JOYROOM JR-ZS241 Vehicular Wireless Charging Bracket User Manual
- June 6, 2024
- Joyroom
Table of Contents
JOYROOM JR-ZS241 Vehicular Wireless Charging Bracket
Product Overview
Parameter
- Product model: JR-ZS 241
- Name: Wireless car charger holder
- Color: black
- Material: ABS+ PC
- Input: 5V=2A 9V=2A 12V=l.5A
- Output: SW /7.SW /10W /15W (Max)
- Input port: Type-C
- Applicable size: 4.5~6.8 inches
component assembly Dashboard
-
step 1:
Connect the dashboard accessories to the product put the universal ball into the nut, and then insert it into the back bolt of the device; tightening the nut clockwise;
-
Step 2:
Clean the windshield or dashboard where you need to install the car mount with a wet doth, and wait for it to dry: -
Step I:
Fix the suction a.ip base on t he dashboard, and then tighten t he fixing knob of the base to f ix it.
Instructions
- Connect t he holder with the car charger by the Type-C charging cable in the package.
- Press the side mechanical button to open t he clamping arm
Indicator function
| Power an | The red and blue lights flash. |
|---|---|
| Standby | The red light keeps on. |
| Charging | The blue light flashes slowly. |
| FOD(Foreign body detection) | The red light flashes quickly. |
Manually Adjust the Charging Gear
FAQ
- Q: Why can’t the mobile phone be charged aft:er connecting with the device?
A:.
1. Please check whether the mobile phone supports wireless charging function;
2. Please check whether the wireless car charger holder is powered on;
3. If there are no above problems, please check whether the coil circle central of the holder is aligned with the coil center of t he mobile phone. And if not. please stretch the bottom support to adjust the position to align with the charging sensing area.
4. Please contact the customer service if this device still can’t support charging it.
Attention
- This product is suitable for -20 75 degree temperature environment
- Suitab~ for use in sealed (non-breathable) automotive instrument panels, sud, as: plastic panels, F;VA surfaces; can not be used on leather, textile flannel .surfaces
- The .suction position of the suction cup is flat (not aJrved or meandered), and the surface texture should not be too rough (the groove width is less than 05mm thickness)
- The slue suction cup should be kept clean. After the surface is dirty, it can be washed with water, dried and then used
- Suction plate pr’e$Sur’e valve keeps open when packaged and not in use, ensuring product life
- Remove the suction cup by using the pull tab
Warning
- Do not dismantle t he product or refit It by yourself.
- Do not put this product in a humid environment
- Please do not charge the product near the heat source or around it
- Do not let water or other liquids flow into the internal interface of this product. otherwise it may cause damage to the product.
- Do not install the wireless charger on the airbag cover or airbag deployment area.
- Please remove the metal and magnetic protective case or card (such as bank card) from your device when charging it.
- It is nonmal to generate heat when charging and will not affect the performance of the product. But if you feel t hat t he phone or the product is overheated, please disconnect the power supply and charge it after cooling down.
- Avoid using the bent or damaged USS cables please.
Instruction of after-sale services
Thinks to my dear users for using our products. In order to protect your rights 11n:::l interests, you’d better know clearly t:hi!t distribution agents and compenies bear the responsibility of product malntenance. replacement and return. Plea9e refer to the fbllowtng Items:
- Prcduct warranty CZ!rd, necessary credentiat which can provide illf’ter-sales service for free during t he warranty period
- According to the principle of ·who .sell~ who is responsible for the Three Guarantees”, you am contact: the dmributor by providing witt, the werranty(product gua,rantees card) if the product causes qU11lity pl’Obtems. The di5tributor will service the customer. while our company will support the distributor. lhe company undertakes that ifthere is illny quality problem within 7 days m:::lm the d!lte of Sl!lle(the date is veltd, the dllte of the b~I shall prevaiO, the cust.omer can choose to retum the product tor N!lplacement and provide mitlntenilnCEi service tor you. Or If tne oca.ired Cf,Jallty problems beyOnd warranty period, we can provide llfetlme maintenance service for yi,u (each after-sales S8M09 site only dlarges fees for oomponent materials); please fill in the warranty (product guarantees card) with dimibutor when purchasing;
- Warranty exceptions:
- Exceed the Warranty service time.
- Damage caused by using, m11intnining, keeping it not
Warranty Card
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and
2)this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residentialinstallation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not
occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>