ALTECH IMW1200 HydraJolt Everythingproof Wireless Speaker User Guide
- June 6, 2024
- ALTECH
Table of Contents
IMPORTANT
PLEASE 1M DO NOT RETURN TO STORE
If Verne Having Trouble. We’re Here to Help!
Call us 2417 at 1.855-2924087
E-mail us at supportttalteclansing.com or
visit us at Altec Lansing.com
REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or firmware updates, warranty
information, and more please register your product at
alteclansingsupport.com
12 Month Limited Warranty
All Altec Lansing products come with a 12-month limited warranty from the date
of its original purchase
24 Hour Customer Support
We love our customers, and we care about your experience with Altec Lansing.
If you need assistance, please call us at 1.855.292.4087 or e-mail
supporttzalteclansing.com
www.alteclansing.com
In the Box
IMW1200 HydraJolt Everythingproof Wireless Speaker TM|
---|---
USB-C Charging Cable|
Carabiner|
A Closer Look
Charging
Powering On/Bluetooth Pairing
Speaker Controls
PRESS
+Volume Up
-Volume Down
Play/Pause
Answer & End Call| PRESS & HOLD (2 sec)
ON/OFF
+Next Track
-Previous Track
Reject Incoming Call
---|---
True Wireless Pairing
Turn on the first speaker and connect It with a Bluetooth-compatible device. urn on the second speaker and press the button on that speaker.
Press and hold the button for 2-3 seconds on the first speaker. The first
speaker will now connect to the second so they both play in sync. The Link
Buttons will illuminate green. To end TWS press & hold the power button on the
speaker. There are two modes:
Mode 1: Dual Stereo, both play stereo for parties, etc. Mode 2: Wide Stereo,
one plays left and the other right. Briefly presses the button to switch
between the modes.
Voice Assistant /Reset
Press
To activate Voice Assistant (Siri or Google Assistant)
Reset- Press & Hold
Disconnect Bluetooth: Press and hold for five seconds and the speaker will beep
Reset All connections: Press and hold for ten seconds and the speaker will
power off
Overall battery performance varies depending upon use setting and
environmental conditions. For further information, please visit
www.alteclansing.com
Light Change Mode To toggle between the different light modes:
1. Multicolor slow transition
2. Single color pulse to music
3. Multicolor pulse to music
4. Single color slow fade
5. Single color
6. Multicolor cycle changed| 7. Multicolor fast changed with background-
color
8. Multicolor slow fade
9. Four-color slow fade
10. Four-color rotation with a pulse to music
11. Four-color rotation
12. Off
---|---
Press & Hold the button for 1-2 sec to change the Strobe light modes. off Pulse to music Blink off
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
855-292-4087
www.alteclansing.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>