clearaudio cr-289 MC Moving Coil Cartridge User Manual
- June 6, 2024
- clearaudio
Table of Contents
**cr-289 MC
Moving Coil Cartridge
User Manual
**
Dear Clearaudio customer,
Thank you for choosing a high-quality audio product from Clearaudio electronic
GmbH..
Clearaudio cartridges reach the highest possible standard “Made in
Germany”. Meticulously handcrafted in Germany each Clearaudio cartridge
delivers excellence in sound. Our ongoing research and improvement of our
patent-registered MC-cartridges ensure they stay on the leading edge of analog
engineering.
The Jubilee MC is the first Clearaudio moving coil cartridge made of armored
wood and its shape is reminiscent of the masterpieces of the V2 moving coil
series.
The name „Jubilee” MC and MM was inspired by Clearaudio’s 40th anniversary,
uniting four decades of dedication to “loving music”.
Please note: This user manual gives you valuable information for the
correct installation of your cartridge. For fine adjustment, however, we
can only provide general guidelines, since optimal adjustment will depend on
your specific tonearm and turntable.
We wish you much musical enjoyment with your new Jubilee MC cartridge
Clearaudio electronic GmbH
CAUTION: NOT SUITABLE FOR SHELLAC RECORDS (78rpm).
This phono cartridge is only for mounting on tonearms and must not be used for
other purposes.
Included accessories
- Allen key 2mm
- Cartridge mounting screws 2 pcs. M2,5 x 6mm; 2 pcs. M2,5 x 10mm
- User manual
- Warranty card
- Return delivery note
Additional analog accessories are available at:
www.analogshop.de.
The following are recommended:
- Clearaudio Test Record (Art. No. LP43033)
- Clearaudio Break-In Test Record (Art. No. BIN070904)
- Clearaudio Setting Template (Art. No. AC005/IEC)
- Clearaudio Weight Watcher touch (Art. No. AC163)
- Clearaudio Elixir of Sound (Art. No. AC003)
- Clearaudio Diamond cleaner brush (Art. No. AC014)
Mounting procedure
Take the cartridge out of the packaging. To avoid damage, we recommend leaving
the stylus guard on the cartridge while mounting the cartridge onto the
tonearm.
Use the screws provided to mount your Clearaudio MC cartridge (the cartridge
threads in the body comply with the metric standard for M 2.5mm screws and
have the standard spacing of 12.7mm).
Be careful not to over-tighten the screws as they may strip the threaded
holes.
Now connect the pins of your Clearaudio cartridge to the jacks of the
headshell or tonearm cable, taking care not to use too much force.
If necessary, you can use suitable precision pliers or tweezers for
assistance.
Please note the color-coding below in order to ensure the correct phase in
music playback, otherwise, an audible sound deterioration would result.
Pic. 1: Colour marking of the signal pins
We recommend the following order of assembly:
- Mount the MC cartridge into the tonearm.
- Connect the tonearm or turntable ground with the preamplifier ground (before plugging in the electrical power supply).
- Plug the tonearm cable into the phono inputs of your preamplifier.
- Turn down the volume control to a minimum position (position 0).
- Plug the mains power cord into your electrical power supply.
Our tip for mounting the cartridge:
Choose a bright workplace and good tools, and take your time so you can
concentrate.
**Adjustment of the tracking force
**
Carefully remove the stylus guard from the cartridge by grasping it with your
thumb and forefinger and gently pulling it forward.
The correct tracking force of your cartridge can be found in the technical
data in this user manual. Please only use these values, since if the tracking
force is too light (1g or less) the cartridge could jump out of the record
groove and damage the needle.
However, you should never set a tracking force of more than 5gas this could
cause damage to the diamond and thus to the cartridge. In the event that it is
not possible to set the optimal tracking force due to the cartridge being too
light, you should use a spacer plate available from your Clearaudio
importer/dealer.
Further valuable information for the correct adjustment of your cartridge can
be found in the respective user manual of the turntable and/or tonearm
manufacturer.
