clearaudio RB 250 Arms Require RB 300 End Stub Instructions
- June 6, 2024
- clearaudio
Table of Contents
Turbo Weight
for Rega 300-600-900 / RB 250 arms require RB 300 end stub
Congratulations to your decision to purchase the Turbo Weight.
The stock weight on your Rega tonearm vibrates as the stylus moves in the
groove causing tracking errors that muddy the sound.
As a result of its construction (lower angle) and precision machining the
Turbo
Weight does not vibrate in this matter.
To reach this sound-improvement just follow these easy instructions.
- First set the tonearm to the rest position. Then twist the weight clockwise and pull off.
- Now clean the end of the tonearmtube, where the Turbo Weight should be placed.
- Slide the Turbo Weight forward on the tonearm. Set tracking force by following the manufacturers instructions. At least fix the Turbo Weight in this position with the mounted milled screw.
Clearaudio Electronic accepts no liability for any misprints.
Technical specifications are subject to change or improvement without prior
notice.
Product availability is as long as stock lasts.
Copies and reprints of this document, including extracts, require written
consent from
Clearaudio Electronic GmbH, Germany.
Handmade in Germany
© clearaudio electronic GmbH, 2021-07
Made in Germany