ALTECH MZX019 Bluetooth Headphone User Manual
- June 1, 2024
- ALTECH
Table of Contents
ALTECH MZX019 Bluetooth Headphone
MZX019 PLAY Wireless Headphone
QUICK START GUIDE
FCC ID: 2AL9B-MZX019
Do Not Return Card
IMPORTANT
- PLEASE DO NOT RETURN TO STORE
- If You’re Having Trouble, We’re Here to Help!
- Call us 24{7 at 1-855-292-4087
- E-mail us at [email protected] or visit us at alteclansing.com
WELCOME
Thank you for purchasing an Altec Lansing product. Download our App to unlock
all the features our products have to offer!
In the Box
A Closer Look
- Accept / End Call
- Power On/Off/Play/Pause
- Auxiliary Port
- LED indicator light
- Charging Port
- Previous Track/Volume –
- Next Track/Volume +
- Microphone
Charging
Connect the USB-C cable into the charging port to charge the headphone. The
headphone’s indicator will turn red while charging and turn off when it is
fully charged. 
Powering On
To turn on the headphones, press and hold the power button for 2-3 seconds.
The LED will flash Red and Blue alternately, indicating that the headphones
have entered Bluetooth pairing mode.
REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or firmware updates, warranty
information and more please register your product at
alteclansingsupport.com
Bluetooth Pairing
Once the headphones are on, search for and select ‘AL Play ‘ in your smart device’s Bluetooth pairing list. The LED light on the headphones will start to blink slowly in blue, indicating that the headphone is now connected successfully,
Controls
Functions Required action
-
Power ON/OFF
Press and hold the Power button for 2-3s -
Play/Pa1198 Music
When playing music, press the multi-function button to pause the music. Press again to resume playing the music. -
Accept/End/Reject call
When receive an incoming call, press the call button to accept call, press again to end c611. Press and hold the button to reject the incoming call. -
Volume control
Tap the’+’ button to increase the volume. Tap the’•’ button to decrease the volume. -
Next/ Previous track
Press and hold the’+’ button to adv6nce to the next track. Press 6nd hold the ‘·’ button to return to the previous track
Notes
- To use voice assistant, you must have a phone that is equipped with a voice assistant.
- You must be within Bluetooth range to use voice assistant via your headphone.
- Your headphone’s voice assistant feature will not work if a voice assistant is not first enabled within the settings on the phone. For more information, see your phone’s user manual.
For additional user materials and warranty information, please visit alteclanslng.com
FCCID: 2AL9B-MZX019
Oranges or modifications not expressly approved by the party responsible for
compliance could void the user s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any Interference received, Including Interference that may cause undesired operation.
-
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation.
-
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
- The device has been evaluated to meet general RF exposure requirement.
- The device can be used in the portable exposure condition without restriction.
Warranty
-
12 Month Limited Warranty
All Altec Lansing products come with 12 month limited warranty from the date of its original purchase -
24 Hour Customer Support
We love our customers, and we care about your experience with Altec Lansing. If you need assistance, please call us at 1.855.292.4087 or e-mail [email protected] www.alteclansing.com Altec Lansing Edison, NJ 08817