Special instructions
-
Before playing a record, please remove all dust and dirt from the record’s surface using a quality cleaning device. For the best results, a record cleaning machine should be used. Ask your dealer about Clearaudio´s record cleaning machines.
-
Always keep the stylus tip clean. When dirt is allowed to build up and records are played with a dirty or clogged stylus, a buzzing noise may be heard. Use a soft brush or a high-quality cleaning brush or Clearaudio cleaning fluid (Art. No. AC003) to clean the stylus tip. Be extremely careful and always brush only from back to front. When using a liquid e.g. from Clearaudio or another organic cleaner, always take care not to spill any on the cartridge body. Make sure the liquid only contacts the stylus tip or boron cantilever. Avoid storing the cartridge near devices with electrical transformers and motors that can generate magnetic fields. Any demagnetization could lead to a loss of the output voltage and thus to a distortion or deterioration of the sound.
-
Please note:
Never disconnect your tonearm cable from your pre-amplifier while your unit is still on. Please switch your pre-amplifier off before starting to disconnect your tonearm connectors from the phono inputs of your pre-amplifier. -
Always use the original packaging when shipping the cartridge and secure the stylus guard with a rubber band.
-
If any service or repair to a Clearaudio product is necessary, please contact your dealer/distributor. We can advise you of your nearest service location.
Important – please note:
Do not try to remove the stylus assembly yourself. Please contact your
dealer/distributor.
Any damage caused by failure to follow the advice given in the Clearaudio
user manual will invalidate the product warranty. Clearaudio will assume
no liability for any such damage.
PLEASE RETAIN ALL ORIGINAL PACKAGING.
You will need it if this unit has to be transported and/or shipped. Any
further questions you may have about your product should be directed to your
dealer or distributor.
Clearaudio wishes you much enjoyment of your music!
Technical data
| concept mc| essence mc
---|---|---
Total mass:| 8.0g| 8.0g
Frequency response:| 20Hz – 20kHz| 20Hz – 20kHz
Output voltage (at 5 cm/sec):| 0.4mV| 0.4mV
Channel separation:| > 28dB| > 30dB
Channel balance:| < 0.5dB| < 0.5dB
Tracking ability:| 80μm| 80μm
Recommended tracking force:| 2.2g (± 0.2g)| 2.2g (± 0.2g)
Cartridge impedance:| 11Ω| 11Ω
Cantilever / stylus shape:| Boron / Micro Line| Boron / Micro Line
Compliance:| 9μ/mN| 9μ/mN
Coil assembly:| —| —
Coil material:| OFC – copper| OFC – copper
Cartridge body:| Aluminium-magnesium alloy with a ceramic surface layer|
Aluminium-magnesium alloy with a ceramic surface layer
Manufacturer’s warranty:| 2 years| 2 years
*Provided that the warranty card is correctly completed and returned to Clearaudio, or your product is registered online at https://clearaudio.de/en/service/registration.php, within 14 days of purchase.
The full, extended warranty period for the Jubilee MC cartridge is 2 years.
To receive this full Clearaudio warranty, you must either complete and return
the relevant section
of the warranty registration card to Clearaudio, or register your product
online at https://clearaudio.de/en/service/registration.php, within 14 days
of purchase.
Otherwise only the legal warranty of 1 year can be considered.
The full 2-year warranty can only be honored if the product is returned in its
original packing.
WARRANTY
For warranty information, contact your local Clearaudio distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase. It
should be kept in a safe place to be referred to as necessary for insurance
purposes or when corresponding with Clearaudio.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to
establish proof and date of purchase. Your purchase receipt or invoice is
adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer‘s statutory rights and does not
affect those rights in any way.
clear audio electronic GmbH
Spardorfer Straße 150
91054 Erlangen
Germany
Phone /Tel.: +49 9131 40300 100
Fax: +49 9131 40300 119
www.clearaudio.de
www.analogshop.de
[email protected]
Clearaudio Electronic accepts no liability for any misprints.
Technical specifications are subject to change or improvement without prior
notice.
Product availability is as long as stock lasts.
Copies and reprints of this document, including extracts, require written
consent from Clearaudio Electronic GmbH, Germany.