Altech Corp PSC-24124 Power Supplies Owner’s Manual
- August 7, 2024
- Altech Corp
Table of Contents
Altech Corp PSC-24124 Power Supplies Owner’s Manual
Features:
- Universal AC input (88-264V AC)
- High efficiency 92% and low power dissipation
- Installed on DIN rail TS-35 / 7.5 or 15
- Built-in active PFC function, PF > 0.95
- 150% peak load capability
- 100% full load burn-in test
- Protection: SCP, OLP, OVP, OTP
- Two selectable peak load modes
- Built-in DC OK Relay contact
- Built-in Remote ON / OFF function
- 3 years warranty
- UL 508
Mechanical Drawings
Block Diagram
DC OK Relay Contact
Peak Load SW1 ON (Mode1) Default setting
T-peak presents while the unit is working within 110%~150% Rating output power. See curve ” B ” for the variation in T-peak between output current and holdup time. If T-peak is more than the time setting in curve “B”, the output current will drop to the constant current limit (I-normal) that is 105% rating power, meanwhile, I- normal and T-normal will be presenting. See curve “A” for the timing back to I-Peak of T-normal and this Mode can use for easy 2-stage battery charger.
Peak Load SW2 OFF (Mode2)
T-peak presents while the unit is working within 110%~150% Rating output power. See curve ” B ” for the variation in T-peak between output current and holdup time. If T-peak is more than the time setting in curve “B”, the output current will be shut down for 3~4 sec, then auto-recovery.
Remote ON/OFF
The PSU can be turned ON /OFF by using the “Remote Control” function.
Derating Curve
Ambient Temperature (°C) AC=230 / 1 15V AC
Output derating VS input coltage
Input Voltage(V)60Hz Ta=25 °C
For the latest on Altech Power Supplies please visit www.altechcorp.com/power.
Altech Corp. ® , 35 Royal Road , Flemington, NJ 08822-6000 , Phone (908)806-9400 , FAX (908)806-9490