parts to become trapped in the drive train. Keep the motor clean.

Precautions

1. Without proper care, some parts of the model may be seriously damaged if they come into contact with water. Please note that additional maintenance work is required after driving in wet conditions in order to maintain the performance of your model. If you are not prepared to carry out additional care and maintenance work, do not drive the model in wet conditions.
2. The remote control is not waterproof. Do not expose it to wet conditions such as rain.
3. Do not operate the model during heavy rain, storms or other adverse weather conditions.

Motor Precautions
The motor lifespan can be significantly reduced by mud and water.
If the motor gets excessively wet or is submerged in water, reduce the speed immediately and allow the excess water to drain off. Applying full throttle when the motor is filled with water can quickly lead to motor failure. Your driving habits determine the lifespan of the motor. Never attempt to deliberately submerge the motor under water.

Additional Maintenance
Increase the frequency with which you disassemble, inspect and lubricate the necessary parts. This is necessary after prolonged use in wet conditions, or if the vehicle is not used for an extended period (e.g. one week or longer). This additional maintenance is required to prevent corrosion of certain parts due to trapped moisture.

TROUBLESHOOTING

Other important information:
Detailed assembly instructions and an overview of spare parts can be found at: www.carson-modelsport.com (500409077,78,79)

charge them
Doesn´t run straight| Steering trim is not adjusted correctly| Make adjustment
Front and rear wheel nuts are too lose| Tighten wheel nuts
Doesn´t stop| Throttle trim is not adjusted correctly| Make adjustment
Doesn´t reverse| Throttle trim is not adjusted correctly| Make adjustment
Wrong action| Control properly
Running too slowly| Batteries have run down| Change batteries or charge them
Motor has lost power| Change to spare motor
Rear wheel nuts are too lose| Tighten wheel nuts
Dust or foreign objects are inside gears| Turn the power switch ”OFF“ and clean out gears

TAMIYA-CARSON
Modellbau GmbH & Co. KG
Werkstraße 1 // D-90765 Fürth // www.carson-modelsport.com

+49 3675 7333 343
Service-Hotline for Germany: Mo – Do 8 -12 Uhr & 12.30 -16 Uhr // Fr 8 -12.30 Uhr CARSON-Model Sport // Abt. Service // Mittlere Motsch 9 // 96515 Sonneberg

References

• Games for kids & adults | Official Carson Shop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>