HARBOR FREIGHT 64353 16 Inch End Locker Owner’s Manual
- June 6, 2024
- HARBOR FREIGHT
Table of Contents
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and
precautions, assembly, operating, inspection, maintenance, and cleaning
procedures. Write the product’s serial number in the back of the manual near
the assembly diagram (or month and year of purchase if the product has no
number).
Keep this manual and the receipt in a safe and dry place for future reference.
16” End Locker
Visit our website at: http://www.harborfreight.com
Email our technical support at:
productsupport@harborfreight.com
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken, please call
1-888-866-5797 as soon as possible.
Copyright©2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, the actual product may differ slightly from the product
described herein.
Tools required for assembly and service may not be included.
WARNING
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Total Combined Weight Capacity
(Evenly distributed from bottom up.)| 280 lb
---|---
IMPORTANT SAFETY INFORMATION
Assembly Precautions
- Assemble only according to these instructions. Mount only on side of Bottom Cabinet according to instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
- Weight capacity and other product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting loaded Cabinet.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
- This product is not a toy nor a toy chest. Do not allow children to play with or near this item.
- Do not exceed weight capacities, evenly distributed from the bottom up. Be aware of dynamic loading! The sudden load movement may briefly create excess load causing product failure.
- Do not move or lift while loaded.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
- Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Assembly and Mounting Instructions
**** Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
Assembly
Note: The door can be attached to either side of the Cabinet.
-
Attach Handle (1) to door with Handle Screws (2).
-
Place Hanging Rod (11) into Hanging Rod Supports.
-
Install four Shelf Brackets (8) into vertical rails in Locker’s interior for each shelf. Install them so that the Shelf will rest level.
-
Place Shelves on Shelf Brackets.
Mounting
-
Remove the handle from the side of the Bottom Cabinet.
-
Using an assistant, place EMPTY End Cabinet onto either side of Bottom Cabinet, making sure lips on End Cabinet fit securely over edge of Bottom Cabinet.
-
Secure End Cabinet to Bottom Cabinet from the inside, using Mounting Bolts (9).
-
Secure End Cabinet to Bottom Cabinet from underneath, using Mounting Bolts (10).
-
Insert Plugs (12) into holes on another side of the Cabinet.
Operation Instructions
**** Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
Fill the End Cabinet evenly, from bottom to top. Do not exceed weight capacities.
Maintenance and Servicing
**** Procedures not specifically explained in this manual must be performed only by a qualified technician.
WARNING
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged, have the problem
corrected before further use.
-
PERIODICALLY, inspect the general condition of the Cabinet. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• any other condition that may affect its safe operation. -
Wipe external surfaces of the Cabinet with a clean cloth.
-
Lubricate Drawer Slides as needed.
Parts List and Diagram
Parts List
Part| Description|
Qty
---|---|---
1| Handle| 1
2| Handle Screw| 2
3| Drawer| 1
4| Drawer Liner (not shown)| 1
5| Drawer Label (not shown)| 1
6| Fixed Shelf| 1
7| Adjustable Shelf| 2
8| Shelf Bracket (not shown)| 8
9| Mounting Bolt (M6x20)| 2
10| Mounting Bolt (M8x16)| 2
11| Hanging Rod| 1
12| Plug (not shown)| 2
13| Key (not shown)| 3
Record Serial Number Here:
Note: If the product has no serial number, record the month and year of
purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts. Parts may not be
interchangeable.
Specify UPC number when ordering parts:
Red: 193175452290
Black: 193175470690
Blue: 193175470676
Assembly Diagram
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear, and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>