Jackery JS-40A SolarSaga 40 Mini Solar Panel User Manual
- June 1, 2024
- Jackery
Table of Contents
Jackery JS-40A SolarSaga 40 Mini Solar Panel
Technical Specifications
- Model: JS-40A
- SolarSaga 40 Mini
- Multifunctional Adapter
- USB-A Output: 5V 2.4A
- USB-C Output: 5V 3A
Package List
- SolarSaga 40 Mini
- Accessories Bag
- DC8020 to USB-C Adapter
- Multifunctional Solar Charging Cable
- User Manual
- Carabiner X2
Usage Instructions
Setting Up the Solar Panel
- Extend both sides of the panel as instructed.
- Unfold the panel completely.
Powering Your Device
Connect your device to the SolarSaga 40 Mini using the provided USB-A or
USB-C outputs. Make sure to use the DC8020 to USB-C adapter only for charging
Jackery power stations and not other devices.
Safety Precautions
Follow the provided safety tips for using solar panels to ensure safe
operation.
Warranty and Customer Service
Enjoy a 36-month limited warranty and lifetime technical support. For any
inquiries or quality-related issues, contact
hello.eu@jackery.com.
Contact Information
If you have any questions or comments, please email
hello.eu@jackery.com. For warranty claims,
visit www.jackery.com/support/.
FAQs
-
Q: Can I use the multifunctional solar charging cable with other solar panels?
A: No, the multifunctional solar charging cable is only suitable for charging the Jackery SolarSaga 40 Mini and should not be used with other solar panels. -
Q: What is the purpose of the DC8020 to USB-C adapter?
A: The DC8020 to USB-C adapter is designed for charging Jackery power stations specifically and should not be used for charging other devices.
Release the magnetic buckle.
Extend both sides of the panel.
Pull the concealed latch from the center to release it.
Unfold the panel completely.
Position it towards the sun and connect it to a portable power station.
TECHNICAL SPECIFICATIONS
SolarSaga 40 Mini
- Product Name SolarSaga 40 Mini
- Model JS-40A
- Maximum Power (Pmax) 40W±5%
- Unfolded Size Around 1020×300×18.5mm
- Folded Size Around 252×300×30mm
- Weight Around 2.6 Ibs / 1.2 kg
- Open circuit voltage (Voc) 25V±5%
- Short circuit current (Isc) 2.07A±5%
- Optimum Operating Voltage (Vmp) 20.9V±5%
- Optimum Operating Current (Imp) 1.91A±5%
- Operating Temperature Range -4℉~149℉(-20℃~65℃)
- Maximum System Voltage 30V
- Maximum Reverse Current 6A
- Protection Class Against Electric Shock Class III
- Waterproof Level IP68
- Consumer Goods Category IEC TS 63163 Consumer Product Category 1
- Voltage Temperature Coefficient -0.3%/°C
- Power Temperature Coefficient -0.39%/°C
- Maximum Number of Series Connections 1
- Maximum Number of Parallel Connections 3
STC (1000W/㎡, 25℃, AM 1.5).
Multifunctional Adapter
- USB-A Output 5V⎓2.4A
- USB-C Output 5V⎓3A
POWER YOUR DEVICE
Note: The DC8020 to USB-C adapter is only for charging Jackery power station; please do not use it for charging other devices.
PACKAGE LIST
This multifunctional solar charging cable is only suitable for charging the Jackery SolarSaga 40 Mini and should not be used with other solar panels.
SAFETY PRECAUTIONS WHEN USING
Solar Panel Safety Tips
- Do not flex or bend the folding solar panels.
- Do not place folding solar panels in shading places, while tree shades, buildings, and any other obstructions should be minimized.
- Do not soak the solar panels in water or other liquid.
- Do not clean the solar panel with water, please gently wipe it with a damp cloth.
- Do not use or store solar panels near open flames or flammable materials.
- Do not scratch the surface of solar panels with sharp objects.
- Prevent corrosive substances to damage solar panels.
- Do not step on or place heavy objects on the solar panels.
- Do not disassemble the solar panels.
- The output circuit of the solar panels must be correctly connected to the equipment. Please do not short-circuit the positive and negative poles. Ensure that there is no gap between the connector and the insulated connector. If there is a gap, sparks or electrical shocks will occur.
- Check the connection status of each component, including cables, wires and plugs.
WARRANTY
The product is covered by a limited warranty from Jackery for the original
purchaser that covers the product from defects in workmanship and materials
for 36 months from the date of purchase ( damages from normal wear and tear,
alteration, misuse, neglect, accident, service by anyone other than authorized
service center, or act of God are not included ). During the warranty period
and upon verification of defects, this product will be replaced when returned
with proper proof of purchase.
2 Years Extended Warranty: To activate the Warranty Extension, you must
register your product online or contact our customer service team at
hello.eu@jackery.com to extend the standard
warranty runtime.
CUSTOMER SERVICE
36-month limited warranty
Lifetime technical support
Email: hello.eu@jackery.com
CONTACT US
For any inquiries or comments concerning our products, please send an email to
hello.eu@jackery.com, and we will respond to
you as soon as possible. If there is any quality-related issue with the
product, you may request a replacement or refund by submitting a request form
at www.jackery.com/support/.
Manufacturer/Factory: Shenzhen Hello Tech Energy Co.,Ltd. Jiaanda Science
and technology industrial park, the east side of Huafan Road, Tongsheng
Community, Dalang Street, Longhua District, Shenzhen, Guangdong, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>